Search

Objective: To validate whether applying a well-defined initial three-dimensional (3D) load can create consistently expected tooth movement in patients. Materials and Methods: Twenty-one patients who needed bilateral canine retraction to close extraction space were selected for this split-mouth clinical trial. After initial alignment and leveling, two canines in each patient were randomly assigned to receive either translation (TR) or controlled tipping (CT) load. The load was delivered by segmental T-loops designed to give specific initial moment/force ratios to the canines in each treatment interval (TI), verified with an orthodontic force tester. Maxillary dental casts were made before canine retraction and after each TI. The casts were digitized with a 3D laser scanner. The digital models were superimposed on the palatal rugae region. The 3D canine displacements and the displacement patterns in terms of TR, CT, and torque were calculated for each TI. Results: The method can reliably detect a TR displacement greater than 0.3 mm and a rotation greater than 1.5°. Ninety-two Tis had displacements that were greater than 0.3 mm and were used for further analysis. Most displacements were oriented within ±45° from the distal direction. The displacement pattern in terms of TR or CT was not uniquely controlled by the initial moment/force ratio. Conclusions: The initial load system is not the only key factor controlling tooth movement. Using a segmental T-loop with a well-controlled load system, large variations in canine displacement can be expected clinically. [ABSTRACT FROM AUTHOR]

Objective: To establish an association between patient personality traits and potential willingness to undergo various orthodontic treatments. Materials and Methods: One hundred adolescent individuals aged 12-16 years completed an anonymous electronic questionnaire via Survey Monkey. The 24-item questionnaire contained three major sections: patient demographics, a modified Big Five Inventory (BFI)-10 personality index, and a willingness to undergo treatment assessment. Multiple-variable linear regression analyses were used to determine the associations among age, gender, ethnicity, and the five personality traits simultaneously with willingness to undergo treatment. Statistical significance was set at P ⩽ .05. Results: Ninety-six of the 100 individuals were included in the statistical analysis. Age, ethnicity, and gender failed to correlate with potential willingness to undergo orthodontic treatment. Several personality dimensions within the modified BFI-10 (agreeableness, conscientiousness, and neuroticism) were significantly associated with willingness to undergo various orthodontic treatments (P ⩽ .05). Agreeableness demonstrated positive correlations with five treatment modalities, while both conscientiousness and neuroticism exhibited negative associations with a single treatment modality. Openness and extraversion were the only personality dimensions that failed to associate with any of the treatment modalities. Four of the nine treatment modalities had no association with patient demographics or a patient's personality dimensions. Conclusions: Personality traits are useful in predicting a patient's potential willingness to participate in various orthodontic treatments. The agreeableness dimension provided the most utility in predicting patient willingness. Age, ethnicity, and gender were not significant in predicting patient willingness. [ABSTRACT FROM AUTHOR]

Objective: To quantify the three-dimensional moments and forces produced by pretorqued nickeltitanium (NiTi) rectangular archwires fully engaged in 0.018- and 0.022-inch slots of central incisor and molar edgewise and prescription brackets. Materials and Methods: Ten identical acrylic dental models with retroclined maxillary incisors were fabricated for bonding with various bracket-wire combinations. Edgewise, Roth, and MBT brackets with 0.018- and 0.022-inch slots were bonded in a simulated 2x4 clinical scenario. The left central incisor and molar were sectioned and attached to load cells. Correspondingly sized straight and pretorqued NiTi archwires were ligated to the brackets using 0.010-inch ligatures. Each load cell simultaneously measured three force (Fx, Fy, Fz) and three moment (Mx, My, Mz) components. The faciolingual, mesiodistal, and inciso-occluso/apical axes of the teeth corresponded to the x, y, and z axes of the load cells, respectively. Each wire was removed and retested seven times. Three-way analysis of variance (ANOVA) examined the effects of wire type, wire size, and bracket type on the measured orthodontic load systems. Interactions among the three effects were examined and pair-wise comparisons between significant combinations were performed. Results: The force and moment components on each tooth were quantified according to their local coordinate axes. The three-way ANOVA interaction terms were significant for all force and moment measurements (P < .05), except for Fy (P > .05). Conclusion: The pretorqued wire generates a significantly larger incisor facial crown torquing moment in the MBT prescription compared to Roth, edgewise, and the straight NiTi wire. [ABSTRACT FROM AUTHOR]

Objective: To observe the real-time microarchitecture changes of the alveolar bone and root resorption during orthodontic treatment. Materials and Methods: A 10 g force was delivered to move the maxillary left first molars mesially in twenty 10-week-old rats for 14 days. The first molar and adjacent alveolar bone were scanned using in vivo microcomputed tomography at the following time points: days 0, 3, 7, and 14. Microarchitecture parameters, including bone volume fraction, structure model index, trabecular thickness, trabecular number, and trabecular separation of alveolar bone, were measured on the compression and tension side. The total root volume was measured, and the resorption crater volume at each time point was calculated. Univariate repeated measures analysis of variance with Bonferroni corrections were performed to compare the differences in each parameter between time points with significance level at P < .05. Results: From day 3 to day 7, bone volume fraction, structure model index, trabecular thickness, and trabecular separation decreased significantly on the compression side, but the same parameters increased significantly on the tension side from day 7 to day 14. Root resorption volume of the mesial root increased significantly on day 7 of orthodontic loading. Conclusions: Real-time root and bone resorption during orthodontic movement can be observed in 3 dimensions using in vivo micro-CT. Alveolar bone resorption and root resorption were observed mostly in the apical third on day 7 on the compression side; bone formation was observed on day 14 on the tension side during orthodontic tooth movement. [ABSTRACT FROM AUTHOR]

Objective: To test the effect of alcohol on force decay of elastomeric chains in vitro in order to determine if increasing alcohol concentrations results in an increased amount of elastomeric chain force decay. Materials and Methods: A prospective laboratory study was completed to test the effect of alcohol exposure on orthodontic elastomeric chain. A total of 450 specimens were divided into five test groups. Two test groups were each exposed to different alcohol concentrations (14% and 26.9%) and the other two test groups were exposed to different commercially available mouth rinses (Cëpacol -14% alcohol and Listerine - 26.9% alcohol) for 60 seconds twice a day. The control group followed all of the same procedures but was only exposed to deionized (Dl) water. Force measurements were taken at six time points (initial, 1 day, 7 days, 14 days, 21 days, and 28 days). Results: There were no significant differences among groups at the initial time point (P = .52). Statistically significant effects of time on force decay were seen in all groups. All test groups showed significantly more force decay than the control group. Only a few statistically significant differences were observed when comparing force decay among the test groups. Conclusions: Alcohol causes an increase in force decay of elastomeric chain over time. A concentration dependence of alcohol on force decay of elastomeric chain was not observed. [ABSTRACT FROM AUTHOR]

Objective: To validate whether applying a well-defined initial three-dimensional (3D) load can create consistently expected tooth movement in patients., Materials and Methods: Twenty-one patients who needed bilateral canine retraction to close extraction space were selected for this split-mouth clinical trial. After initial alignment and leveling, two canines in each patient were randomly assigned to receive either translation (TR) or controlled tipping (CT) load. The load was delivered by segmental T-loops designed to give specific initial moment/force ratios to the canines in each treatment interval (TI), verified with an orthodontic force tester. Maxillary dental casts were made before canine retraction and after each TI. The casts were digitized with a 3D laser scanner. The digital models were superimposed on the palatal rugae region. The 3D canine displacements and the displacement patterns in terms of TR, CT, and torque were calculated for each TI., Results: The method can reliably detect a TR displacement greater than 0.3 mm and a rotation greater than 1.5°. Ninety-two TIs had displacements that were greater than 0.3 mm and were used for further analysis. Most displacements were oriented within ±45° from the distal direction. The displacement pattern in terms of TR or CT was not uniquely controlled by the initial moment/force ratio., Conclusions: The initial load system is not the only key factor controlling tooth movement. Using a segmental T-loop with a well-controlled load system, large variations in canine displacement can be expected clinically.

Objective: To observe the real-time microarchitecture changes of the alveolar bone and root resorption during orthodontic treatment., Materials and Methods: A 10 g force was delivered to move the maxillary left first molars mesially in twenty 10-week-old rats for 14 days. The first molar and adjacent alveolar bone were scanned using in vivo microcomputed tomography at the following time points: days 0, 3, 7, and 14. Microarchitecture parameters, including bone volume fraction, structure model index, trabecular thickness, trabecular number, and trabecular separation of alveolar bone, were measured on the compression and tension side. The total root volume was measured, and the resorption crater volume at each time point was calculated. Univariate repeated measures analysis of variance with Bonferroni corrections were performed to compare the differences in each parameter between time points with significance level at P < .05., Results: From day 3 to day 7, bone volume fraction, structure model index, trabecular thickness, and trabecular separation decreased significantly on the compression side, but the same parameters increased significantly on the tension side from day 7 to day 14. Root resorption volume of the mesial root increased significantly on day 7 of orthodontic loading., Conclusions: Real-time root and bone resorption during orthodontic movement can be observed in 3 dimensions using in vivo micro-CT. Alveolar bone resorption and root resorption were observed mostly in the apical third on day 7 on the compression side; bone formation was observed on day 14 on the tension side during orthodontic tooth movement.