Search

Solar‐driven photocatalysis employing particulate semiconductors represents a promising approach for sustainable production of valuable chemical feedstock. Metal poly(heptazine imide) (MPHI), a novel 2D ionic carbon nitride, has been recognized as an emerging photocatalyst with distinctive properties. In this minireview, we first delineate the forefront innovations of MPHI photocatalysts, spanning from synthetic strategies and solving structures to the exploration of novel properties. We place special emphasis on the structural design principles aimed at developing high‐performance MPHI systems toward photocatalytic solar fuel production such as H2 evolution, H2O oxidation, H2O2 production and CO2 reduction. Finally, we discuss crucial insights and challenges in leveraging highly active MPHIs for efficient solar‐to‐chemical energy conversion. [ABSTRACT FROM AUTHOR]

Efficient and low‐cost anode materials for the sodium‐ion battery are highly desired to enable more economic energy storage. Effects on an ultrathin carbon nitride film deposited on a copper metal electrode are presented. The combination of effects show an unusually high capacity to store sodium metal. The g‐C3N4 film is as thin as 10 nm and can be fabricated by an efficient, facile, and general chemical‐vapor deposition method. A high reversible capacity of formally up to 51 Ah g−1 indicates that the Na is not only stored in the carbon nitride as such, but that carbon nitride activates also the metal for reversible Na‐deposition, while forming at the same time an solid electrolyte interface layer avoiding direct contact of the metallic phase with the liquid electrolyte. [ABSTRACT FROM AUTHOR]

Polymeric carbon nitride (PCN) is usually synthesized from nitrogen‐rich monomers such as cyanamide, melamine, and urea, but is rather disordered in many cases. Now, a new allotrope of carbon nitride with internal heterostructures was obtained by co‐condensation of very electron poor monomers (for example, 5‐amino‐tetrazole and nucleobases) in the presence of mild molten salts (for example, NaCl/KCl) to mediate the polymerization kinetics and thus modulate the local structure, charge carrier properties, and most importantly the HOMO and LUMO levels. Results reveal that the as‐prepared NaK‐PHI‐A material shows excellent photo‐redox activities because of a nanometric hetero‐structure which enhances visible light absorption and promotes charge separation in the different domains. [ABSTRACT FROM AUTHOR]

Conventional photosensing devices work mainly by electron processing and transport, while visual systems in intelligence work by integrative ion/electron signals. To realize smarter photodetectors, some photoionic device or the combination of ionic and electronic devices are necessary. Now, an ion‐transport‐based self‐powered photodetector is presented based on an asymmetric carbon nitride nanotube membrane, which can realize fast, selective, and stable light detection while being self‐powered. Local charges are continuously generated at the irradiated side of the membrane, and none (fewer) at the non‐irradiated side. The resulting surface charge gradient in carbon nitride nanotube will drive ion transport in the cavity, thus realizing the function of ionic photodetector. With advantages of low cost and easy fabrication process, the concept of ionic photodetectors based on carbon nitride anticipates wide applications for semiconductor biointerfaces. [ABSTRACT FROM AUTHOR]

Photocatalytic water splitting is a promising and clean way to mimic plant photosynthesis in a sustainable manner. Improvements of the quantum efficiency and optical absorption in the relevant range are necessary steps to approach practicality. Herein, we reported that these issues can be readily addressed when 5‐aminotetrazole, a monomer with high nitrogen content, is used for the synthesis of carbon nitride. The molten salt mixture NaCl/KCl is used as a high‐temperature solvent to tailor the grain boundary structure and chemistry. Visible light quantum efficiency for H2 production of 0.65 could be obtained in the presence of K2HPO4 as a double layer modifier. This value is very high, considering that this number depends on light to charge couple conversion, charge localization, as well as a successful oxidation and reduction reaction. Polymeric carbon nitride with enhanced optical absorption and photocatalytic activities is synthesized via a one‐pot ionothermal polymerization of 5‐aminotetrazole in eutectic NaCl/KCl. This approach allows control of the polymerization process and tailoring of the grain boundary structure and catalytic properties. [ABSTRACT FROM AUTHOR]

Abstract: Solid reagents, leaching catalysts, and heterogeneous photocatalysts are commonly employed in batch processes but are ill‐suited for continuous‐flow chemistry. Heterogeneous catalysts for thermal reactions are typically used in packed‐bed reactors, which cannot be penetrated by light and thus are not suitable for photocatalytic reactions involving solids. We demonstrate that serial micro‐batch reactors (SMBRs) allow for the continuous utilization of solid materials together with liquids and gases in flow. This technology was utilized to develop selective and efficient fluorination reactions using a modified graphitic carbon nitride heterogeneous catalyst instead of costly homogeneous metal polypyridyl complexes. The merger of this inexpensive, recyclable catalyst and the SMBR approach enables sustainable and scalable photocatalysis. [ABSTRACT FROM AUTHOR]

Polymeric or organic semiconductors are promising candidates for photocatalysis but mostly only show moderate activity owing to strongly bound excitons and insufficient optical absorption. Herein, we report a facile bottom-up strategy to improve the activity of a carbon nitride to a level in which a majority of photons are really used to drive photoredox chemistry. Co-condensation of urea and oxamide followed by post-calcination in molten salt is shown to result in highly crystalline species with a maximum π-π layer stacking distance of heptazine units of 0.292 nm, which improves lateral charge transport and interlayer exciton dissociation. The addition of oxamide decreases the optical band gap from 2.74 to 2.56 eV, which enables efficient photochemistry also with green light. The apparent quantum yield (AQY) for H2 evolution of optimal samples reaches 57 % and 10 % at 420 nm and 525 nm, respectively, which is significantly higher than in most previous experiments. [ABSTRACT FROM AUTHOR]

Photocatalytic Diels-Alder (D-A) reactions with electron rich olefins are realized by graphitic carbon nitride (g-C3N4) under visible-light irradiation and aerobic conditions. This heterogeneous photoredox reaction system is highly efficient, and the apparent quantum yield reaches a remarkable value of 47 % for the model reaction. Dioxygen plays a critical role as electron mediator, which is distinct from the previous reports in the homogeneous RuII complex photoredox system. Moreover, the reaction intermediate vinylcyclobutane is captured and monitored during the reaction, serving as a direct evidence for the proposed reaction mechanism. The cycloaddition process is thereby determined to be the combination of direct [4+2] cycloaddition and [2+2] cycloaddition followed by photocatalytic rearrangement of the vinylcyclobutane intermediate. [ABSTRACT FROM AUTHOR]

A novel type of quantum dot (Ph-CN) is manufactured from graphitic carbon nitride by 'lining' the carbon nitride structure with phenyl groups through supramolecular preorganization. This approach requires no chemical etching or hydrothermal treatments like other competing nanoparticle syntheses and is easy and safe to use. The Ph-CN nanoparticles exhibit bright, tunable fluorescence, with a high quantum yield of 48.4 % in aqueous colloidal suspensions. Interestingly, the observed Stokes shift of approximately 200 nm is higher than the maximum values reported for carbon nitride based fluorophores. The high quantum yield and the large Stokes shift are related to the structural surface organization of the phenyl groups, which affects the π-electron delocalization in the conjugated carbon nitride networks and induces colloidal stability. The remarkable performance of the Ph-CN nanoparticles in imaging is demonstrated by a simple incubation study with HeLa cells. [ABSTRACT FROM AUTHOR]

Graphitic carbon nitride has been predicted to be structurally analogous to carbon-only graphite, yet with an inherent bandgap. We have grown, for the first time, macroscopically large crystalline thin films of triazine-based, graphitic carbon nitride (TGCN) using an ionothermal, interfacial reaction starting with the abundant monomer dicyandiamide. The films consist of stacked, two-dimensional (2D) crystals between a few and several hundreds of atomic layers in thickness. Scanning force and transmission electron microscopy show long-range, in-plane order, while optical spectroscopy, X-ray photoelectron spectroscopy, and density functional theory calculations corroborate a direct bandgap between 1.6 and 2.0 eV. Thus TGCN is of interest for electronic devices, such as field-effect transistors and light-emitting diodes. [ABSTRACT FROM AUTHOR]

Efficient and low-cost electrocatalysts for the hydrogen evolution reaction are highly desired for future renewable energy systems. Described herein is the reduction of water to hydrogen using a metal-free carbon nitride electrocatalyst which operates in neutral and alkaline environments. An efficient, easy, and general method for growing ordered carbon nitride on different electrodes was developed. The metal-free catalyst demonstrates low overpotential values, which are comparable to those of non-noble metals, with reasonable current densities. The facile deposition method enables the fabrication of many electronic and photoelectronic devices based on carbon nitride for renewable energy applications. [ABSTRACT FROM AUTHOR]