Search

Glycerol is a byproduct of biodiesel production. Selective photoelectrochemical oxidation of glycerol to high value‐added chemicals offers an economical and sustainable approach to transform renewable feedstock as well as store green energy at the same time. In this work, we synthesized monoclinic WO3 nanosheets with exposed (002) facets, which could selectively oxidize glycerol to glyceric acid (GLYA) with a photocurrent density of 1.7 mA cm−2, a 73 % GLYA selectivity and a 39 % GLYA Faradaic efficiency at 0.9 V vs. reversible hydrogen electrode (RHE) under AM 1.5G illumination (100 mW cm−2). Compared to (200) facets exposed WO3, a combination of experiments and theoretical calculations indicates that the superior performance of selective glycerol oxidation mainly originates from the better charge separation and prolonged carrier lifetime resulted from the plenty of surface trapping states, lower energy barrier of the glycerol‐to‐GLYA reaction pathway, more abundant active sites and stronger oxidative ability of photogenerated holes on the (002) facets exposed WO3. Our findings show great potential to significantly contribute to the sustainable and environmentally friendly chemical processes via designing high performance photoelectrochemical cell via facet engineering for renewable feedstock transformation. [ABSTRACT FROM AUTHOR]

Bismuth Vanadate (BiVO4) photoanode has been popularly investigated for promising solar water oxidation, but its intrinsic performance has been greatly retarded by the direct pyrolysis method. Here we insight the key restriction of BiVO4 prepared by metal–organic decomposition (MOD) method. It is found that the evaporation of vanadium during the pyrolysis tends to cause a substantial phase impurity, and the unexpected few tetragonal phase inhibits the charge separation evidently. Consequently, suitably excessive vanadium precursor was adopted to eliminate the phase impurity, based on which the obtained intrinsic BiVO4 photoanode could exhibit photocurrent density of 4.2 mA cm−2 at 1.23 VRHE under AM 1.5 G irradiation, as comparable to the one fabricated by the currently popular two‐step electrodeposition method. Furthermore, the excellent performance can be maintained on the enlarged photoanode (25 cm2), demonstrating the advantage of MOD method in scalable preparation. Our work provides new insight and highlights the glorious future of MOD method for the design of scale‐up efficient BiVO4 photoanode. [ABSTRACT FROM AUTHOR]

Core‐shell photoanodes have shown great potential for photoelectrochemical (PEC) water oxidation. However, the construction of a high‐quality interface between the core and shell, as well as a highly catalytic surface, remains a challenge. Herein, guided by computation, we present a BiVO4 photoanode coated with ZnCoFe polyphthalocyanine using pyrazine as a coordination agent. The bidirectional axial coordination of pyrazine plays a dual role by facilitating intimate interfacial contact between BiVO4 and ZnCoFe polyphthalocyanine, as well as regulating the electron density and spin configuration of metal sites in ZnCoFe phthalocyanine, thereby promoting the potential‐limiting step of *OOH desorption. The resulting photoanode displayed a high photocurrent density of 5.7±0.1 mA cm−2 at 1.23 VRHE. This study introduces a new approach for constructing core–shell photoanodes, and uncovers the key role of pyrazine axial coordination in modulating the catalytic activity of metal phthalocyanine. [ABSTRACT FROM AUTHOR]

Solar water oxidation is a critical step in artificial photosynthesis. Successful completion of the process requires four holes and releases four protons. It depends on the consecutive accumulation of charges at the active site. While recent research has shown an obvious dependence of the reaction kinetics on the hole concentrations on the surface of heterogeneous (photo)electrodes, little is known about how the catalyst density impacts the reaction rate. Using atomically dispersed Ir catalysts on hematite, we report a study on how the interplay between the catalyst density and the surface hole concentration influences the reaction kinetics. At low photon flux, where surface hole concentrations are low, faster charge transfer was observed on photoelectrodes with low catalyst density compared to high catalyst density; at high photon flux and high applied potentials, where surface hole concentrations are moderate or high, slower surface charge recombination was afforded by low‐density catalysts. The results support that charge transfer between the light absorber and the catalyst is reversible; they reveal the unexpected benefits of low‐density catalyst loading in facilitating forward charge transfer for desired chemical reactions. It is implied that for practical solar water splitting devices, a suitable catalyst loading is important for maximized performance. [ABSTRACT FROM AUTHOR]

Photoelectrochemical lithium (Li) extraction can be expected to provide a useful recycle of Li+ from waste Li‐containing battery, but the process is limited by the photocathodes with poor Li+ absorption and low yield rate. Here, we have designed a hierarchical silicon (Si)‐based photocathode with mixed‐phase tungsten oxide (WO3) cocatalysts for photoelectrochemical Li extraction under 1 sun illumination, achieving a high Li yield rate of ≈223.0 μg cm−2 h−1 and an excellent faradaic efficiency of 91.9 % at 0.0817 V versus Li0/+ redox couple. The WO3 cocatalysts with the mixture of amorphous and crystalline phase accelerates the Li+ insertion and precipitation and enriches the concentration of Li+ at the photocathode surface. This robust photoelectrochemical Li extraction system provides a new insight on designing green and efficient route for cyclic utilization of Li resources in the sustainable energy field. [ABSTRACT FROM AUTHOR]

Sluggish oxygen evolution kinetics are one of the key limitations of bismuth vanadate (BiVO4) photoanodes for efficient photoelectrochemical (PEC) water splitting. To address this issue, we report a vanadium oxide (VOx) with enriched oxygen vacancies conformally grown on BiVO4 photoanodes by a simple photo‐assisted electrodeposition process. The optimized BiVO4/VOx photoanode exhibits a photocurrent density of 6.29 mA cm−2 at 1.23 V versus the reversible hydrogen electrode under AM 1.5 G illumination, which is ca. 385 % as high as that of its pristine counterpart. A high charge‐transfer efficiency of 96 % is achieved and stable PEC water splitting is realized, with a photocurrent retention rate of 88.3 % upon 40 h of testing. The excellent PEC performance is attributed to the presence of oxygen vacancies in VOx that forms undercoordinated sites, which strengthen the adsorption of water molecules onto the active sites and promote charge transfer during the oxygen evolution reaction. This work demonstrates the potential of vanadium‐based catalysts for PEC water oxidation. [ABSTRACT FROM AUTHOR]

The sluggish H2O oxidation kinetics on photoanodes severely obstructs the overall solar‐to‐energy efficiency of photoelectrochemical (PEC) cells. Herein, we find a 10 to 55‐fold increase of photocurrent by conducting ammonia oxidation reaction (AOR) on hematite (α‐Fe2O3) photoanodes under near‐neutral pH (9–11) and moderate applied potentials (1.0–1.4 VRHE) compared to H2O oxidation. By rate law analysis and operando spectroscopic studies, we confirm the non‐radical nucleophilic attack of NH3 molecules on high‐valent surface Fe−O species (e.g. FeIV=O) and Fe−N species that produces NOx− and N2, respectively, which overwhelms the nucleophilic attack of H2O on surface FeIV=O and contributes to a high Faradaic efficiency of above 80 % for AOR. This work reveals a novel non‐radical nucleophilic attack strategy, which is significantly different from the conventional indirect radical‐mediated AOR mechanism, for the rational design of high‐performance AOR photoelectrocatalysts. [ABSTRACT FROM AUTHOR]

This work reports an aqueous dye‐sensitized photoelectrochemical cell (DSPEC) capable of oxidizing glycerol (an archetypical biobased compound) coupled with H2 production. We employed a mesoporous TiO2 photoanode sensitized with the high potential thienopyrroledione‐based dye AP11, encased in an acetonitrile‐based redox‐gel that protects the photoanode from degradation by aqueous electrolytes. The use of the gel creates a biphasic system with an interface at the organic (gel) electrode and aqueous anolyte. Embedded in the acetonitrile gel is 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO), acting as both a redox‐mediator and a catalyst for oxidative transformations. Upon oxidation of TEMPO by the photoexcited dye, the in situ generated TEMPO+ shuttles through the gel to the acetonitrile–aqueous interface, where it acts as an oxidant for the selective conversion of glycerol to glyceraldehyde. The introduction of the redox‐gel layer affords a 10‐fold increase in the conversion of glycerol compared to the purely aqueous system. Our redox‐gel protected photoanode yielded a stable photocurrent over 48 hours of continuous operation, demonstrating that this DSPEC is compatible with alkaline aqueous reactions. [ABSTRACT FROM AUTHOR]

Actiniae‐like carbon nitride (ACN) bundles were synthesized by the pyrolysis of an asymmetric supramolecular precursor prepared from L‐arginine (L‐Arg) and melamine. ACN has adjustable band gaps (2.25 eV–2.75 eV) and hollow microtubes with ultrathin pore walls, which enrich reaction sites, improve visible‐light absorption and enhance charge separation. In the presence of phenylcarbinol, ACN exhibited excellent water‐splitting ability (95.3 μmol h−1) and in the meanwhile phenylcarbinol was selectively oxidized to benzaldehyde (conversion of 90.9 %, selectivity of 99.7 %) under solar irradiation. For the concurrent reactions, 2D isotope labeling, separation, and detection were conducted to confirm that the proton source of released hydrogen is water. The mechanism of water splitting and phenylcarbinol oxidation was also investigated. [ABSTRACT FROM AUTHOR]

A host–guest complex self‐assembled through Co2+ and cucurbit[5]uril (Co@CB[5]) is used as a supramolecular catalyst on the surface of metal oxides including porous indium tin oxide (ITO) and porous BiVO4 for efficient electrochemical and photoelectrochemical water oxidation. When immobilized on ITO, Co@CB[5] exhibited a turnover frequency (TOF) of 9.9 s−1 at overpotential η=550 mV in a pH 9.2 borate buffer. Meanwhile, when Co@CB[5] complex was immobilized onto the surface of BiVO4 semiconductor, the assembled Co@CB[5]/BiVO4 photoanode exhibited a low onset potential of 0.15 V (vs. RHE) and a high photocurrent of 4.8 mA cm−2 at 1.23 V (vs. RHE) under 100 mW cm−2 (AM 1.5) light illumination. Kinetic studies confirmed that Co@CB[5] acts as a supramolecular water oxidation catalyst, and can effectively accelerate interfacial charge transfer between BiVO4 and electrolyte. Surface charge recombination of BiVO4 can be also significantly suppressed by Co@CB[5]. [ABSTRACT FROM AUTHOR]

The introduction of oxygen vacancies (Ov) has been regarded as an effective method to enhance the catalytic performance of photoanodes in oxygen evolution reaction (OER). However, their stability under highly oxidizing environment is questionable but was rarely studied. Herein, NiFe‐metal–organic framework (NiFe‐MOFs) was conformally coated on oxygen‐vacancy‐rich BiVO4 (Ov‐BiVO4) as the protective layer and cocatalyst, forming a core–shell structure with caffeic acid as bridging agent. The as‐synthesized Ov‐BiVO4@NiFe‐MOFs exhibits enhanced stability and a remarkable photocurrent density of 5.3±0.15 mA cm−2 at 1.23 V (vs. RHE). The reduced coordination number of Ni(Fe)‐O and elevated valence state of Ni(Fe) in NiFe‐MOFs layer greatly bolster OER, and the shifting of oxygen evolution sites from Ov‐BiVO4 to NiFe‐MOFs promotes Ov stabilization. Ovs can be effectively preserved by the coating of a thin NiFe‐MOFs layer, leading to a photoanode of enhanced photocurrent and stability. [ABSTRACT FROM AUTHOR]

Improving charge transport and reducing bulk/surface recombination can increase the activity and stability of BiVO4 for water oxidation. Herein we demonstrate that the photoelectrochemical (PEC) performance of BiVO4 can be significantly improved by potentiostatic photopolarization. The resulting cocatalyst‐free BiVO4 photoanode exhibited a record‐high photocurrent of 4.60 mA cm−2 at 1.23 VRHE with an outstanding onset potential of 0.23 VRHE in borate buffer without a sacrificial agent under AM 1.5G illumination. The most striking characteristic was a strong "self‐healing" property of the photoanode, with photostability observed over 100 h under intermittent testing. The synergistic effects of the generated oxygen vacancies and the passivated surface states at the semiconductor–electrolyte interface as a result of potentiostatic photopolarization reduced the substantial carrier recombination and enhanced the water oxidation kinetics, further inhibiting photocorrosion. [ABSTRACT FROM AUTHOR]

To activate electronic and optical functions of the redox‐active metal–organic framework, (Me2NH2)[InIII(TTFTB)]⋅0.7 C2H5OH⋅DMF (Me2NH2@1, TTFTB=tetrathiafulvalene‐tetrabenzoate, DMF=N,N‐dimethylformamide), has been exchanged by tetrathiafulvalenium (TTF.+) and N,N′‐dimethyl‐4,4′‐bipyridinium (MV2+). These cations provide electron carriers and photosensitivity. The exchange retains the crystallinity allowing single‐crystal to single‐crystal post‐synthetic transformation to TTF@1 and MV@1. Both TTF.+ and MV2+ enhance the electrical conductivity by a factor of 102 and the visible light induced photocurrent by 4 and 28 times, respectively. EPR evidences synergetic effect involving charge transfer between the framework redox‐active TTFTB bridges and MV2+. The results demonstrate that functionalization of MOF by cation exchange without perturbing the crystallinity extends possibilities to achieve switchable materials. [ABSTRACT FROM AUTHOR]

We study how visible light influences the activity of an electrocatalyst composed of Au and Pt nanoparticles. The bimetallic composition imparts a dual functionality: the Pt component catalyzes the electrochemical oxidation of ammonia to liberate hydrogen and the Au component absorbs visible light by the excitation of localized surface plasmon resonances. Under visible‐light excitation, this catalyst exhibits enhanced electrochemical ammonia oxidation kinetics, outperforming previously reported electrochemical schemes. We trace the enhancement to a photochemical potential resulting from electron–hole carriers generated in the electrocatalyst by plasmonic excitation. The photopotential responsible for enhanced kinetics scales linearly with the light intensity—a general design principle for eliciting superlative photoelectrochemical performance from catalysts comprised of plasmonic metals or hybrids. We also determine a photochemical conversion coefficient. [ABSTRACT FROM AUTHOR]

Significant charge recombination that is difficult to suppress limits the practical applications of hematite (α‐Fe2O3) for photoelectrochemical water splitting. In this study, Ti‐modified hematite mesocrystal superstructures assembled from highly oriented tiny nanoparticle (NP) subunits with sizes of ca. 5 nm were developed to achieve the highest photocurrent density (4.3 mA cm−2 at 1.23 V vs. RHE) ever reported for hematite‐based photoanodes under back illumination. Owing to rich interfacial oxygen vacancies yielding an exceedingly high carrier density of 4.1×1021 cm−3 for super bulk conductivity in the electrode and a large proportion of ultra‐narrow depletion layers (<1 nm) inside the mesoporous film for significantly improved hole collection efficiency, a boosting of multihole water oxidation with very low activation energy (Ea=44 meV) was realized. [ABSTRACT FROM AUTHOR]

Increasing long‐term photostability of BiVO4 photoelectrode is an important issue for solar water splitting. The NiOOH oxygen evolution catalyst (OEC) has fast water oxidation kinetics compared to the FeOOH OEC. However, it generally shows a lower photoresponse and poor stability because of the more substantial interface recombination at the NiOOH/BiVO4 junction. Herein, we utilize a plasma etching approach to reduce both interface/surface recombination at NiOOH/BiVO4 and NiOOH/electrolyte junctions. Further, adding Fe2+ into the borate buffer electrolyte alleviates the active but unstable character of etched‐NiOOH/BiVO4, leading to an outstanding oxygen evolution over 200 h. The improved charge transfer and photostability can be attributed to the active defects and a mixture of NiOOH/NiO/Ni in OEC induced by plasma etching. Metallic Ni acts as the ion source for the in situ generation of the NiFe OEC over long‐term durability. [ABSTRACT FROM AUTHOR]

Herein, we establish a simple synthetic strategy affording a heterogeneous, precious metal‐free, dye‐sensitized photoelectrode for water oxidation, which incorporates a Prussian blue (PB) structure for the sensitization of TiO2 and water oxidation catalysis. Our approach involves the use of a Fe(CN)5 bridging group not only as a cyanide precursor for the formation of a PB‐type structure but also as an electron shuttle between an organic chromophore and the catalytic center. The resulting hetero‐functional PB‐modified TiO2 electrode demonstrates a low‐cost and easy‐to‐construct photoanode, which exhibits favorable electron transfers with a remarkable excited state lifetime on the order of nanoseconds and an extended light absorption capacity of up to 500 nm. Our approach paves the way for a new family of precious metal‐free robust dye‐sensitized photoelectrodes for water oxidation, in which a variety of common organic chromophores can be employed in conjunction with CoFe PB structures. [ABSTRACT FROM AUTHOR]

The BiVO4 photoelectrochemical (PEC) electrode in tandem with a photovoltaic (PV) cell has shown great potential to become a compact and cost‐efficient device for solar hydrogen generation. However, the PEC part is still facing problems such as the poor charge transport efficiency owing to the drag of oxygen vacancy bound polarons. In the present work, to effectively suppress oxygen vacancy formation, a new route has been developed to synthesize BiVO4 photoanodes by using a highly oxidative two‐dimensional (2D) precursor, bismuth oxyiodate (BiOIO3), as an internal oxidant. With the reduced defects, namely the oxygen vacancies, the bound polarons were released, enabling a fast charge transport inside BiVO4 and doubling the performance in tandem devices based on the oxygen vacancy eliminated BiVO4. This work is a new avenue for elaborately designing the precursor and breaking the limitation of charge transport for highly efficient PEC‐PV solar fuel devices. [ABSTRACT FROM AUTHOR]

A photoelectrochemical (PEC) cell can split water into hydrogen and oxygen with the assistance of solar illumination. However, its application is still limited by excessive bulk carrier recombination and sluggish surface oxygen evolution reaction (OER) kinetics. Taking SnS2 as an example, a promising layered optoelectronic semiconductor, Ar plasma treatment strategy was used to introduce a SnS/SnS2 P−N heterojunction and O−S bond near the surface of a SnS2 nanosheet array, simultaneously increasing the separation efficiency of photogenerated electron–hole pairs in the bulk and lowering the OER overpotential at the surface. The onset potential of the plasma‐treated SnS2 nanosheet array shifts negatively to 0.16 V, and the photocurrent density at 1.23 V vs. RHE boosts to 2.15 mA cm−2, which is 7 times that of pristine SnS2. This work demonstrates a facile plasma treatment strategy to modulate the energy band structure and surface chemical states for improved PEC performance. [ABSTRACT FROM AUTHOR]

A simple method to grow a closely packed carbon nitride (CN) film by the crystallization of CN monomers on a conductive substrate followed by a thermal condensation is reported. The as‐synthesized CN exhibits excellent performance as photoanode material in a photoelectrochemical cell. Detailed (photo)electrochemical and transient absorption measurements indicate excellent charge separation properties, high hole‐extraction efficiency (up to 50 %), a long electron lifetime, and low amount of defect states below the CN conduction band. Consequently, the CN photoanode exhibits a markedly low overpotential of 0.25 V versus reversible hydrogen electrode (RHE), which is comparable with the state‐of‐the‐art metal‐based photoanodes, an impressive photocurrent density of 116 μA cm−2 at 1.23 V versus RHE in an alkaline solution without sacrificial agent, as well as excellent stability over a wide pH range (0–13). [ABSTRACT FROM AUTHOR]

Abstract: Hydrogenases (H2ases) are benchmark electrocatalysts for H2 production, both in biology and (photo)catalysis in vitro. We report the tailoring of a p‐type Si photocathode for optimal loading and wiring of H2ase through the introduction of a hierarchical inverse opal (IO) TiO2 interlayer. This proton‐reducing Si|IO‐TiO2|H2ase photocathode is capable of driving overall water splitting in combination with a photoanode. We demonstrate unassisted (bias‐free) water splitting by wiring Si|IO‐TiO2|H2ase to a modified BiVO4 photoanode in a photoelectrochemical (PEC) cell during several hours of irradiation. Connecting the Si|IO‐TiO2|H2ase to a photosystem II (PSII) photoanode provides proof of concept for an engineered Z‐scheme that replaces the non‐complementary, natural light absorber photosystem I with a complementary abiotic silicon photocathode. [ABSTRACT FROM AUTHOR]

Abstract: Hydrogen production through water splitting is considered a promising approach for solar energy harvesting. However, the variable and intermittent nature of solar energy and the co‐production of H2 and O2 significantly reduce the flexibility of this approach, increasing the costs of its use in practical applications. Herein, using the reversible n‐type doping/de‐doping reaction of the solid‐state polytriphenylamine‐based battery electrode, we decouple the H2 and O2 production in acid water electrolysis. In this architecture, the H2 and O2 production occur at different times, which eliminates the issue of gas mixing and adapts to the variable and intermittent nature of solar energy, facilitating the conversion of solar energy to hydrogen (STH). Furthermore, for the first time, we demonstrate a membrane‐free solar water splitting through commercial photovoltaics and the decoupled acid water electrolysis, which potentially paves the way for a new approach for solar water splitting. [ABSTRACT FROM AUTHOR]

Abstract: Research into efficient synthesis, fundamental properties, and potential applications of phosphorene is currently the subject of intense investigation. Herein, solution‐processed phosphorene or few‐layer black phosphorus (FL‐BP) sheets are prepared using a microwave exfoliation method and used in photoelectrochemical cells. Based on experimental and theoretical (DFT) studies, the FL‐BP sheets are found to act as catalytically active sites and show excellent electrocatalytic activity for triiodide reduction in dye‐sensitized solar cells. Importantly, the device fabricated based on the newly designed cobalt sulfide (CoSx) decorated nitrogen and sulfur co‐doped carbon nanotube heteroelectrocatalyst coated with FL‐BP (FL‐BP@N,S‐doped CNTs‐CoSx) displayed an impressive photovoltaic efficiency of 8.31 %, outperforming expensive platinum based cells. This work paves the way for using phosphorene‐based electrocatalysts for next‐generation energy‐storage systems. [ABSTRACT FROM AUTHOR]

Abstract: A bio‐photoelectrochemical cell (BPEC) based on a fuel‐free self‐circulation water–oxygen–water system was fabricated. It consists of Ni:FeOOH modified n‐type bismuth vanadate (BiVO4) photoanode and laccase catalyzed biocathode. In this BPEC, irradiation of the photoanode generates photocurrent for photo‐oxidation of water to oxygen, which is reduced to water again at the laccase biocathode. Of note, the by‐products of two electrode reactions could continue to be reacted, which means the H2O and O2 molecules are retained in an infinite loop of water–oxygen–water without any sacrificial chemical components. As a result, the assembled fuel‐free BPEC exhibits good performance with an open‐circuit potential of 0.97 V and a maximum power density of 205 μW cm−2 at 0.44 V. This BPEC based on a self‐circulation system offers a fuel‐free model to enhance multiple energy conversion and application in reality. [ABSTRACT FROM AUTHOR]

Syngas, the mixture of CO and H2, is a key feedstock to produce methanol and liquid fuels in industry, yet limited success has been made to develop clean syngas production using renewable solar energy. We demonstrated that syngas with a benchmark turnover number of 1330 and a desirable CO/H2 ratio of 1:2 could be attained from photoelectrochemical CO2 and H2O reduction in an aqueous medium by exploiting the synergistic co-catalytic effect between Cu and ZnO. The CO/H2 ratio in the syngas products was tuned in a large range between 2:1 and 1:4 with a total unity Faradaic efficiency. Moreover, a high Faradaic efficiency of 70 % for CO was acheived at underpotential of 180 mV, which is the lowest potential ever reported in an aqueous photoelectrochemical cell. It was found that the combination of Cu and ZnO offered complementary chemical properties that lead to special reaction channels not seen in Cu, or ZnO alone. [ABSTRACT FROM AUTHOR]

Building on regenerative photoelectrochemical solar cells and emerging electrochemical redox flow batteries (RFBs), more efficient, scalable, compact, and cost-effective hybrid energy conversion and storage devices could be realized. An integrated photoelectrochemical solar energy conversion and electrochemical storage device is developed by integrating regenerative silicon solar cells and 9,10-anthraquinone-2,7-disulfonic acid (AQDS)/1,2-benzoquinone-3,5-disulfonic acid (BQDS) RFBs. The device can be directly charged by solar light without external bias, and discharged like normal RFBs with an energy storage density of 1.15 Wh L−1 and a solar-to-output electricity efficiency (SOEE) of 1.7 % over many cycles. The concept exploits a previously undeveloped design connecting two major energy technologies and promises a general approach for storing solar energy electrochemically with high theoretical storage capacity and efficiency. [ABSTRACT FROM AUTHOR]

Integrating natural and artificial photosynthetic platforms is an important approach to developing solar-driven hybrid systems with exceptional function over the individual components. A natural-artificial photosynthetic hybrid platform is formed by wiring photosystem II (PSII) and a platinum-decorated silicon photoelectrochemical (PEC) cell in a tandem manner based on a photocatalytic-PEC Z-scheme design. Although the individual components cannot achieve overall water splitting, the hybrid platform demonstrated the capability of unassisted solar-driven overall water splitting. Moreover, H2 and O2 evolution can be separated in this system, which is ascribed to the functionality afforded by the unconventional Z-scheme design. Furthermore, the tandem configuration and the spatial separation between PSII and artificial components provide more opportunities to develop efficient natural-artificial hybrid photosynthesis systems. [ABSTRACT FROM AUTHOR]

Solar water splitting in acidic solutions has important technological implications, but has not been demonstrated to date in a dual absorber photoelectrochemical cell. The lack of functionally stable water-oxidation catalysts (WOCs) in acids is a key reason for this slow development. The only WOCs that are stable at low pH are Ir-based systems, which are typically too expensive to be implemented broadly. It is now shown that this deficiency may be corrected by applying an ultra-thin monolayer of a molecular Ir WOC to hematite for solar water splitting in acidic solutions. The turn-on voltage is observed to shift cathodically by 250 mV upon the application of a monolayer of the molecular Ir WOC. When the molecular WOC is replaced by a heterogeneous multilayer derivative, stable solar water splitting for over 5 h is achieved with near-unity Faradaic efficiency. [ABSTRACT FROM AUTHOR]

A photoelectrochemical (PEC) cell consisting of an n-type CdS single-crystal electrode and a Pt counter electrode with the ruthenium-2,2′-bipyridine complex [Ru(bpy)3]2+/3+ as the redox shuttle in a non-aqueous electrolyte was studied to obtain a higher open-circuit voltage ( VOC) than the onset voltage for water splitting. A VOC of 1.48 V and a short-circuit current ( ISC) of 3.88 mA cm−2 were obtained under irradiation by a 300 W Xe lamp with 420-800 nm visible light. This relatively high voltage was presumably due to the difference between the Fermi level of photo-irradiated n-type CdS and the redox potential of the Ru complex at the Pt electrode. The smooth redox reaction of the Ru complex with one-electron transfer was thought to have contributed to the high VOC and ISC. The obtained VOC was more than the onset voltage of water electrolysis for hydrogen and oxygen generation, suggesting prospects for application in water electrolysis. [ABSTRACT FROM AUTHOR]

Reported is the design and modular synthesis of a dual metal-dual semiconductor heterostructure with control over the dimensions and placement of its individual components. Analogous to molecular synthesis, colloidal synthesis is now evolving into a series of sequential synthetic procedures with separately optimized steps. We detail the challenges and parameters that must be considered when assembling such a multicomponent nanoparticle, and their solutions. This multicomponent nanosystem, Ru-CdSe@CdS-Pt, was designed to achieve charge carrier separation and directional transfer across different interfaces toward two separate redox catalysts. This heterostructure may potentially serve as a nanometric closed circuit photoelectrochemical cell. [ABSTRACT FROM AUTHOR]

The high overpotential in water oxidation on anodes is a limiting factor for the large-scale application of photoelectrochemical cells. To overcome this limitation, it is essential to understand the four proton-coupled electron transfer (PCET) steps in the reaction mechanism and their implications to the overpotential. Herein, a simple scheme to compute the energies of the PCET steps in water oxidation on the aqueous TiO2 surface using a hybrid density functional is described. An energy level diagram for fully decoupled electron- and proton-transfer reactions in which both electronic and protonic levels are placed on the same potential scale is also described. The level diagram helps to visualize the electronic and protonic components of the overpotential, and points out what are needed to improve. For TiO2, it is found that its catalytic activity is due to aligning the protonic energy levels in the PCET steps, while improving the activity requires also aligning the electronic levels. [ABSTRACT FROM AUTHOR]

The high overpotential in water oxidation on anodes is a limiting factor for the large-scale application of photoelectrochemical cells. To overcome this limitation, it is essential to understand the four proton-coupled electron transfer (PCET) steps in the reaction mechanism and their implications to the overpotential. Herein, a simple scheme to compute the energies of the PCET steps in water oxidation on the aqueous TiO2 surface using a hybrid density functional is described. An energy level diagram for fully decoupled electron- and proton-transfer reactions in which both electronic and protonic levels are placed on the same potential scale is also described. The level diagram helps to visualize the electronic and protonic components of the overpotential, and points out what are needed to improve. For TiO2, it is found that its catalytic activity is due to aligning the protonic energy levels in the PCET steps, while improving the activity requires also aligning the electronic levels. [ABSTRACT FROM AUTHOR]

Multidimensional nano-heterostructures (NHSs) that have unique dimensionality-dependent integrative and synergic effects are intriguing but still underdeveloped. Here, we report the first helical 1D/2D epitaxial NHS between CdS and ZnIn2S4. Experimental and theoretical studies reveal that the mismatches in lattice and dangling bonds between 1D and 2D units govern the growth procedure. The resulting well-defined interface induces the delocalized interface states, thus facilitate the charge transfer and enhance the performance in the photoelectrochemical cells. We foresee that the mechanistic insights gained and the electronic structures revealed would inspire the design of more complex 1D/2D NHSs with outstanding functionalities. [ABSTRACT FROM AUTHOR]

Kleine Mesoporen sind effizienter: Ein mesoporöser Oxidhalbleiter (Wolfram(VI) ‐ oxid) wurde bei 550 °C unter Verwendung eines einfachen einstufigen Verfahrens kristallisiert. Das hochkristalline mesoporöse WO3 hat eine extrem große Oberfläche, die zu einer gesteigerten photoelektrochemische Aktivität bei der Wasseroxidation (siehe Bild) im Vergleich zu einem WO3 ‐ Material mit Mesoporen zwischen den Partikeln führt. [ABSTRACT FROM AUTHOR]

Photokatalyse. In ihrer Zuschrift auf S. 8986 ff. berichten J. Gong et al. über die bevorzugte Reduktion von CO2 zu Brennstoffen an einer Cu2O ‐ Dunkelkathode in wässriger Lösung. Die Wasserstoffentwicklung wird dabei unterdrückt. [ABSTRACT FROM AUTHOR]