Search

Solid electrolyte interphase (SEI) formation and H2O activity reduction in Water‐in‐Salt electrolytes (WiSE) with an enlarged stability window of 3.0 V have provided the feasibility of the high‐energy‐density aqueous Li‐ion batteries. Here, we extend the cathodic potential of WiSE by rationally controlling intermolecular interaction and interphase chemistry with the introduction of trimethyl phosphate (TMP) into WiSE. The TMP not merely limits the H2O activity via the strong interaction between TMP and H2O but also contributes to the formation of reinforced SEI involving phosphate and LiF by manipulating the Li+ solvation structure. Thus, water‐tolerance LiMn2O4 (LMO)||Li4Ti5O12 (LTO) full cell with a P/N ratio of 1.14 can be assembled and achieve a long cycling life of 1000 times with high coulombic efficiency of >99.9 %. This work provides a promising insight into the cost‐effective practical manufacture of LMO||LTO cells without rigorous moisture‐free requirements. [ABSTRACT FROM AUTHOR]

The capacity of transition metal oxide cathode for Li‐ion batteries can be further enhanced by increasing the charging potential. However, these high voltage cathodes suffer from fast capacity decay because the large volume change of cathode breaks the active materials and cathode‐electrolyte interphase (CEI), resulting in electrolyte penetration into broken active materials and continuous side reactions between cathode and electrolytes. Herein, a robust LiF‐rich CEI was formed by potentiostatic reduction of fluorinated electrolyte at a low potential of 1.7 V. By taking LiCoO2 as a model cathode, we demonstrate that the LiF‐rich CEI maintains the structural integrity and suppresses electrolyte penetration at a high cut‐off potential of 4.6 V. The LiCoO2 with LiF‐rich CEI exhibited a capacity of 198 mAh g−1 at 0.5C and an enhanced capacity retention of 63.5 % over 400 cycles as compared to the LiF‐free LiCoO2 with only 17.4 % of capacity retention. [ABSTRACT FROM AUTHOR]

Water‐in‐salt (WIS) electrolytes using super‐concentrated organic lithium (Li) salts are of interest for aqueous Li‐ion batteries. However, the high salt cost, high viscosity, poor wettability, and environmental hazards remain a great challenge. Herein, we present a localized water‐in‐salt (LWIS) electrolyte based on low‐cost lithium nitrate (LiNO3) salt and 1,5‐pentanediol (PD) as inert diluent. The addition of PD maintains the solvation structure of the WIS electrolyte, improves the electrolyte stability via hydrogen‐bonding interactions with water and NO3− molecules, and reduces the total salt concentration. By in situ gelling the LWIS electrolyte with tetraethylene glycol diacrylate (TEGDA) monomer, the electrolyte stability window can be further expanded to 3.0 V. The as‐developed Mo6S8|LWIS gel electrolyte|LiMn2O4 (LMO) batteries delivered outstanding cycling performance with an average Coulombic efficiency of 98.53 % after 250 cycles at 1 C. [ABSTRACT FROM AUTHOR]

Abstract: Organic electrode materials are promising for green and sustainable lithium‐ion batteries. However, the high solubility of organic materials in the liquid electrolyte results in the shuttle reaction and fast capacity decay. Herein, azo compounds are firstly applied in all‐solid‐state lithium batteries (ASSLB) to suppress the dissolution challenge. Due to the high compatibility of azobenzene (AB) based compounds to Li3PS4 (LPS) solid electrolyte, the LPS solid electrolyte is used to prevent the dissolution and shuttle reaction of AB. To maintain the low interface resistance during the large volume change upon cycling, a carboxylate group is added into AB to provide 4‐(phenylazo) benzoic acid lithium salt (PBALS), which could bond with LPS solid electrolyte via the ionic bonding between oxygen in PBALS and lithium ion in LPS. The ionic bonding between the active material and solid electrolyte stabilizes the contact interface and enables the stable cycle life of PBALS in ASSLB. [ABSTRACT FROM AUTHOR]

Abstract: Sustainable sodium‐ion batteries (SSIBs) using renewable organic electrodes are promising alternatives to lithium‐ion batteries for the large‐scale renewable energy storage. However, the lack of high‐performance anode material impedes the development of SSIBs. Herein, we report a new type of organic anode material based on azo group for SSIBs. Azobenzene‐4,4′‐dicarboxylic acid sodium salt is used as a model to investigate the electrochemical behaviors and reaction mechanism of azo compound. It exhibits a reversible capacity of 170 mAh g−1 at 0.2C. When current density is increased to 20C, the reversible capacities of 98 mAh g−1 can be retained for 2000 cycles, demonstrating excellent cycling stability and high rate capability. The detailed characterizations reveal that azo group acts as an electrochemical active site to reversibly bond with Na+. The reversible redox chemistry between azo compound and Na ions offer opportunities for developing long‐cycle‐life and high‐rate SSIBs. [ABSTRACT FROM AUTHOR]