Search

The flow rate dependencies of the aperiodic direct current (dc) and fundamental to eighth alternating current (ac) harmonic components derived from large-amplitude Fourier transformed ac (FT-ac) voltammetry have been evaluated in a microfluidic flow cell containing a 25 μm gold microband electrode. For the oxidation of ferrocenemethanol ([FcMeOH]/[FcMeOH](+) process) in aqueous 0.1 M KNO(3) electrolyte, standard "Levich-like" dc behavior is observed for the aperiodic dc component, which enables the diffusion coefficient for FcMeOH to be obtained. In experimental studies, the first and second ac harmonic components contain contributions from the double layer capacitance current, thereby allowing details of the non-Faradaic current to be established. In contrast, the higher order harmonics and dc aperiodic component are essentially devoid of double layer capacitance contributions allowing the faradaic current dependence on flow rate to be studied. Significantly, flow rate independent data conforming to linear diffusion controlled theory are found in the sixth and higher ac harmonics at a frequency of 15 Hz and for all ac harmonics at a frequency of ≥ 90 Hz. Analysis of FT-ac voltammograms by theory based on stationary microband or planar electrode configurations confirms that stationary microband and planar electrode configurations and experimental data all converge for the higher order harmonics and establishes that the electrode kinetics are very fast (≥1 cms(-1)). The ability to locate, from a single experiment, a dc Faradaic component displaying Levich behavior, fundamental and second harmonics that contain details of the double layer capacitance, and Faradaic ac higher order harmonic currents that are devoid of capacitance, independent of the volume flow rate and also conform closely to mass transport by planar diffusion, provides enhanced flexibility in mass transport and electrode kinetic analysis and in understanding the performance of hydrodynamic electrochemical cells and reactors.

Magnetic resonance imaging (MRI) is a noninvasive technique that can be used to visualize mixing processes in optically opaque systems in up to three dimensions. Here, MRI has been used for the first time to obtain both cross-sectional velocity and concentration maps of flow through an optically opaque Y-shaped microfluidic sensor. Images of 23 micromx23 microm resolution were obtained for a channel of rectangular cross section (250 micromx500 microm) fed by two square inlets (250 micromx250 microm). Both miscible and immiscible liquid systems have been studied. These include a system in which the coupling of flow and mass transfer has been observed, as the diffusion of the analyte perturbs local hydrodynamics. MRI has been shown to be a versatile tool for the study of mixing processes in a microfluidic system via the multidimensional spatial resolution of flow and mass transfer.

A novel microfluidic approach for the quantification of reaction kinetics is presented. A three-dimensional finite difference numerical simulation was developed in order to extract quantitative kinetic information from fluorescence lifetime imaging experimental data. This approach was first utilized for the study of a fluorescence quenching reaction within a microchannel; the lifetime of a fluorophore was used to map the diffusion of a quencher across the microchannel. The approach was then applied to a more complex chemical reaction between a fluorescent amine and an acid chloride, via numerical simulation the bimolecular rate constant for this reaction was obtained.

A hydrodynamic system based on the channel flow cell for voltammetric detection of ions at the liquid/liquid interface is reported. The current response for tetraethylammonium ion transfer across a membrane-supported liquid/liquid interface is shown to be consistent with existing theory for both the flow rate and voltage scan rate dependence of such processes, with no calibration factors or other adjustable parameters required. The analytical utility of such a device is discussed with specific regard to in situ measurements in flow systems.