Search

Novichok A-series compounds, novel nerve agents, pose an increasing threat to citizens worldwide; however, no analytical methods have been reported for detecting their hydrolysis products. Herein, a screening method was developed to detect and identify Novichok A-series degradation products (hydrolysates of A230, A232, A234, A262, and one related compound) and alkyl methylphosphonic acids (RMPAs, conventional nerve agent hydrolysates) using liquid chromatography-tandem mass spectrometry (LC-MS/MS). We identified a suitable derivatization reagent, 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride (DMTMM), and optimized the reaction conditions. The derivatized esters of Novichok A-series degradation products were stable and easily detected. We used this derivatization to achieve the first analytical method for Novichok hydrolysis products in urine (0.40-4.0 ng/mL). The detection limits of the RMPAs (0.1-0.4 ng/mL) were comparable to those presented in previous reports involving pentafluorobenzylation or direct LC-MS/MS. The applicability of the newly developed method was evaluated by analyzing urine samples from the OPCW Fifth Biomedical Proficiency Test.

Fluorescent polarization immunoassay (FPIA) is a single-step immunoassay method that is applicable to point-of-care testing; however, its applicability to large biomolecules has been restricted because ordinary FPIA is a competitive assay. Here, we report a noncompetitive FPIA using the variable domain from the heavy chain of a camelid antibody (VHH antibody). FPIA with VHH was successfully used to quantitate rabbit immunoglobulin G (IgG) and demonstrated a wider response range than that observed with antibody-binding (Fab) fragment. Then, using a portable FPIA instrument, a VHH-based immunoassay of human IgG in a human serum certified reference material was demonstrated.

Conformational transitions from secondary (e.g., B- to A-form DNA) to higher-order (e.g., coil to globule) transitions play important roles in genome expression and maintenance. Several single-molecule approaches using microfluidic devices have been used to determine the kinetics of DNA chromatin assembly because microfluidic devices can afford stretched DNA molecules through laminar flow and rapid solution exchange. However, some issues, particularly the uncertainty of time 0 in the solution exchange process, are encountered. In such kinetic experiments, it is critical to determine when the target solution front approaches the target DNA molecules. Therefore, a new design for a microfluidic device is developed that enables the instantaneous exchange of solutions in the observation channel, allowing accurate measurements of DNA conformational transitions; stepwise, ethanol-induced conformational transitions are revealed. Although full DNA contraction from coil to globule is observed with >50% ethanol, no outstanding change is observed at concentrations <40% in 10 min. With 50% ethanol solution, the DNA conformational transition passes through two steps: (i) fast and constant-velocity contraction and (ii) relatively slow contraction from the free end. The first process is attributed to the B to A conformational transition by gradual dehydration. The second process is due to the coil-globule transition as the free end of DNA starts the contraction. This globular structure formation counteracts the shear force from the microfluids and decelerates the contraction velocity. This real-time observation system can be applied to the kinetic analysis of DNA conformational transitions such as kinetics of chromatin assembly and gene expression.

The detection system which enables simultaneous fluorescence polarization (FP) measurement of multiple samples was proposed and proven by a proof-of-concept experiment on the viscosity dependence of FP of fluorescein sample in water-ethylene glycol solution and another experiment on the FP immunoassay of prostaglandin E2 sample. The measurement principle of FP is based on the synchronization between the orientation of the liquid crystal molecules and the sampling frequency of a CCD. This report is the first description of the simultaneous FP measurement of multiple samples. This system has a great potential for equipment miniaturization and price reduction as well as providing simultaneous FP measurement of multiple samples.

We demonstrate a seamless and contactless method from protein crystallization to X-ray analysis using a microfluidic chip with the aim of obtaining a complete crystallographic data set of a protein crystal under cryogenic conditions. Our microfluidics-based approach did not require direct manipulation of the protein crystal. Therefore, the microfluidic chip approach is suitable for novices of X-ray analysis of protein crystals. We also investigated the effect of stepwise cryoprotection on the quality of protein crystals. Protein crystals with cryoprotection via on-chip manipulation did not show deterioration of crystallographic quality of the protein crystal. The complete diffraction data set of a protein crystal, which is required for determining the 3D structure of the target protein, is obtainable by a simple manipulation.

We demonstrated DNA droplets could be injected with an inkjet injector for microchannel array electrophoresis and attained high throughput analysis of biomolecules. This injection method greatly reduced both analysis time and sample amount, compared with a conventional microchip electrophoresis method, and allowed high parallelization of a microchannel array on a small substrate. Since we do not need to use complicated electric programs or microchannel design, our injection method should facilitate omics analyses and contribute to high performance clinical assays.

Adipose tissue-derived stem cells (ASCs) have shown promise in cell therapy because of their ability to self-renew damaged or diseased organs and easy harvest. To ensure the distribution and quantification of the ASCs injected from tail vein, several whole-body imaging techniques including fluorescence optical imaging with quantum dots (QDs) have been employed, but they may suffer from insufficient sensitivity and accuracy. Here, we report quantitative distribution of ASCs in various organs (heart, lung, liver, spleen, and kidney) of mice, which were intravenously injected with QDs-labeled ASCs (QDs-ASCs), through the detection of QDs-derived metallic components by inductively coupled plasma mass spectrometry (ICPMS). For accurate and precise determination, each organ was harvested and completely digested with a mixture of HNO(3) and H(2)O(2) in a microwave oven prior to ICPMS measurement, which was equipped with a microflow injection system and a laboratory-made capillary-attached micronebulizer. After optimization, 16 elements including major components (Cd, Se, and Te) of QDs and essential elements (Na, K, Mg, Ca, P, S, Mn, Fe, Co, Cu, Zn, Se, Sr, and Mo) were successfully determined in the organs. As compared to untreated mice, QDs-ASCs-treated mice showed significantly higher levels of Cd and Te in all organs, and as expected, the molar ratio of Cd to Te in each organ was in good agreement with the molar composition ratio in the QDs. This result indicates that the increment of Cd (or Te) can be used as a tracer for calculating the distribution of ASCs in mice organs. As a result of the calculation, 36.8%, 19.1%, 0.59%, 0.49%, and 0.25% of the total ASCs injected were estimated to be distributed in the liver, lung, heart, spleen, and kidney, respectively.

A nanowall array structure was fabricated on a quartz chip as a separation matrix of DNA fragments, and a 30 s separation was realized for a mixture of DNA fragments (48.5 and 1 kbp fragments) by applying the electric voltage. A longer DNA fragment migrates faster than a shorter one in a nanowall array chip, and it is completely different from the separation of DNA based on gel electrophoresis, nanopillar chips, and nanoparticle array chips. Although the result is similar to DNA separation by entropic trapping, it could not be fully explained by entropic trapping phenomena. Direct observation of single-DNA molecular dynamics inside a nanowall array structure indicates that both confined elongation and relaxation recoiling of a DNA molecule occur, and an elongated DNA molecule migrates faster than a recoiled DNA molecule. Numerical fitting of DNA molecular dynamics reveals that the balance between times for the transverse of a DNA molecule in the nanowall array chip and the relaxation-recoiling of a DNA molecule governs the separation of DNA.

A solid-state molecular beacon using a gold support as a fluorescence quencher is combined with a polydimethylsiloxane (PDMS) microfluidic channel to construct an optical sensor for detecting single-stranded DNA binding protein (SSBP) and histone protein. The single-stranded DNA-Cy3 probe or double-stranded DNA-Cy3 probe immobilized on the gold surface is prepared for the detection of SSBP or histone, respectively. Due to the different quenching ability of gold to the immobilized single-stranded DNA-Cy3 probe and the immobilized double-stranded DNA-Cy3 probe, low fluorescence intensity of the attached single-stranded DNA-Cy3 is obtained in SSBP detection, whereas high fluorescence intensity of the attached double-stranded DNA-Cy3 is obtained in histone detection. The amounts of SSBP in sample solutions are determined from the degree of fluorescence recovery of the immobilized single-stranded DNA-Cy3 probe, whereas that of histone in sample solutions is determined from the degree of fluorescence quenching of the immobilized double-stranded DNA-Cy3 probe. Using this approach, label-free detection of target proteins at nanomolar concentrations is achieved in a convenient, general, continuous flow format. Our approach has high potential for the highly sensitive label-free detection of various proteins based on binding-induced conformation changes of immobilized DNA probes.

In about a 3 min period, we have simultaneously separated plasma from human whole blood and metered and diluted the plasma using a microchip with an interchannel microstructure. The plasma separation was based on both cross-flow filtration and sedimentation of red blood cells in the microchannels. Metering and diluting operations of the plasma were based on volume control of liquid in the microchannels by syringe pumps. On this microchip, we produced plasma diluted by a factor of 6 from whole blood containing theophylline and we observed very little hemolysis. It is possible to separate plasma from one or just several drops of whole blood by using this microchip.

Separation techniques, such as chromatography and electrophoresis, form the basis in many fields and are continually developed for better separation efficiency. The efforts normally involve a new mechanism together with sufficient separation length. We develop a velocity gap theory to make things simple. The theory is based on the discovery that the velocity gap (VG) effect could enlarge the distance between two moving objects. Mathematical deduction certified that the resolution may be magnified infinitely without changing the separation mechanism or the separation length. DNA separation confirmed its practical feasibility by achieving 2-5 times higher resolution on a microchip. Our results indicate that VG effect could enlarge the distance between two moving objects and may potentially be utilized to ameliorate separation efficiency.

We have developed an integrated platform for rolling circle amplification (RCA) and circle-to-circle amplification (C2CA) of circular probe (padlock probe) and subsequent microchip electrophoretic detection of a specific gene on a poly(methyl methacrylate) microchip. RCA and C2CA were successfully carried out at a steady temperature of 37 degrees C in the sample well of the microchip, and their respective product was detected on the same channel of the microchip, which was prefilled with a polymer separation matrix and fluorescent dye. Using a species-specific padlock probe for bacterial pathogen V. cholerae, a 25-ng bacterial genomic DNA could be detected in less than 65 min (including RCA and microchip electrophoresis) by this platform. Stable dsDNA C2CA product of genomic DNA for V. cholerae can be detected with the introduced integrated platform. Furthermore, the usefulness of this technique for the monitoring of RCA was demonstrated. This integrated platform provides a sensitive, fast, high-throughput, and reproducible method for signal amplification and detection of the padlock probes in the same microchip and is a promising tool for highly specific gene detection strategies.

We report a dynamic cross-linking effect of Mg2+ that enhances the sieving properties of low-viscosity poly(vinylpyrrolidone) (PVP) solutions. A low-viscosity PVP solution was applied to nondenaturing microchip electrophoresis of protein samples using microchips made of poly(methyl methacrylate). The separation resolution of nondenatured protein markers in 1.8% PVP solution was improved by adding 1-20 mM MgCl2. We studied the effect of the ratio of cross-linking agent on mobility of protein samples and showed that protein retardation (ln micro/micro0) is correlated with the ratio of cross-linking agent to PVP ([cMg2+/cPVP]) as ln micro/micro0=A'[cMg2+/cPVP]b'. A' was related to the protein radius (R), and b' was found to be 0.72 for proteins with R=2.4 nm and 0.82 for proteins with R=1.85 nm. A structural study of PVP in semidilute solutions using dynamic light scattering showed that incremental increases of Mg2+ ion concentration from 5 to 20 mM in 1.8% PVP solution increased the hydrodynamic radius of PVP polymers by 20%.

Online preconcentration of human serum albumin (HSA) and its immunocomplex with a monoclonal antibody by on-chip transient isotachophoresis is reported. An 800-fold signal enhancement was achieved following the preconcentration on standard cross-channel microchips made of poly (methyl methacrylate). Sample injection, preconcentration, and separation were done continuously and controlled solely by a sequential voltage switching program. The preconcentration was followed by on-chip nondenaturing gel electrophoresis in methylcellulose solution. The method was applied to microchip electrophoresis immunoassay of HSA. Baseline separation of HSA and its immunocomplex was achieved in 25 s in the first 1 cm of the microchannel. In a direct immunoassay, the minimum detectable concentration of fluorescent labeled HSA by laser-induced fluorescence detection was 7.5 pM.

A novel chiral detector, a circular-dichroism thermal lens microscope (CD-TLM), was developed to realize sensitive and selective detection of small volume chiral samples on a microchip. To realize chiral recognition on TLM, an excitation beam was phase-modulated at a frequency of 1.2 kHz, and left-circularly polarized light (LCPL) and right-circularly polarized light (RCPL) were generated. Then, the differential light absorption between LCPL and RCPL, which is the CD effect, was detected as thermal lens signal intensity and phase. As a standard sample, optically active tris(ethylenediamine)cobalt(III) [Co-(en)3]3+I3- aqueous solutions were used for performance evaluations. First, we verified the basic principle for selective chiral analysis by comparing the signals in intensity-modulation and phase-modulation modes of the excitation beam. Also, we found that the g-factor, which is significant for determining enantiomeric excess, agreed well with the value obtained by the CD spectrometer. The limit of detection (LOD) for enantiopure [Co-(en)3]3+I3- was 6.3 x 10(-5) M (1.9 x 10(-7) abs) for (-)-Co(en)3(3+), and the sensitivity in absorbance units was more than 250 times higher than that in a CD spectrophotometer. Finally, we demonstrated enantiomeric excess determination on a microchip. The LOD was 1.7% (8.5 x 10(-7) abs) for (-)-Co(en)3(3+) and at least one order superior to the LOD of a CD spectrometer. The applicability of CD-TLM for sensitive chiral analysis on a microchip was verified, and CD-TLM is expected to be promising for microchip-based chiral synthesis and analysis systems.

An ultrasensitive and nonlabeled detection method of nonfluorescent molecules on a microchip was developed by realizing a thermal lens microscope (TLM) with a 266-nm UV pulsed laser as an excitation light source (UV-TLM). Pulsed laser sources have advantages over continuous-wave laser sources in more compact size and better wavelength tuning, which are important for microchip-based analytical systems. Their disadvantage is difficulty in applying a lock-in amplifier due to the high (>10(4)) duty ratio of pulse oscillation. To overcome this problem, we realized a quasi-continuous-wave excitation by modulating the pulse trains at approximately 1 kHz and detecting the synchronous signal with a lock-in amplifier. The optimum pulse repetition frequency was obtained at 80 kHz, which was reasonable considering thermal equilibrium time. Furthermore, a permissible flow velocity in the range of 6.6-19.8 mm/s was found to avoid sensitivity decrease due to photochemical reactions and thermal energy dissipation. Under these conditions, we detected adenine aqueous solutions on a fused-silica microchip without labeling and obtained a sensitivity that was 350 times higher than that in a spectrophotometric method. The sensitivity was enough for detection on a microchip with an optical path length that was 2-3 orders shorter than that in conventional cuvettes. Finally, the UV-TLM method was applied to liquid chromatography detection. Fluorene and pyrene were separated in a microcolumn and detected in a capillary (50-microm inner diameter) with 150 times higher sensitivity than a spectrophotometric method. Our method provides highly sensitive and widely applicable detections for various analytical procedures and chemical syntheses on microchips.

We developed a novel bioassay system using a glass microchip and cultured cells. A microchamber for cell culture and microchannels for reactions and detection were fabricated on a Pyrex glass substrate by photolithography and wet etching techniques. Cell culture, chemical and enzymatic reactions, and detection were integrated into the microchip. To keep different temperatures locally in three areas of the microchip, we designed and fabricated a temperature control device. Nitric oxide released from macrophage-like cells stimulated by lipopolysaccharide was successfully monitored with the microchip, the temperature control device, and a thermal lens microscope. The total assay time was reduced from 24 to 4 h, and detection limit of NO was improved from 1 x 10(-6) to 7 x 10(-8) M compared with conventional methods. Moreover, the system could monitor a time course of the release, which is difficult to measure by conventional batch methods. We conclude that this system is promising for a rapid bioassay system with very small consumption of cells.

A capillarity restricted modification method for microchannel surfaces was developed for gas--liquid microchemical operations in microchips. In this method, a microstructure combining shallow and deep microchannels and the principle of capillarity were utilized for chemical modification of a restricted area of a microchannel. A hydrophobic--hydrophilic patterning in microchannels was prepared as an example for guiding gas and liquid flows along the respective microchannels. Validity of the patterning was confirmed by measuring aqueous flow leak pressure from the hydrophilic microchannel to the hydrophobic one. The leak pressure of 7.7-1.1 kPa agreed well with that predicted theoretically from the Young-Laplace equation for the microchannel depth of 8.6-39 microm. In an experiment to demonstrate usefulness and effectiveness of the method, an air bubble was first introduced into the hydrophilic microchannel and purged from the hydrophobic-hydrophilic patterned microchannels. Next, the patterning structure was applied to remove dissolved oxygen by contacting the aqueous flow with a nitrogen flow. The concentration of dissolved oxygen decreased with contact time, and its time course agreed well with numerical simulation. These demonstrations showed that the proposed patterning method can be used in general microfluidic gas-liquid operations.

This paper describes two types of miniaturized thermal lens optical systems that use optical fibers, SELFOC microlenses and light sources. The first system consists of a compact diode pumped solid-state laser (532 nm) as an excitation light source, a laser diode (635 nm) as a probe light source, an acoustoptic modulator as an excitation light modulator, fiber-based and conventional optics, and a detection system that combines a pinhole, an interference filter, and a photodiode. The second system consists of two laser diodes as the excitation (658 nm) and probe (780 nm) light sources, fiber-based optics, and the same detection system as the first one. The performance of the two systems was evaluated by the limit of detection (LOD) using standard solutions of sunset yellow (SY) and nickel(II) phthalocyaninetetrasulfonic acid tetrasodium salt (NiP). The LODs of the first system for SY and second system for NiP were calculated to be 3.7 x 10(-8) (1.7 x 10(-6) AU) and 7.7 x 10(-9) M (3.4 x10(-6) AU), respectively. These results were consistent with the expected values obtained from photothermal parameters.

Here we report a design and synthesis of a chemically functional polymer membrane by an interfacial polycondensation reaction and multilayer flow inside a microchannel. Single and parallel dual-membrane structures are successfully prepared by using organic/aqueous two-layer flow and organic/aqueous/organic three-layer flow inside the microchannel followed by an interfacial polycondensation reaction. By using the inner-channel membrane, permeation of ammonia species through the inner-channel membrane is successfully achieved. Furthermore, horseradish peroxidase is immobilized on one side of the membrane surface to integrate the chemical transform function onto the inner-channel membrane. Here substrate permeation through the membrane and subsequent chemical transformation at the membrane surface are realized. The polymer membrane prepared inside the microchannel has an important role in ensuring stable contact of different phases such as gas/liquid or liquid/ liquid and the permeation of chemical species through the membrane. Furthermore, membrane surface modification chemistry allows chemical transformation of permeated chemical species. These methods are expected to lead to development of complicated and sophisticated chemical systems involving membrane permeation and chemical reactions.

We have fabricated nanometer-sized channels, demonstrated a technique for the introduction of liquid into the channels, and carried out time-resolved fluorescence measurements of aqueous solutions. In this study, 330-nm- and 850-nm-sized channels were fabricated on fused-silica substrates by fast atom beam etching and hydrofluoric acid bonding methods. A liquid introduction method utilizing capillary action was demonstrated. The liquid introduction was observed under an optical microscope, and the liquid velocity during the introduction was analyzed by surface energy and macroscale hydrodynamics. The liquid velocity due to capillary action in the nanometer-sized channel seemed more than four times slower than the estimation. Then, aqueous solutions of rhodamine 6G (R6G), sulforhodamine 101 (SR101), and rhodamine B (RB) in the channels were measured by time-resolved fluorescence spectroscopy; spectra of the same solution in a 250-microm-sized channel were also measured as a reference for the macrospace. Although the fluorescence spectra in the 330-nm-, 850-nm- and 250-microm-sized channels agreed with one another, the fluorescent decays in the nanometer-sized channels were faster for R6G and SR101 and slower for RB than the respective decays in the 250-microm-sized channels. The results suggested the solutions had lower dielectric constants and higher viscosities in the nanometer-sized channels.

A new design and construction methodology for integration of complicated chemical processing on a microchip was proposed. This methodology, continuous-flow chemical processing (CFCP), is based on a combination of microunit operations (MUOs) and a multiphase flow network. Chemical operations in microchannels, such as mixing, reaction, and extraction, were classified into several MUOs. The complete procedure for Co(II) wet analysis, including a chelating reaction, solvent extraction, and purification was decomposed into MUOs and reconstructed as CFCP on a microchip. Chemical reaction and molecular transport were realized in and between continuous liquid flows in a multiphase flow network, such as aqueous/aqueous, aqueous/organic, and aqueous/organic/aqueous flows. When the determination of Co(II) in an admixture of Cu(II) was carried out using this methodology, the determination limit (2sigma) was obtained as 18 nM, and the absolute amount of Co chelates detected was 0.13 zmol, that is, 78 chelates. The sample analysis time was faster than that of a conventional processing system. Moreover, troublesome operations such as phase separation and acid and alkali washing, all necessary for the conventional system, were simplified. The CFCP methodology proposed here can be applied to various on-chip applications.

We developed a microsystem for cell experiments consisting of a scanning thermal lens microscope detection system and a cell culture microchip. The microchip system was good for liquid control in microspace, and this results in secure cell stimulation and coincident in vivo observation of the cell responses. The system could detect nonfluorescent biological substances with extremely high sensitivity without any labeling materials and had a high spatial resolution of approximately 1 microm. This system was applied to monitoring of cytochrome c distribution in a neuroblastoma-glioma hybrid cell cultured in the microflask (1 mm x 10 mm x 0.1 mm; 1 microL) fabricated in a glass microchip. Cytochrome c release from mitochondria to cytosol during the apoptosis process was successfully monitored with this system. The cytochrome c detected with this system was estimated to be approximately 10 zmol. We concluded that the system was suitable for measuring the distribution of chemical substances in a single cell because the microchip is good for liquid handling in microspace and the thermal lens microscope has high sensitivity and spatial resolution.

We demonstrated a liquid/liquid and a gas/liquid two-phase crossing flow in glass microchips. A 250-microm-wide microchannel for aqueous-phase flow was fabricated on a top glass plate. Then, as a way to utilize the surface energy difference for stable phase confluence and separation, a 250-microm-wide microchannel for organic-phase (or gas-phase) flow was fabricated on a bottom glass plate and the wall was chemically modified by octadecylsilane (ODS) group. The top and bottom plates were sealed only by pressure. A microchannel pattern was designed so that the two phases made contact at the crossing point of the straight microchannels. The crossing point was observed with an optical microscope. Results showed that the ODS modification of the microchannel wall clearly improved stability of the interface between the two fluids. Pressure difference between fluids was measured and the interface of water and nitrobenzene was stable for the pressure difference from +300 Pa to -200 Pa. The pressure drop in a countercurrent flow configuration was also estimated, and the pressure difference required to realize the counter current flow was less than the allowable pressure range. Finally, we discussed the advantages of utilizing this approach.

A sequential ion-sensing system using a single microchip was successfully realized. The system developed here involves intermittent pumping of plural organic phases into a microchannel, followed by contact with a single aqueous phase to form a stable organic-aqueous two-layer flow inside the microchannel. Because the plural organic phases created by intermittent flow contain the same lipophilic pH indicator dye but different ion-selective neutral ionophores, different ions can be sequentially and selectively extracted into the different organic phases, where they can be determined by thermal lens microscopy (TLM). We used KD-A3 as the lipophilic pH indicator dye and valinomycin and DD16C5 as neutral ionophores to demonstrate sequential ion sensing of potassium and sodium ions by measuring the deprotonated dye caused by the ion extraction. The integrated microfluidic system proposed here allows multi-ion sensing, which is not easily demonstrated by conventional ion sensor technology using a solvent polymeric membrane. The minimum volume of single organic phase needed to obtain an equilibrium response without dilution by cross dispersion of two organic phases was ca. 500 nL in our system, indicating that the required amounts of expensive reagents in one measurement could be reduced to 1.7 ng and 2.8 ng for the dye and ionophore molecules, respectively.

We have demonstrated that a miniaturized device with IR laser heating of the solvent, based on a photothermal effect, is capable of fast and localized control of an enzymatic reaction on a microchip under flow conditions. Using noncontact spectroscopic temperature-sensing techniques, we measured temperature dynamics and spatial distribution and compared the measurements with results of numerical simulation analysis. The device was operated at ultrafast heating and cooling rates of 67 and 53 degrees C/s, respectively, which is 30 times faster than conventional systems and 3-6 times faster than electrothermal miniaturized thermocyclers. The IR laser-mediated heater is characterized by a significantly reduced heated volume of only 5 nL, compared to existing chip-based systems with electrothermal heating. Direct heating of a sample with extremely small heat capacity led us to a fast heating rate, and efficient heat removal through heat transfer to the glass substrate resulted in a fast cooling rate. Reproducible temperature levels with dwell times shorter than 0.5 s were achieved. The enzyme reaction on a chip was successfully controlled with 0.6-s time resolution, using periodic photothermal heating by IR laser. The IR diode laser is compact and thus suits well the miniaturized system design. Our work gives the basis for integration in a chip format of a variety of chemical processes that require fast temperature control.

The photothermal effect of an ultratrace amount of nonfluorescent molecules in liquid was determined by optimizing the optical arrangement for a thermal lens microscope. The optimized experimental setup could be determined from the evaluation of probing volume and the concentration of the sample solutions even when the expectation of the molecule number in the probing region was less than a single molecule. The minimum expectation, which is explained as being the time average, was 0.4 molecule of Pb(II) octaethylporphyrin (OEP) in benzene. The concentrations in the 9.7 x 10(-11)-7.8 x 10(-10) M region used in this work corresponded to the expected number of 0.4-3.4 molecules, and the calibration curve in this region showed good linearity. Taking into account the enhancement factor of solvent, the molar absorption coefficient of solute, and the optimization of the optical arrangement, the present result, which was the determination limit of 0.34, was consistent with that previously reported. The relation between molecular behavior in the probing volume and the signal was discussed. The average temperature rise in the probing volume by the photothermal effect for the single OEP molecule was estimated as 3.1 muK, and this value was detectable, based on conventional thermal lens measurements for bulk scale sample.

A bead-bed immunoassay system was structured on a microchip and applied to determine carcinoembryonic antigen (CEA), which is a commonly used marker of colon cancer. Polystyrene beads precoated with anti-CEA antibody were introduced into a microchannel, and then a serum sample containing CEA, the first antibody, and the second antibody conjugated with colloidal gold were reacted successively. The resulting antigen-antibodies complex, fixed on the bead surface, was detected using a thermal lens microscope (TLM). A highly selective and sensitive determination of an ultratrace amount of CEA in human sera was made possible by a sandwich immunoassay system that needs three antibodies for an assay. A detection limit dozens of times lower than the conventional ELISA was achieved. Moreover, when serum samples for 13 patients were assayed with this system, there was a high correlation (r = 0.917) with the conventional ELISA. The integration reduced the time necessary for the antigen-antibody reaction to approximately 1%, thus shortening the overall analysis time from 45 h to 35 min. Moreover, troublesome operations required for conventional heterogeneous immunoassays could be much simplified. This microchip-based diagnosis system is the first microchip-based system that is practically useful for clinical diagnoses with short analysis time, high sensitivity, and easy procedures.

An ion-pair solvent extraction was performed in a microchannel fabricated in a quartz glass chip. the aqueous solution of Fe-bathophenanthrolinedisulfonic acid complex and the chloroform solution of tri-n-octylmethylammonium chloride were introduced into the microchannel, and a parallel two-phase laminar flow was formed. The ion-pair product extracted in chloroform was monitored by the thermal lens microscope. The ion-pair product was gradually extracted from aqueous solution into chloroform when the flow was very slow or stopped, while nothing was extracted into chloroform when the flow was fast. The time for extraction in the present 250 microns microchannel, 45 s, roughly coincided with the molecular diffusion time, and the extraction time was at least 1 order shorter compared with the ordinary extraction time using a separatory funnel and mechanical shaking. The microspace in the microchannel was characterized by the large specific interface area and short diffusion distance, and these characteristics may contribute to highly efficient extraction without mechanical shaking. The success of this molecular transport may lead to the integration of more complicated separation and chemical operations on a microchip and more applications.

An immunosorbent assay system was integrated into a glass microchip. Polystyrene beads were introduced into a microchannel, and then human secretory immunoglobulin A (s-IgA) adsorbed on the bead surface was reacted with colloidal gold conjugated anti-s-IgA antibody and detected by a thermal lens microscope. The scale merits of liquid microspace on the molecular behavior remarkably contributed to reduced assay time. The integration cut the time necessary for the antigen-antibody reaction by 1/90, thus shortening the overall analysis time from 24 h to less than 1 h. Moreover, troublesome operations required for conventional immunosorbent assays could be replaced by simple operations.