Search

A new means of acquiring overtone mobility spectrometry (OMS) data sets that allows distributions of ions for a prescribed overtone number is described. In this approach, the drift fields applied to specific OMS drift regions are varied to make it possible to select different ions from a specific overtone that is resonant over a range of applied frequencies. This is accomplished by applying different fields for fixed ratios of time while scanning the applied frequency. The ability to eliminate peaks from all but a single overtone region overcomes a significant limitation associated with OMS analysis of unknowns, especially in mixtures. Specifically, a priori knowledge via selection of the overtone used to separate ions makes it possible to directly determine ion mobilities for unknown species and collision cross sections (assuming that the ion charge state is known). We refer to this selection method of operation as selected overtone mobility spectrometry (SOMS). A simple theoretical description of the SOMS approach is provided. Simulations are carried out and discussed in order to illustrate the advantages and disadvantages of SOMS compared with traditional OMS. Finally, the SOMS method (and its distinction from OMS) is demonstrated experimentally by examining a mixture of peptides generated by enzymatic digestion of the equine cytochrome c with trypsin.

Glycation by endogenous dicarbonyl metabolites such as glyoxal is an important spontaneous post-translational (PTM) modification of peptides and proteins associated with structural and functional impairment. The aim of this study was to investigate types and site of PTM of glyoxal-derived advanced glycation end-products-in the neuropeptide substance P by ultrahigh-resolution Fourier transform ion cyclotron resonance (FTICR), mass spectrometry, and tandem mass spectrometry (MS/MS) experiments. The main site of PTM by glyoxal was the side chain guanidine moiety of the arginine residue. Binding site identification has been achieved by electron capture dissociation, double-resonance electron capture dissociation, and collision-activated dissociation, with assignment of the modified amino acid residue with mass error <1 ppm.

Although water ice has been utilized in the past as a matrix for infrared matrix-assisted laser desorption/ionization mass spectrometry (IR-MALDI-MS), it has not found a wider use due to limitations in the analytical performance and technical demands on the employment of the necessary cooling stage. Here, we developed a temperature-controlled sample stage for use with an orthogonal time-of-flight mass spectrometer (MALDI-o-TOF-MS). The stage utilizes a combination of liquid nitrogen cooling and counterheating with a Peltier element. It allows adjustment of the sample temperature between ~-120 °C and room temperature. To identify optimal irradiation conditions for IR-MALDI with the water ice matrix, we first investigated the influence of excitation wavelength, varied between 2.7 and 3.1 μm, and laser fluence on the signal intensities of molecular substance P ions. These data suggest the involvement of transient melting of the ice during the laser pulse and primary energy deposition into liquid water. As a consequence, the best analytical performance is obtained at a wavelength corresponding to the absorption maximum of liquid water of about 2.94 μm. The current data significantly surpass the previously reported analytical features. The particular softness of the method is, for example, exemplified by the analysis of noncovalently bound holo-myoglobin and of ribonuclease B. This is also the first report demonstrating the analysis of an IgG monoclonal antibody (MW ~ 150 kDa) from a water ice matrix. Untypical for MALDI-MS, high charge states of multiply protonated species were moreover observed for some of the investigated peptides and even for lacto-N-fucopentaose II oligosaccharides. Using water ice as matrix is of particular interest for MALDI MS profiling and imaging applications since matrix-free spectra are produced. The MS and tandem MS analysis of metabolites directly from frozen food samples is demonstrated with the example of a strawberry fruit.

Atmospheric pressure electron capture dissociation (AP-ECD) is an emerging technique with the potential to be a more accessible alternative to conventional ECD/electron transfer dissociation (ETD) methods because it can be implemented using a stand-alone ion source device suitable for use with any existing or future electrospray ionization mass spectrometer. With AP-ECD, no modification of the main instrument is required, so it may easily be retrofitted to instruments not originally equipped with ECD/ETD capabilities. Here, we present our first purpose-built AP-ECD source and demonstrate its use in conjunction with capillary LC for the analysis of substance P, a tryptic digest of bovine serum albumin, and a phosphopeptide mixture. Quality ECD spectra were obtained for all the samples at the low femtomole level, proving that LC-AP-ECD-MS is suitable for the structural analysis of peptides and protein digests, in this case using an unmodified quadrupole time-of-flight mass spectrometer built ca. 2002.

Molecular and macromolecular structure analysis by high resolution and accurate mass spectrometry (MS) is indispensable for a number of fundamental and applied research areas, including health and energy domains. Comprehensive structure analysis of molecules and macromolecules present in the extremely complex samples and performed under time-constrained experimental conditions demands a substantial increase in the acquisition speed of high resolution MS data. We demonstrate here that signal processing based on the filter diagonalization method (FDM) provides the required resolution for shorter experimental transient signals in ion cyclotron resonance (ICR) MS compared to the Fourier transform (FT) processing. We thus present the development of a FDM-based MS (FDM MS) and demonstrate its implementation in ICR MS. The considered FDM MS applications are in bottom-up and top-down proteomics, metabolomics, and petroleomics.

Matrix-assisted laser desorption ionization (MALDI) allows for the mass spectrometric (MS) analysis of thermally labile, non-volatile biomolecules. However, some residual analyte fragmentation typically accompanies the phase transition from the condensed to the gas phase and following plume expansion, even under optimized conditions. In-source decay (ISD) and post-source decay (PSD) MALDI MS are two techniques that make use of these phenomena and that can provide useful structural information by producing characteristic fragment ions of the analyte compounds. In orthogonal extracting time-of-flight mass spectrometry (o-TOF-MS), the pressure of the cooling gas in the ion source has a strong influence on the extent of analyte ion fragmentation. We investigated the effect of this parameter on peptide and oligosaccharide fragmentation by examining a range of pressures (from 0.05-1.8 mbar) in combination with seven different buffer gases (He, Ne, Ar, N(2), CO(2), CH(3), isobutane). Ions were generated by ultraviolet (UV) and/or by infrared (IR) MALDI. The influence of the ion extraction voltage on the analyte fragmentation also was investigated for a selected set of gas parameters. We observed that individual fragment ions exhibit characteristic fragment yield-pressure dependencies that can be classified into three groups. Type I ions resemble species that are also found in MALDI PSD MS analysis, while type II ions resemble typical ISD fragments. The yield-pressure relationship of type III ions suggests that these are the result of a combination of both processes. Comparing the yields of fragmentation for the different buffer gases reveals a correlation between their internal degrees of freedom and their collisional cooling efficiency. Changing the buffer gas pressure and/or extraction field provides an easy means to influence analyte ion fragmentation and to switch from the primary production of one type of fragment species to another. The method can therefore facilitate the structural characterization of MALDI-generated ions.

The fragmentation of natural peptides using dynamic collision-induced dissociation (DCID), a novel fragmentation method for quadrupole ion traps, is demonstrated. Using leucine enkephalin as a diagnostic molecule, the fragmentation efficiencies and energetics of DCID are compared with other methods of collisional activation in ion traps such as conventional on-resonance excitation and high-amplitude short-time excitation (HASTE). A typical fragmentation efficiency of approximately 20% is achieved for DCID, which is significantly lower than conventional CID (maximum near 80%). Tandem mass spectra of two other peptides, substance P and oxidized insulin alpha-chain, demonstrate that product ion spectra for DCID are comparable to conventional or HASTE CID. Because DCID achieves fragmentation during the standard mass acquisition scan, no extra time is necessary for on-resonance excitation or product ion collection, so analysis times are reduced by a minimum of 10-15% depending on the scanning conditions. DCID therefore offers more tandem mass spectra per second than conventional methods of collisional activation, which could be highly advantageous for bottom-up proteomics separations.

Fragmentation of protonated peptide ions via interaction with low kinetic energy electronicallyexcited metastable argon atoms was studied in a linear trap-time-of-flight mass spectrometer. Metastable argon atoms were generated using a glow discharge-type source. Protonated peptide ions of substance P, bradykinin, fibrinopetide A, and insulin oxidized chain B were produced by electrospray ionization and trapped in a quadrupole ion guide for 100-400 ms. Intensive series of c- and z-ions were observed in all cases. The kinetic measurements of the fragmentation rates are consistent with calculations of the reaction cross section based on the Landau-Zener approximation.

Individual airborne biomolecule-containing particles were detected and characterized in near real-time by matrix-assisted laser desorption/ionization (MALDI) with an ion trap mass spectrometer. Biomolecule-containing particles were laboratory-generated and passed through a heated region containing a solution of matrix in equilibrium with the gas phase. Passage into a cooler region created a supersaturation, resulting in rapid deposition of the matrix vapor onto the biomolecule-containing particles, whereupon they were sampled into the inlet of our spectrometer. The coated particles were collimated and individually sized by light-scattering-based time-of-flight. When the sized particle reached the center of the ion trap, it was irradiated with a focused 266-nm laser, and the resulting ions were mass-analyzed. Mass spectra of leucine enkephalin, bradykinin, substance P, and polylysine-containing particles were determined with attomole sensitivity. Structural information of the peptides contained in an individual particle was obtained by tandem mass spectrometry. Analysis of the results yields insights into the aerosol laser ablation ionization process that suggests an optically limited mechanism for ion production that has interesting ramifications on the utility of aerosol-based MALDI as an analytical technique.

A new technique called selective excitation of ions for consecutive activation (SEICA) is proposed for obtaining complementary fragmentation mass spectra from the same precursor ion population. SEICA utilizes precursor ions remaining intact after electron capture dissociation or another ion-electron reaction for efficient MS/MS based on a vibrational excitation (VE) technique, such as infrared multiphoton dissociation. SEICA uses the ability of ion-trapping instruments to detect product ions while retaining inside the trap intact precursor ions, making the latter available for consecutive activation by a VE technique. The possibility of practical implementation of SEICA by software-only modification of a commercial instrument is demonstrated. A 2-fold increase in the efficiency is achieved for both "single-scan" and "multiple-scan" experiments. This improvement can be particularly important for high-sensitivity applications in, for example, proteomics, where limited ECD efficiency poses an obstacle for broad implementation of this technique.

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry has demonstrated great potential to replace gel electrophoresis for DNA sequence analysis. A current limitation in this method is, however, the decreased sensitivity with increasing mass of DNA molecules. In the present study, instrumental effects on the mass analysis of DNA molecules were investigated quantitatively using an equimolar DNA mixture. It is shown that detection efficiency, detector saturation, and ion beam divergence account for the entirety of the observed falloff in signal intensity with increasing mass. Although the present study focused upon the analysis of DNA mixtures, the instrumental effects observed apply equally to other macromolecular mixtures (e.g., proteins, polymers).

A quantitative model of ionization in ultraviolet matrix-assisted laser desorption/ionization (Knochenmuss, R. J. Mass Spectrom. 2002, 37, 867) is extended to include secondary ion-molecule reactions. Matrix-to-analyte charge-transfer reaction kinetics are described by a hard-sphere Arrhenius expression. The activation energy is derived from the reaction exoergicity using a nonlinear free energy relationship. The approach is applied to the specific case of proton-transfer reactions. With no adjustable parameters, the model correctly predicts the existence and characteristics of the matrix and analyte suppression effects, the shapes of the two-pulse time-delayed yield curves, and the dependence of analyte yields on laser fluence, molecular weight, relative concentrations, and reaction exoergicity.

An approach that exploits the surface of a solid adsorbent is proposed for precolumn FMOC derivatization of amino acids and peptides. Amino acids (Ser, Glu, GABA, Val, Phe, Lys) and two neuropeptides (substance P and Leuenkephalin) were adsorbed on alkaline silica gel cartridges. After drying, they were reacted with 9-fluorenyl-methyl chloroformate (FMOC-Cl) in toluene. After washing off the excess FMOC-Cl with ethyl acetate, the derivatives were eluted with aqueous eluant. The eluates were separated and detected by means of HPLC with fluorescence detection. Compared with the traditional derivatization in the liquid phase, the extent of formation of byproducts of FMOC-Cl with water was greatly decreased, and the excess FMOC-Cl was eliminated completely.

Various sugars, peptides, and lipids were analyzed on a Fourier transform mass spectrometer using laser desorption and ionization with and without the assistance of matrixes. A compact Nd:YAG laser with an output at 1.06 microns corresponding to fundamental frequency was employed. Gram-negative and Gram-positive bacteria were also subjected to laser desorption mass spectrometry. Characteristics ions of conjugated lipid, formed by attachment of alkali metal cations, endogenous to the cells, were observed. Particle/liquid matrixes (e.g., cobalt in glycerol) proved to be useful with the 1.06-micron laser. The particles absorb efficiently laser radiation in a broad wavelength range. The liquid provides the same advantages as in fast atom bombardment: increased signal-to-noise ratios and enhanced sample lifetimes. The effect of laser power on total ion current was shown to differ for samples with and without the particle/liquid matrix. The Fourier transform analyzer provides MS/MS capability for both positive and negative ions from complex mixtures. Ions desorbed externally are introduced into the cell via a quadrupole ion guide with a lower mass cutoff. Such a setup allows matrix ions to be excluded and thus provides excellent signal-to-noise ratios for lower mass range fragment ions formed inside the cell.

Immobilized sulfonate dyes are widely used for protein separation and purification, but the mode of interaction between the dye molecules and the proteins is largely unknown. Here we show that specific noncovalent dye-protein and dye-peptide complexes can be observed using MALDI mass spectrometry. We prove that the interaction is prodominantly electrostatic and that it involves protonated sites of the peptides and proteins, including the NH2 terminus, and deprotonated SO3 groups of the dyes. Furthermore, we show that MALDI-MS of such complexes with a nonacidic matrix, p-nitro-aniline, can be used to determine the number of accessible basic sites of a protein or peptide in its folded structure. Our results are in good agreement with measurements of the same property done with electrospray ionization.

Significantly improved sensitivity for analysis of biomolecules by MALDI FT-ICR mass spectrometry is achieved by (i) microscope-monitored sample deposition onto a small indentation on the probe tip and (ii) multiple remeasurement of ions from a single laser shot. A simple modification to the solids probe tip allows for microdeposition of a few amols of analyte onto small indentation spots previously aligned with the laser beam. Ion multiple remeasurement of the same ion packet enhances the signal-to-noise ratio and thus extends the achievable FT-ICR MS detection limit. We demonstrate that FT-ICR can be used to detect parent and structurally significant fragment ions of peptides and phospholipids at low amol amounts. Positive ion mass spectra for approximately 90 amol of a mixture of angiotensin II and bradykinin, approximately 40 amol of dipalmitoylglycerophosphatidylcholine, and approximately 8 amol of substance P constitute the lowest reported detection limits to date for FT-ICR mass analysis of MALDI-generated ions.

Sequence-specific fragmentation for structural analysis has been generated by activation of ions via matrix-assisted laser desorption/ionization (MALDI) in an ion trap storage/reflectron time-of-flight device (IT/reTOF). The key to this work is that ion decay can be induced by MALDI activation but requires an extended period of time to occur in large peptides. This extended decay period, which may be in excess of 20 ms, is provided in these experiments using the long storage times of the ion trap device. The ions are stored until decay is complete and then rapidly pulsed into a reflectron TOF for analysis. Since the ions decay within the trap, they ultimately appear as stable ions in the reTOF rather than as metastable decay peaks. The ion fragmentation was found to depend strongly on laser power and the rf voltage placed on the ring electrode of the trap. The fragmentation obtained was shown to be similar to but different from that observed in FAB-low-energy CAD. In particular, enhanced fragmentation was obtained in the lower mass range and large species could be more easily fragmented than with FAB-low-energy CAD. The types of fragmentation for several target peptides are discussed.

The low-energy collision-induced dissociation reactions of a series of multiply-protonated peptides have been investigated by tandem mass spectrometry. It is known that doubly-protonated tryptic peptides undergo facile fragmentation yielding redundant sequence information. The present work has shown that this fortunate circumstance seems likely to be the exception rather than the rule. The presence of additional basic residues, at positions other than the C-terminus, complicates the spectra. The most important such complication discovered in the present work involves wholesale transfer of one or two residues from the C-terminal end of a doubly-charged b fragment to the side chain of a lysine residue located near the N-terminus, resulting in mass shifts of the products of subsequent second-stage fragmentations. Other examples of the participation of the flexible lysine side chain are suggested but could not be confirmed to the same extent. The role of Coulombic repulsion in facilitating fragmentation has been explored via investigations of triply- and quadruply-protonated basic peptides bearing one charge for every three or four amino acid residues. Such species yielded almost no sequence information under low-energy collision conditions, due to the localization of the ionizing protons on highly basic sites rather than on the peptide backbone. It is proposed that collisionally activated mobilization of protons from the basic sites, where they are originally located upon formation, to the backbone is a necessary condition for structurally useful fragmentation to occur. It was not possible, on the basis of the present work, to deduce mechanistic generalizations and predictive schemes which would permit structural interpretations of such fragment spectra for unknown peptides.