Search

Catalytic precipitation and subsequent electrochemical oxidation or reduction of a redox-active precipitate has been widely used in electrochemical biosensors. However, such biosensors often do not allow for low detection limits due to a low rate of precipitation, nonspecific precipitation, loose binding of the precipitate to the electrode surface, and insulating behavior of the precipitate within a normal potential window. Here, we report an ultrasensitive electrochemical immunosensor for parathyroid hormone (PTH) detection based on DT-diaphorase (DT-D)-catalyzed formation of an organic precipitate and electrochemical oxidation of the precipitate. In the present study we found that DT-D can be used as a catalytic label in precipitation-based affinity biosensors because DT-D catalyzes fast reduction of 3-(4,-5-dimethylthiazo-2-yl)-2,5-diphenyltetrazolium bromide (MTT) to MTT-formazan precipitate; the MTT reduction does not occur in the absence of DT-D; and a high electrochemical signal is obtained at low potentials during electrodissolution of MTT-formazan precipitate. The immunosensor is fabricated using a silane copolymer-modified ITO electrode surface that is suitable for both efficient and strong adsorption of MTT-formazan precipitate. When the enzymatic MTT-formazan precipitation and subsequent MTT-formazan electrodissolution is applied to a sandwich-type immunosensor, PTH can be detected over a wide range of concentrations with a very low detection limit (∼1 pg/mL) in artificial serum. The measured concentrations of PTH in clinical serum samples showed high similarity with those obtained using a commercial instrument.

Both high sensitivity and high specificity are crucial for detection of miRNAs that have emerged as important clinical biomarkers. Just Another Zinc finger proteins (JAZ, ZNF346) bind preferably (but nonsequence-specifically) to DNA-RNA hybrids over single-stranded RNAs, single-stranded DNAs, and double-stranded DNAs. We present an ultrasensitive and highly specific electrochemical method for miRNA-21 detection based on the selective binding of JAZ to the DNA-RNA hybrid formed between a DNA capture probe and a target miRNA-21. This enables us to use chemically stable DNA as a capture probe instead of RNA as well as to apply a standard sandwich-type assay format to miRNA detection. High signal amplification is obtained by (i) enzymatic amplification by alkaline phosphatase (ALP) coupled with (ii) electrochemical-chemical-chemical (ECC) redox cycling involving an ALP product (hydroquinone). Low nonspecific adsorption of ALP-conjugated JAZ is obtained using a polymeric self-assembled-monolayer-modified and casein-treated indium-tin oxide electrode. The detection method can discriminate between target miRNA-21 and nontarget nucleic acids (DNA-DNA hybrid, single-stranded DNA, miRNA-125b, miRNA-155, single-base mismatched miRNA, and three-base mismatched miRNA). The detection limits for miRNA-21 in buffer and 10-fold diluted serum are approximately 2 and 30 fM, respectively, indicating that the detection method is ultrasensitive. This detection method can be readily extended to multiplex detection of miRNAs with only one ALP-conjugated JAZ probe due to its nonsequence-specific binding character. We also believe that the method could offer a promising solution for point-of-care testing of miRNAs in body fluids.

The development of novel fluorescent probes for monitoring the concentration of various biomolecules in living systems has great potential for eventual early diagnosis and disease intervention. Selective detection of competitive species in biological systems is a great challenge for the design and development of fluorescent probes. To improve on the design of fluorescent coumarin-based biothiol sensing technologies, we have developed herein an enhanced dual emission doubly activated system (DACP-1 and the closely related DACP-2) for the selective detection of glutathione (GSH) through the use of one optical channel and the detection of cysteine (Cys) by another channel. A phenylselenium group present at the 4-position completely quenches the fluorescence of the probe via photoinduced electron transfer to give a nonfluorescent species. Probes are selective for glutathione (GSH) in the red region and for cysteine/homocysteine (Cys/Hcy) in the green region. When they were treated with GSH, DACP-1 and DACP-2 showed strong fluorescence enhancement in comparison to that for closely related species such as amino acids, including Cys/Hcy. Fluorescence quantum yields (Φ

Nanoparticles and microparticles have many potential biomedical applications ranging from imaging to drug delivery. Therefore, in vitro systems that can analyze and optimize the interaction of such particles with cells may be beneficial. Here, we report a microfluidic system that can be used to study these interactions. As a model system, we evaluated the interaction of polymeric nanoparticles and microparticles and similar particles conjugated to aptamers that recognize the transmembrane prostate specific membrane antigen (PSMA), with cells seeded in microchannels. The binding of particles to cells that expressed or did not express the PSMA (LNCaP or PC3, respectively) were evaluated with respect to changes in fluid shear stress, PSMA expression on target cells, and particle size. Nanoparticle-aptamer bioconjugates selectively adhered to LNCaP but not PC3 cells at static and low shear (1 dyn/cm2) but not higher shear (approximately 4.5 dyn/cm2) conditions. Control nanoparticles and microparticles lacking aptamers and microparticle-aptamer bioconjugates did not adhere to LNCaP cells, even under very low shear conditions (approximately 0.28 dyn/cm2). These results demonstrate that the interaction of particles with cells can be studied under controlled conditions, which may aid in the engineering of desired particle characteristics. The scalability, low cost, reproducibility, and high-throughput capability of this technology is potentially beneficial to examining and optimizing a wide array of cell-particle systems prior to in vivo experiments.

The control of surface properties and spatial presentation of functional molecules within a microfluidic channel is important for the development of diagnostic assays and microreactors and for performing fundamental studies of cell biology and fluid mechanics. Here, we present a simple technique, applicable to many soft lithographic methods, to fabricate robust microchannels with precise control over the spatial properties of the substrate. In this approach, the patterned regions were protected from oxygen plasma by controlling the dimensions of the poly(dimethylsiloxane) (PDMS) stamp and by leaving the stamp in place during the plasma treatment process. The PDMS stamp was then removed, and the microfluidic mold was irreversibly bonded to the substrate. The approach was used to pattern a nonbiofouling poly(ethylene glycol)-based copolymer or the polysaccharide hyaluronic acid within microfluidic channels. These nonbiofouling patterns were then used to fabricate arrays of fibronectin and bovine serum albumin as well as mammalian cells. In addition, further control over the deposition of multiple proteins onto multiple or individual patterns was achieved using laminar flow. Also, cells that were patterned within channels remained viable and capable of performing intracellular reactions and could be potentially lysed for analysis.