Search

This paper presents a new strategy to combine the power of antibody based capturing of target species in complex samples with the benefits of microfluidic reverse phase sample preparation on an integrated sample enrichment target (RP-ISET) and the analysis speed of MALDI MS. The immunoaffinity step is performed on an in-house developed 3D-structured high surface area porous silicon (PSi) matrix, which allows efficient antibody immobilization by surface adsorption without any coupling agents in 30-60 min. The hydrophilic nature of the porous silicon surface at the molecular level displays a low adsorption of background peptides when exposed to complex digests or plasma samples, improving the conditions for the antigen specific extraction and subsequent readout. At the same time, the hydrophobic behavior, due to the nanostructured surface, of the PSi material facilitates liquid confinement during the assay. Using a footprint conforming to the standard for 384 well microplates, direct adaption of the protocol into standard sample handling robots is possible. The performance of the proposed immunoaffinity PSi-ISET immunoMALDI (iMALDI) assay was evaluated by specific detection of angiotensin I at a 10 femtomol level in diluted plasma samples (10 μL, 1 nM).

Microchip immobilized enzyme reactors (microIMERs) with immobilized endoglucanases were applied for the hydrolysis of methyl cellulose (MC). MCs of various molecular weights were hydrolyzed using two microIMERs containing immobilized celloendoglucanase Cel 5A from Bacillus agaradhaerens (BaCel 5A) connected in series. Hydrolysis by the microIMER could be confirmed from the average molar masses and molar mass distributions measured by size exclusion chromatography (SEC) with online multiangle light scattering and refractive index detection. Methylated cellooligosaccharides with degrees of polymerization (DP) between 1 and 6 formed during hydrolysis were analyzed by direct infusion electrospray ionization ion-trap mass spectrometry (ESI-ITMS). Mass spectra of microIMER- and batch-hydrolyzed samples were compared and no significant differences were found, indicating that microIMER hydrolysis was as efficient as conventional batch hydrolysis. A fast and automated hydrolysis with online MS detection was achieved by connecting the microIMER to high-performance liquid chromatography and ESI-ITMS. This online separation reduced the relative intensities of interfering signals and increased the signal-to-noise ratios in MS. The microIMER hydrolysates were also subjected to SEC interfaced with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. With this technique, oligomers with DP 3-30 could be detected. The hydrolysis by the microIMER was performed within 60 min, i.e. significantly faster compared with batch hydrolysis usually performed for at least 24 h. The microIMER also allowed hydrolysis after 10 days of continuous use. The method presented in this work offers new approaches for the analysis of derivatized cellulose and provides the possibility of convenient online, fast, and more versatile analysis compared with the traditional batch method.

A microfluidic system for long-term real-time monitoring of dynamic cellular events of immobilized human cells was investigated. The luciferase reporter gene activity in the reporter cell line HFF11, based on HeLa cells, was used as the model system. The cells were immobilized on silicon flow-through microchips and continuously supplied with a cell medium at 2 microL/min while maintaining the chip at 37 degrees C. The HFF11 cell line was designed for high-throughput screening of ligands for seven-transmembrane receptors. When a ligand binds, the receptor is activated and a cascade of intracellular reactions starts, ending with the synthesis of the reporter protein Photinus luciferase. The major goal was to develop a microfluidic system for continuous long-term assaying of the intracellular reporter gene activity in real time and determine the conditions, which could minimize cells stress and hence unspecific expression of the reporter gene. In the resulting microfluidic system and assay protocol, the cell microchip could be kept and assayed for a period up to 30 h. The developed system and data outcome was compared with a corresponding microtiter plate performed with the same cell line to highlight the advantages obtained in the microfluidic format.

Silicon microchips with immobilized antibodies were used to develop microfluidic enzyme immunoassays using chemiluminescence detection and horseradish peroxidase (HRP) as the enzyme label. Polyclonal anti-atrazine antibodies were coupled to the silicon microchip surface with an overall dimension of 13.1 x 3.2 mm, comprising 42 porous flow channels of 235-microm depth and 25-microm width. Different immobilization protocols based on covalent or noncovalent modification of the silica surface with 3-aminopropyltriethoxysilane (APTES) or 3-glycidoxypropyltrimethoxysilane (GOPS), linear polyethylenimine (LPEI, MW 750,000), or branched polyethylenimine (BPEI, MW 25,000), followed by adsorption or covalent attachment of the antibody, were evaluated to reach the best reusability, stability, and sensitivity of the microfluidic enzyme immunoassay (microFEIA). Adsorption of antibodies on a LPEI-modified silica surface and covalent attachment to physically adsorbed BPEI lead to unstable antibody coatings. Covalent coupling of antibodies via glutaraldehyde (GA) to three different functionalized silica surfaces (APTES-GA, LPEI-GA, and GOPS-BPEI-GA) resulted in antibody coatings that could be completely regenerated using 0.4 M glycine/HCl, pH 2.2. The buffer composition was shown to have a dramatic effect on the assay stability, where the commonly used phosphate buffer saline was proved to be the least suitable choice. The best long-term stability was obtained for the LPEI-GA surface with no loss of antibody activity during one month. The detection limits in the microFEIA for the three different immuno surfaces were 45, 3.8, and 0.80 ng/L (209, 17.7, and 3.7 pM) for APTES-GA, LPEI-GA, and GOPS-BPEI-GA, respectively.

Protein identification through peptide mass mapping by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) has become a standard technique, used in many laboratories around the world. The traditional methodology often includes long incubations (6-24 h) and extensive manual steps. In an effort to address this, an integrated microanalytical platform has been developed for automated identification of proteins. The silicon micromachined analytical tools, i.e., the microchip immobilized enzyme reactor (mu-chip IMER), the piezoelectric microdispenser, and the high-density nanovial target plates, are the cornerstones in the system. The mu-chip IMER provides on-line enzymatic digestion of protein samples (1 microL) within 1-3 min, and the microdispenser enables subsequent on-line picoliter sample preparation in a high-density format. Interfaced to automated MALDI-TOF MS, these tools compose a highly efficient platform that can analyze 100 protein samples in 3.5 h. Kinetic studies on the microreactors are reported as well as the operation of this microanalytical platform for protein identification, wherein lysozyme, myoglobin, ribonuclease A, and cytochrome c have been identified with a high sequence coverage (50-100%).