Search

Inductively coupled plasma-mass spectrometry (ICP-MS) with elemental labeling is a promising strategy for multiplex microRNA (miRNA) analysis. However, it is still challenging for specific analysis of multiple miRNAs with high homology, and the development of multiplex assays is always limited by the complexity of the sequence design. Herein, a simple and direct ICP-MS-based assay was developed for the simultaneous detection of three miRNAs by combining the lanthanide labeling strategy with entropy-driven catalytic (EDC) amplification. Owing to the specificity of EDC for nucleic acid recognition, it is able to differentiate miRNAs with single-base mutation in each EDC circuit. A universal biotin-labeled DNA strand was designed to hybridize with the DNA substrates for three EDC circuits, targeting miRNA-21, miRNA-155, and miRNA-10b, respectively. All the substrates were loaded on the surface of streptavidin magnetic beads. In the presence of target miRNA, the EDC reaction was initiated, and EDC substrates were dissociated, continuously releasing reporter strands that were labeled with lanthanides (Tb/Ho/Lu). After magnetic separation, the supernatant containing the released reporter strands was introduced into an ICP-MS system for simultaneous detection of

A highly sensitive and simple method based on rolling circle amplification (RCA) and single particle inductively coupled plasma mass spectrometry (spICP-MS) was proposed for the homogeneous detection of hepatitis B virus (HBV) deoxyribonucleic acid (DNA). In the presence of target DNA, long ssDNA possessing a large number of repeating sequence units was generated by RCA. DNA-labeled AuNP probes assembled into long chains based on complementary base pairing, further aggregating into large particles. Small Au NPs hardly produced pulse signals in spICP-MS; obvious pulse signals appeared in spICP-MS after the agglomeration of Au NPs caused by the addition of RCA products and spermidine. On the basis of this, the homogeneous detection of target DNA was realized by spICP-MS with high sensitivity. Under optimal conditions, the proposed method exhibited a good linear relationship between the frequency of the pulse signal of Au in spICP-MS and the concentration of target HBV DNA in the range of 10-2000 fmol L

High-throughput single-cell analysis is critical to elucidate the cell heterogeneity. Recently, droplet microchips using oil/gas phases to generate single-cell encapsulated droplets have been combined with inductively coupled plasma-mass spectrometry (ICP-MS) for determination of trace elements in single cells with a throughput of dozens of cells per min. To improve the sample throughput and avoid the oil phase introduced into ICP-MS, herein, a negative magnetophoresis focusing microchip was established and online-coupled to ICP-MS for single-cell analysis. MCF-7 cells in the paramagnetic salt solution were introduced into the designed focusing microchannel, in which they were focused into a single stream under both the magnetic repulsion force and inertial lift force, and then were introduced into ICP-MS for online single-cell analysis. The important parameters including the chip design, the concentration of the paramagnetic salt solution, flow rate, cell density, and dwell time were optimized. Under the optimal conditions, a high sample throughput of 1390 cells min

This work reported a simple and ultrasensitive label-free method for the detection of hepatitis B virus (HBV) DNA by combining hyperbranched rolling circle amplification (HRCA) with dual-mode detection by inductively coupled plasma mass spectrometry (ICP-MS) and fluorescence using ruthenium complex [Ru(bpy)2dppz]2+ (bpy = 2,2'-bipyridine, dppz = dipyrido [3,2-a:2',3'-c] phenazine) as a dual functional probe. An HBV DNA-initiated HRCA system was designed to realize the highly efficient amplification of HBV DNA with the generation of a mass of dsDNA. Also, the [Ru(bpy)2dppz]2+ probe was then added to intercalate into the dsDNA products, resulting in strong fluorescence recovery of the probe for fluorescence detection. Meanwhile, using a biotin-modified primer in HRCA, the dsDNA-[Ru(bpy)2dppz]2+ complexes could be captured by the avidin-coated 96-well plates, and the captured [Ru(bpy)2dppz]2+ probe was later desorbed by acid for ICP-MS detection. The linear range of the proposed method was 3.5-200 amol L-1 and the limit of detection (LOD) was 1 amol L-1 for ICP-MS detection, while the linear range was 20-500 amol L-1 and the LOD was 9.6 amol L-1 for fluorescence detection. The developed method was applied to human serum sample analysis, and the analytical results coincided very well with those obtained by the real-time polymerase chain reaction (PCR) method. The developed dual-mode label-free detection method was ultrasensitive, simple, and accurate, showing great potential for therapeutic monitoring of HBV infection.

Quantification of multiple disease-related microRNAs (miRNAs) is of great significance for clinical diagnosis. Based on the simultaneous multiple element detection ability of inductively coupled plasma-mass spectrometry (ICP-MS) and good specificity of multicomponent nucleic acid enzymes (MNAzymes), a novel and simple method based on the MNAzyme amplification strategy and lanthanide labeling coupled with ICP-MS detection was proposed for the sensitive and simultaneous detection of three miRNAs (miRNA-21, miRNA-155, and miRNA-10b). Specifically, a probe consisting of streptavidin-modified magnetic beads (SA-MBs) and three DNA substrates labeled with lanthanide tags (159Tb/165Ho/175Lu) was constructed. In the presence of target miRNAs, three pairs of MNAzymes were assembled where each pair was hybridized with the corresponding miRNA, and then the substrates on the SA-MBs were cleaved by the activated MNAzymes, continuously releasing the fragment with lanthanide tags. The released lanthanide tags in the supernatant were collected after magnetic separation and analyzed by ICP-MS, realizing the simultaneous quantification of multiple miRNAs. The correlation of the lanthanide tag signal with the miRNA concentration fitted well in a linear model in the range of 50-1000 pmol L-1 (miRNA-21) and 50-2000 pmol L-1 (miRNA-155 and miRNA-10b). The limits of detection for three miRNAs were 11-20 pmol L-1, with the relative standard deviations of 2.2-2.7%. The recoveries of target miRNAs in the human serum and HepG-2 cells were in the range of 87.2-111% and 93.3-111%, respectively. Overall, the method is ideal for the simultaneous quantification of multiple miRNAs with advantages of low spectral interference, high sensitivity, good selectivity, and strong resistance to the complex matrix.

Inductively coupled plasma mass spectrometry (ICP-MS) has emerged as a promising analytical platform for the quantification of biomolecules using elemental tags; however, absolute quantification at extremely low concentrations by ICP-MS without a calibration curve remains challenging. Here, we developed a digital loop-mediated isothermal amplification (LAMP) assay for counting hepatitis B virus (HBV) DNA using single-particle (sp) ICP-MS. The sample and LAMP reagents were mixed and encapsulated in agarose droplets, which were generated by homemade centrifugal droplet generators. The agarose droplets were incubated at 65 °C for amplifying the virus DNA with LAMP primers and then cooled to 4 °C for generating "gel" particles during the temperature-dependent "sol-gel" transition. The LAMP amplicons were intercalated into the agarose particles using polyacrylamide-modified LAMP primers, enabling the labeling of dsDNA with [Ru(bpy)

Therapeutic drug monitoring is central to optimize therapeutic efficacy and minimize adverse events; however, the pharmacokinetics and pharmacodynamics of most drugs differ greatly among individuals. Evaluation of the therapeutic response is in urgent need to help clinician predict the clinical dose of drug. Herein, we described an analytical assay using gold nanocluster (AuNC)-decorated metal-organic frameworks (MOFs) for targeted drug delivery and monitoring pharmacodynamics, giving attractive options for studying individualized therapy. The camptothecin (Cam) anticancer drug was caged in the NH

Time-resolved (TRA)-ICPMS has become a booming subfield of single-cell analysis tools in recent years, while generation of single cells remains the major challenge. Microfluidic devices reveal their great capability and potential in encapsulation of single cells into water droplets. However, current strategies to pinch off droplets require a specific oil phase, which is not compatible to conventional ICPMS and makes the signal of cells in the water phase susceptible. Herein, we built a 3D water-in-gas microfluidic device (3D W/G MFD) with commercially available components, producing single cell droplet enclosed by argon gas. By simply tuning the flow rate of gas and water, the droplets were generated to encapsulate single cells, which significantly reduced the probability of the single signal coming from multiple cells by 1 or 2 orders of magnitude compared to direct injection. The developed oil-free 3D W/G MFD was more friendly to online coupling with TRA-ICPMS than water-in-oil devices. The effect of Cd2+ on HepG2 cells was studied by single cell detecting total Zn with 3D W/G MFD-TRA-ICPMS, and the variation of labile Zn was explored by flow cytometry with an N-(6-methoxy-8-quinolyl)-p-toluenesulfonamide probe. To the best of our knowledge, this work pioneered the exploration of variation in cellular metal content and speciation at the single-cell level, compensating for the deficiency of speciation analysis based on TRA-ICPMS and providing new insights into exploring the complexity of biology.

Inductively coupled plasma mass spectrometry (ICP-MS) combined with element tags has been well designed and extensively applied in cell enumeration. It possesses superior quantitative capability, strong resistance to matrix interference, multiplex detection capability but destructive characteristic. Herein, we constructed an ICP-MS based multifunctional platform for capture, nondestructive enumeration, and release of circulating tumor cells (CTCs). Aptamer on capture probe recognized Mucin 1 (MUC1) on membrane of MCF-7 cells specifically, thus the cells were captured by probe and the Initiator originally hybridized with Aptamer was substituted by MUC1 and released into solution. Then the released Initiator was separated from the captured cells and hybridized with Tb labeled Substrate on detection probe to release a large amount of nicked Tb fragments through the nicking endonuclease assisted amplification for subsequent ICP-MS detection. Meanwhile, cells captured by probe were released by nuclease digestion for further reculture. Such a strategy effectively avoids CTCs destruction resulted from ICP-MS enumeration, increases the detection sensitivity of ICP-MS by involving nicking endonuclease assisted amplification, and realizes cell recovery for further analysis. A limit of detection of 87 MCF-7 cells and a linear range of 250-10 000 MCF-7 cells were realized for ICP-MS enumeration. A cell recovery of 52.7% (with capture and release efficiency of 63.9 and 82.5%, respectively) and a viability of 74.3% were obtained, meanwhile the released cells exhibited strong proliferation ability. This multifunctional platform for CTCs capture, enumeration, and release has great applicable potential in early diagnosis and individual treatment for cancer.

Development of multimodal detection technologies for accurate diagnosis of cancer at early stages is in great demand. In this work, we report a novel approach using an aptamer-based dual-functional probe for rapid, sensitive, and specific counting and visualization of MCF-7 cells by inductively coupled plasma–mass spectrometry (ICP-MS) and fluorescence imaging. The probe consists of a recognition unit of aptamer to catch cancer cells specifically, a fluorescent dye (FAM) moiety for fluorescence resonance energy transfer (FRET)-based “off-on” fluorescence imaging as well as gold nanoparticles (Au NPs) tag for both ICP-MS quantification and fluorescence quenching. Due to the signal amplification effect and low spectral interference of Au NPs in ICP-MS, an excellent linearity and sensitivity were achieved. Accordingly, a limit of detection of 81 MCF-7 cells and a relative standard deviation of 5.6% (800 cells, n = 7) were obtained. The dynamic linear range was 2 × 102 to 1.2 × 104 cells, and the recoveries i...

Trace heavy metals have great impact on biological system; therefore, it is essential to develop suitable analytical methods for the determination of trace heavy metals in biological samples to elucidate their biochemical and physiological functions in organisms. Herein, we presented a chip-based array monolithic microextraction system and combined it with inductively coupled plasma mass spectrometry (ICPMS) for online analysis of trace Hg, Pb, and Bi in real-world biological samples. Six ethylenediamine modified poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) (poly(GMA-co-EDMA-NH2)) capillary monolithic columns were embedded parallelly in microchannels of a microfluidic chip for array monolithic microextraction. Various parameters affecting the chip-based array monolithic microextraction of target metals were investigated. The sample throughput of the proposed method was 16 h–1, with the limits of detection for Hg, Pb, and Bi of 23, 12, and 13 ng L–1, respectively. The developed method was ...

Single cell analysis is a significant research field in recent years reflecting the heterogeneity of cells in a biological system. In this work, a facile droplet chip was fabricated and online combined with time-resolved inductively coupled plasma mass spectrometry (ICPMS) via a microflow nebulizer for the determination of zinc in single HepG2 cells. On the focusing geometric designed PDMS microfluidic chip, the aqueous cell suspension was ejected and divided by hexanol to generate droplets. The droplets encapsulated single cells remain intact during the transportation into ICP for subsequent detection. Under the optimized conditions, the frequency of droplet generation is 3-6 × 106 min-1, and the injected cell number is 2500 min-1, which can ensure the single cell encapsulation. ZnO nanoparticles (NPs) were used for the quantification of zinc in single cells, and the accuracy was validated by conventional acid digestion-ICPMS method. The ZnO NPs incubated HepG2 cells were analyzed as model samples, and the results exhibit the heterogeneity of HepG2 cells in the uptake/adsorption of ZnO NPs. The developed online droplet-chip-ICPMS analysis system achieves stable single cell encapsulation and has high throughput for single cell analysis. It has the potential in monitoring the content as well as distribution of trace elements/NPs at the single cell level.

We report a sensitive, selective, simple, and reliable magnetic immunoassay protocol for detection and imaging of HepG2 cells. After being captured by Cs-doped multicore magnetic nanoparticles (MMNPs), HepG2 cells were labeled by CdSe/ZnS quantum dots (QDs), which could be visualized by fluorescence imaging using the photoluminescence property of QDs, and subsequently, they can be counted by inductively coupled plasma mass spectrometry (ICP-MS) with Cd/Cs as elemental tag. Because of the superior photoluminescence properties and the large quantities of detectable Cd atoms contained in the QDs core, QDs play a dual function role in this assay, making the method easier and more comprehensive than other similar approaches. Under the optimal conditions, the limit of detection of 61 HepG2 cells and the relative standard deviation of 5.4% (800 HepG2 cells, n = 7) were obtained. The linear range was 200-30 000 cells, and the recoveries in human whole blood were in the range of 86-104%. The proposed method enables us not only to count but also to see the cancer cells with the same labeling process, opening a promising avenue for research and clinical application.

More recently, single-cell analysis based on ICPMS has made considerable headway while a challenge remains to differentiate single cell from doublets during the analysis. One burgeoning solution is to encapsulate single cell into droplets on the platform of the microfluidic chip. However, the manufacture of the droplet-based microfluidic chip requires sophisticated fabrication and limits its potential application. In this paper, we presented an off-the-shelf three-dimensional (3D) microfluidic device by assembling commercially available parts without any proficient manufacturing process. Uniform monodisperse microdroplet was generated from the 3D microfluidic device with a size variation of 1.5%, and the innner diameter of the 3D microfluidic device was the same as the nebulizer (150 μm). The proposed 3D microfluidic device-time-resolved ICPMS system was applied to detect silver in single AgNPs (51 nm), and the result is in good agreement with conventional acid digestion method, demonstrating the accuracy of the method. Silver uptake behaviors in HepG2 cells were then studied by incubating with Ag

Trace mercury speciation in cells is critical to understand its cytotoxicity and cell protection mechanism. In this work, we fabricated a chip-based magnetic solid-phase microextraction (MSPME) system, integrating a cell lysis unit as well as a sample extraction unit, and online combined it with micro high-performance liquid chromatography (microHPLC)-inductively coupled plasma mass spectrometry (ICPMS) for the speciation of mercury in HepG2 cells. Magnetic nanoparticles with sulfhydryl functional group were synthesized and self-assembled in the microchannels for the preconcentration of mercury species in cells under an external magnetic field. The enrichment factors are ca. 10-fold, and the recoveries for the spiked samples are in the range of 98.3-106.5%. The developed method was used to analyze target mercury species in Hg(2+) or MeHg(+) incubated HepG2 cells. The results demonstrated that MeHg(+) entered into the HepG2 cells more easily than Hg(2+), and part of the MeHg(+) might demethylate into Hg(2+) in HepG2 cells. Besides, comprehensive speciation of mercury in incubated cells revealed different detoxification mechanisms of Hg(2+) and MeHg(+) in Hg(2+) or MeHg(+) incubated HepG2 cells.

The issue of quantifying trace metals in cells has drawn widespread attention but is threatened with insufficient sensitivity of the instruments, complex cellular matrix and limited cell consumption. In this study, microfluidic droplet-based liquid phase microextraction (LPME), as a miniaturized platform, was developed and combined with electrothermal vaporization (ETV)-inductively coupled plasma mass spectrometry (ICPMS) for the analysis of trace Cd, Hg, Pb, and Bi in cells. A novel and facile design of phase separation region was proposed, which made the phase separation very easily for subsequent ETV-ICPMS detection. Mechanism of the phase separation was carefully discussed using the incompressible formulation of the Navier-Stokes equations. The developed microfluidic droplet-based LPME system exhibited much higher extraction efficiency to target metals than microfluidic stratified flow-based LPME. Under the optimized conditions, the limits of detection of the proposed microfluidic droplet-based LPME-ETV-ICPMS system were 2.5, 3.9, 5.5, and 3.4 ng L

In this work, a novel method of TiO2 nanoparticles (NPs) functionalized monolithic capillary microextraction (CME) online coupling with inductively coupled plasma mass spectrometry (ICPMS) was developed for the sequential determination of Gd3+ and Gd-based contrast agents in human urine samples. The monolithic capillary was prepared by embedding anatase TiO2 NPS in the poly(methacrylic acid-ethylene glycol dimethacrylate) (MAA-EDMA) framework. The Gd3+ and Gd-based contrast agents (such as gadolinium-diethylene triamine pentaacetic acid (Gd-DTPA) and Gd-DTPA-bismethylamide (Gd-DTPA-BMA)) display different adsorption behaviors on the prepared monolithic capillary which possesses the adsorption properties of both anatase TiO2 NPS and poly(MAA-EDMA) monolith. Under the optimized conditions, the limits of detection (LODs) were found to be 3.6, 3.2, and 4.5 ng L–1 for Gd3+, Gd-DTPA, and Gd-DTPA-BMA, respectively, which are the lowest up to date. The enrichment factor was 25-fold with the sample throughput of 5...

In this study, the hydrophilic polymer monolithic capillary (poly(acrylamide-vinylpyridine-methylene bis(acrylamide)), poly(AA-VP-Bis)) was prepared for the separation and enrichment of carboxyl group-containing gold nanoparticles (Au NPs) from environmental waters followed by online ICPMS determination. The extraction mechanism of the prepared poly(AA-VP-Bis) monolithic capillary for Au NPs is based on the static electrical and hydrogen bond interactions between the carboxyl group on the surface of Au NPs and pyridine/amide groups on the surface of the monolith. Under the optimal conditions, a detection limit of 24.2 fmol L(-1) and a sample throughput of 6 h(-1) were achieved for 3 nm citrate stabilized Au NPs, and the original morphology of the Au NPs could be maintained during the extraction process. The developed method was successfully applied for the analysis of carboxyl group-containing Au NPs in environmental water samples, such as tap water, the Yangtze River water, and the East Lake water, with recoveries in the range of 77-103%. Compared with the reported approaches for analysis of Au NPs, this method is an online strategy for carboxyl group-containing Au NPs determination and has the merits of low detection limit, small sample consumption, fast extraction/desorption kinetics, wide linear range, high selectivity, and high throughput.

An online hydrophilic polymer monolithic capillary microextraction (CME)-inductively coupled plasma mass spectrometry (ICPMS) analytical system was developed for the size-based analysis of Au NPs in the range of 3-40 nm. Au NPs with different particle sizes retained on the poly(acrylamide-vinylpyridine-methylene bis(acrylamide)) (poly(AA-VP-Bis)) monolithic capillary showed different elution behavior when cysteamine was used as the eluent, and the napierian logarithm of the critical eluent concentration (Ln C (cysteamine)) was linearly dependent on the particle size of Au NPs. This means that the unknown particle size of Au NPs can be deduced based on their critical eluent concentrations. The developed method was successfully used for the baseline separation of 3 and 20 nm Au NPs, as well as 10 and 30 nm Au NPs. Compared with chromatographic-based methods for the size analysis of Au NPs, the developed online poly(AA-VP-Bis) monolithic CME-ICPMS method is featured with simultaneous separation and enrichment of Au NPs, simple operation, low cost, high analytical speed, and high adsorption capacity.

This work reports an efficient, specific, and sensitive immunoassay protocol for detection of tumor cells by using inductively coupled plasma mass spectrometry (ICP-MS) with two probes. Magnetic nanobeads modified with anti-CD3 were used as capture probes for efficient and fast magnetic separation of Jurkat T cells from a mixture of cells, and gold nanoparticles (Au NPs) conjugated with anti-CD2 were used as detection probes for ICP-MS measurement. The capture and detection probes target the Jurkat T cells with high affinity and specificity, while they do not target other CD2/CD3-negative cells such as 97L cells and A549 cells. On the basis of these results, we proposed a new immunoassay for specific detection of Jurkat T cells. The conditions for this immunoassay were carefully optimized, including the incubation time and temperature, the concentration of the labeling probe, and the elution conditions. Under the optimized conditions, the linear range of 300-30,000 and the limit of detection of 86 Jurkat T cells were obtained, and the relative standard deviation for seven replicate detection of Jurkat T cells was 5.2% (3000 Jurkat T cells). This method has numerous advantages, including ease of preparation, low sample consumption, and high sensitivity and selectivity. Importantly, the methodology could be extended to the simultaneous detection of other cells based on their cellular biomarkers.