Search

The precise transportation of small-volume liquids in microfluidic and nanofluidic systems remains a challenge for many applications, such as clinical fluidical analysis. Here, we present a reliable digital pump that utilizes acoustic streaming induced by localized fluid-substrate interactions. By locally generating streaming via a C-shaped interdigital transducer (IDT) within a triangle-edged microchannel, our acoustofluidic pump can generate a stable unidirectional flow (∼nanoliter per second flow rate) with a precise digital regulation (∼second response time), and it is capable of handling aqueous solutions (e.g., PBS buffer) as well as high viscosity liquids (e.g., human blood) with a nanoliter-scale volume. Along with our acoustofluidic pump's low cost, programmability, and capacity to control small-volumes at high precision, it could be widely used for point-of-care diagnostics, precise drug delivery, and fundamental biomedical research.

Asparagine deamidation in the complementarity determining regions of recombinant monoclonal antibodies has been extensively studied and shown to have a negative impact on antigen binding. Those asparagine residues are typically exposed and thus have a higher tendency toward deamidation, depending also on local structure and environmental factors such as temperature and pH. Deamidation rates and products of a susceptible asparagine residue in the complementarity determining regions of a recombinant monoclonal antibody free in solution or in the antibody-antigen complex were studied. The results demonstrated that incubation of the antibody or its antigen complex generated a similar amount of aspartate. The expected amount of isoaspartate product was detected in free antibody, but it was completely lacking in the antibody-antigen complex.

Charge variants, especially acidic charge variants, of recombinant monoclonal antibodies have been challenging to fully characterize despite the fact that several posttranslational modifications have already been identified. The acidic species of a recombinant monoclonal antibody were collected using weak cation exchange (WCX)-10 chromatography and characterized by LC-MS at multiple levels. In this study, methionine oxidation and asparagine deamidation are the only two modifications identified in the acidic species. Incubation of the collected main chromatographic peak with hydrogen peroxide generated acidic species, which confirmed that acidic species were enriched in oxidized antibody. Differences observed between the original acidic species and the oxidization-induced acidic species indicate that different mechanisms are involved in the formation of acidic species. Additionally, acidic species were generated by thermal stress of the collected main peak from the original sample. Thermal stress of the collected main peak in pH 9 buffer or ammonium bicarbonate generated chromatograms that are highly similar to those from the analysis of the original molecule. LC-MS analysis identified oxidation of the same methionine residue and deamidation of the same asparagine in the corresponding acidic fractions generated by thermal stress; however, relatively lower levels of methionine oxidation and higher levels of asparagine deamdiation were observed. The results support the use of stressed conditions to generate low abundance species for detailed characterization of recombinant monoclonal antibody charge variants, but with caution.

Methionine (Met) oxidation is a major modification of proteins, which converts Met to Met sulfoxide as the common product. It is challenging to determine the level of Met sulfoxide, because it can be generated during sample preparation and analysis as an artifact. To determine the level of Met sulfoxide in proteins accurately, an isotope labeling and LC-MS peptide mapping method was developed. Met residues in proteins were fully oxidized using hydrogen peroxide enriched with (18)O atoms before sample preparation. Therefore, it was impossible to generate Met sulfoxide as an artifact during sample preparation. The molecular weight difference of 2 Da between Met sulfoxide with the (16)O atom and Met sulfoxide with the (18)O atom was used to differentiate and calculate the level of Met sulfoxide in the sample originally. Using a recombinant monoclonal antibody as a model protein, much lower levels of Met sulfoxide were detected for the two susceptible Met residues with this new method compared to a typical peptide mapping procedure. The results demonstrated efficient elimination of the analytical artifact during LC-MS peptide mapping for the measurement of Met sulfoxide. This method can thus be used when accurate determination of the level of Met sulfoxide is critical.

A recombinant monoclonal antibody with trisulfide bonds and cysteinylation was thoroughly characterized in the current study. Trisulfide bonds and cysteinylation were first detected when the recombinant monoclonal antibody was analyzed by LC-MS to determine the molecular weights of the intact antibody and its F(ab')2 fragment generated from IdeS digestion. LC-MS analysis of nonreduced tryptic peptides indicated trisulfide bonds are associated with the interchain disulfide bonds of both A isoform and A/B isoform and cysteinylation is associated only with the A isoform. A low percentage of trisulfide bonds was detected in between the light chain and heavy chain disulfide bond of the A and A/B forms. While the majority of trisulfide bonds and cysteinylation is associated with the hinge region peptide that involves the four closely spaced cysteine residues of the heavy chain. The locations of trisulfide bond and cysteinylation were determined using a combination of Edman sequencing and LC-MS. In the A isoform, the major site of the trisulfide bond and cysteinylation is between the first disulfide bond in the hinge region. In the A/B isoform, the trisulfide was also located in between the disulfide bond that is formed by the second pair of cysteine residues.

One of the basic structural features of human IgG1 is the arrangement of the disulfide bond structure, 4 inter chain disulfide bonds in the hinge region and 12 intra chain disulfide bonds associated with twelve individual domains. Disulfide bond structure is critical for the structure, stability, and biological functions of IgG molecules. It has been known that inter chain disulfide bonds are more susceptible to reduction than intra chain disulfide bonds. However, a complete ranking of the susceptibility of disulfide bonds in IgG1 molecules is lacking. A method including reduction, differential alkylation, and liquid chromatography-mass spectrometry (LC-MS) analysis was developed and employed to investigate the complete ranking order of the susceptibility of disulfide bonds in two recombinant monoclonal antibodies. The results confirmed that inter chain disulfide bonds were more susceptible than intra chain disulfide bonds. In addition, it was observed that the disulfide bonds between the light chain and heavy chain were more susceptible than disulfide bonds between the two heavy chains. The upper disulfide bond of the two inter heavy chain disulfide bonds was more susceptible than the lower one. Furthermore, disulfide bonds in the CH2 domain were the most susceptible to reduction. Disulfide bonds in VL, CL, VH, and CH1 domains had similar and moderate susceptibility, while disulfide bonds in the CH3 domain were the least susceptible to reduction. Interestingly, a difference between IgG1kappa and IgG1lambda was also observed. The difference in the susceptibility of inter light heavy chain disulfide bonds and inter heavy chain disulfide bonds was smaller in IgG1kappa than in IgG1lambda. The intra chain disulfide bonds in the Fab region of IgG1kappa were also less susceptible than disulfide bonds in the Fab region of IgG1lambda.

A low percentage of free sulfhydryl is a common feature of recombinant monoclonal antibodies although, in theory, all cysteine residues should be involved in disulfide bonds. A differential alkylation method was developed to determine the percentage of free sulfhydryl at each cysteine residue of four recombinant monoclonal antibodies. Free sulfhydryl was first alkylated with 12C iodoacetic acid. Free sulfhydryl, resulting from the reduction of disulfide bonds, was then alkylated with 13C iodoacetic acid. Cysteine containing peptides that were modified by 13C iodoacetic acid showed a molecular weight that was 2 Da higher than the same peptide that was modified by 12C iodoacetic acid. Peptides, containing the same cysteine residues that were modified with both alkylation reagents, coeluted on reversed-phase chromatography. Analysis by mass spectrometry resulted in two partially overlapped m/z series for each cysteine containing peptide, corresponding to modification by iodoacetic acid with 12C or 13C. The percentage of free sulfhydryl was then calculated using the two m/z series at each cysteine site. A low percentage of free sulfhydryl was detected at every cysteine residue in the four antibodies studied. Although different antibodies contained different levels of free sulfhydryl, similar distribution of free sulfhydryl in the domain structures was observed in the four antibodies.

Oligosaccharides are critical for structural integrity, stability, and biological functions of recombinant monoclonal antibodies. It is relatively easy to characterize, quantify, and determine the impact of major glycoforms. While challenging to detect and quantify, certain low abundance oligosaccharides are highly relevant to the stability and functions of recombinant monoclonal antibodies. Methods were established in this study based on enzymatic digestion to consolidate peaks of the same type of oligosaccharides by removing heterogeneity and thus increase detectability of low abundance peaks. Endo H was used to collapse high mannose oligosaccharides to a single peak of GlcNAc for ease of detection and quantitation. β-Galactosidase and β-N-acetylhexosaminidase were used to convert complex oligosaccharides into two peaks containing either GlcNAc2Man3Fuc or GlcNAc2Man3, which simplified the chromatograms and data analysis. More importantly, low abundance hybrid oligosaccharides can only be detected and qualified after β-galactosidase and β-N-acetylhexosaminidase digestion. Detection and quantitation of low abundance oligosaccharides can also be achieved using a combination of all three enzymes. These methods can be applied to the development of recombinant monoclonal antibody therapeutics.

The sites and levels of Asn deamidation in proteins are often determined by LC-MS analysis of peptides obtained from enzymatic digestion. However, deamidation that occurs during sample preparation steps results in overestimation of the original level of deamidation. The inherent deamidation and those introduced by sample preparation can be differentiated by preparing samples in (18)O water. When using H(2)(18)O, the formation of isoAsp and Asp by Asn deamidation during sample preparation results in a molecular weight increase of 3 Da due to the incorporation of the (18)O atom to the side chains of isoAsp or Asp; in contrast, inherent deamidation only results in a molecular weight increase of 1 Da. In addition, up to two (18)O atoms can also be incorporated into the peptide C-terminal carboxyl group during enzymatic digestion. Therefore, the 2 Da molecular weight difference at the deamidation sites can only be used to differentiate deamidation that occurs prior to or during sample preparation under conditions that a fixed number of (18)O atoms are incorporated into the peptide C-terminal carboxyl groups. Otherwise, it is challenging to apply this procedure because of the resulting complicated isotopic distributions. Here, a new procedure of using (18)O-water for sample preparation coupled with tandem mass spectrometry (MS/MS) was established to calculate the deamidation artifacts. In this method, b ions were used for the calculation of Asn deamidation that occurred prior to or during sample preparation, which eliminated the complicated factor of various number of (18)O-atoms to the peptide carboxyl groups. This procedure has the potential to be applied under the general peptide mapping conditions.

Glycosylation is a common posttranslational modification and a key quality attribute of recombinant monoclonal antibodies. In particular, the level of core-fucosylation is critical to several Fc mediated biological functions. However, it is challenging to accurately determine the level of afucosylation due to its low level and possible distribution in multiple oligosaccharide species. Methods that can accurately determine the level of afucosylation were developed in the current study. Digestion of monoclonal antibodies with Endoglycosidases F2 and H, which cleave the glycosidic bond between the two primary GlcNAc residues, reduced complicated oligosaccharide population into two groups with either only GlcNAc or GlcNAc and the core-fucose residue. Analysis of the digested antibodies by LC-MS provided a quick estimate of the level of afucosylation. Alternatively, PNGaseF released oligosaccharides were labeled with 2-aminobenzamide, digested with Endoglycosidases F2 and H followed by normal phase HPLC with fluorescence detection. The results demonstrated that the latter method can provide an accurate quantitation of the level of afucosylation.

Each human IgG1 antibody contains a total of thirty-two cysteine residues. In theory, all of them are involved in disulfide bonds, and no free sulfhydryl should be detected. However, literature has suggested that the presence of low levels of free sulfhydryl groups is likely a common feature of recombinant and wild type IgG1 antibodies. Currently, there is little information correlating the presence of free sulfhydryl to specific cysteine residues. The presence of free sulfhydryl groups in five recombinant monoclonal antibodies and their locations were further investigated in the current study. Free sulfhydryl groups were first modified using 5-idoacetamidofluorescein (5-IAF), which was followed by reduction of disulfide bonds and alkylation with iodoacetic acid (IAA). This procedure allowed differentiation of free cysteine residues from cysteine residues that were involved in disulfide bonding. In addition, it allowed a sensitive fluorescence detection of peptides with free sulfhydryl groups. The locations of the free sulfhydryl groups were determined using mass spectrometry after fraction collection. The results indicated that different antibodies had different levels of free sulfhydryl due to multiple unpaired cysteine residues commonly in the constant domains. Furthermore, free sulfhydryl due to unpaired cysteine residues in the variable domains varied for different antibodies. Interestingly, free sulfhydryl was rarely associated with cysteine residues that were involved in interchain disulfide bonds.