Search

In this work, a three-dimensional (3D) printed microdevice was designed to fix a drop of extractant that was applied to the enrichment of the most toxic biogenic amine, histamine, by headspace single-drop microextraction (HS-SDME). Concomitantly, based on the hybridization chain reaction of the histamine aptamer isothermal nucleic acid amplification strategy, a new fluorescence sensing method was developed to realize the highly sensitive detection of histamine. This is the first application of a 3D-printed microdevice to realize the HS-SDME process, which, among other advantages, effectively solves the problem of unstable and variable drop volumes that can plague traditional SDME and ensures the accuracy and repeatability of the extraction process. The calibration linear range of this SDME-fluorescence method was from 10 pM to 5 μM (R

In order to solve the problem of difficult separation of various biogenic amines (BAs), which have similar structures or very different polarities, in gentamicin, by conventional liquid chromatography, a new ultrahigh-performance supercritical fluid chromatography (UHPSFC) method was developed. In this method, 10 BAs were derivatized precolumn using dansyl chloride and separated using a UHPSFC system. By computational simulation, complete separation of 10 BAs was successfully achieved. Detection was performed using a photodiode array (PDA) and single-quadrupole mass spectrometry (MS) together with electrospray ionization (ESI). A wide linear range (10-2500 ng/mL) was achieved, with the limits of detection (LODs) between 1.2 and 10.0 ng/mL and the limits of quantification (LOQs) between 5.0 and 25.0 ng/mL. Apart from high sensitivity, this UHPSFC-PDA/ESI-MS detection method also displayed high accuracy, the matrix effect was reduced by an appreciable extent, and the recovery rates of the 10 BAs were between 84.1 and 117.1%. For comparison, high-performance liquid chromatography-tandem mass spectrometry (MS/MS) was also used for the detection of underivatized BAs in gentamicin, showing good linearity and high sensitivity (LODs from 0.05 to 1.00 ng/mL and LOQs from 1.00 to 12.50 ng/mL) for all BAs except for spermine and spermidine. Although single-quadrupole MS is inferior to MS/MS in terms of sensitivity, the UHPSFC method could detect more BAs. It also achieved the quantification limits required for impurity determination, demonstrating a potential strategy to offer a map overview of possible BA presence in fermentation antibiotics.

Remarkable progresses have been made in electrochemical monitoring of living cells based on one-dimensional (1D) or two-dimensional (2D) sensors, but the cells cultured on 2D substrate under these circumstances are departed from their three-dimensional (3D) microenvironments in vivo. Significant advances have been made in developing 3D culture scaffolds to simulate the 3D microenvironment yet most of them are insulated, which greatly restricts their application in electrochemical sensing. Herein, we propose a versatile strategy to endow 3D insulated culture scaffolds with electrochemical performance while granting their biocompatibility through conductive polymer coating. More specifically, 3D polydimethylsiloxane scaffold is uniformly coated by poly(3,4-ethylenedioxythiophene) and further modified by platinum nanoparticles. The integrated 3D device demonstrates desirable biocompatibility for long-term 3D cell culture and excellent electrocatalytic ability for electrochemical sensing. This allows real-time monitoring of reactive oxygen species release from cancer cells induced by a novel potential anticancer drug and reveals its promising application in cancer treatment. This work provides a new idea to construct 3D multifunctional electrochemical sensors, which will be of great significance for physiological and pathological research.

Current achievements on electrochemical monitoring of cells are often gained on two-dimensional (2D) substrates, which fail in mimicking the cellular environments and accurately reproducing the cellular functions within a three-dimensional (3D) tissue. In this regard, 3D scaffold concurrently integrated with the function of cell culture and electrochemical sensing is conceivably a promising platform to monitor cells in real time under their in vivo-like 3D microenvironments. However, it is particularly challenging to construct such a multifunctional scaffold platform. Herein, we developed a 3-aminophenylboronic acid (APBA) functionalized graphene foam (GF) network, which combines the biomimetic property of APBA with the mechanical and electrochemical properties of GF. Hence, the GF network can serve as a 3D scaffold to culture cells for a long period with high viability and simultaneously as an electrode for highly sensitive electrochemical sensing. This allows monitoring of gaseous messengers H2S release...

We report a bipolar electrode (BPE) sensing platform for the temporal detection of cancer cells. Combining the advantages of anodic dissolution and electrochemiluminescence (ECL), this strategy shows an ultralow detection limit down to 5 cells/cm(2). At the anode working as the reporting pole, Au NPs were assembled through DNA double strand, which served as both catalyzer for the ECL reaction of luminol/H2O2 and seeds for the chemical reduction of Ag, the anodic dissolution probe. The duration of Ag layer dissolution was positively correlated with the amount of Ag but negatively related to the controlled potential and the conductivity of the circuit. Therefore, it was possible to amplify a slight conductivity change through tuning the other two factors. As the formation of Ag@Au completely quenched the ECL emission of luminol, the ECL emission recovery reflected the extent of anodic dissolution. Through monitoring the ECL recovery time before and after the incubation of cells on the cathode, a few number of cells could be quantified due to slight difference of the conductivity. This method shows several merits. First, the combination of anodic dissolution and ECL significantly increases the detection sensitivity of BPE device. In addition, this strategy broadens the application of BPE for the ultrasensitive monitoring of cancer cells, which was applied to investigate the capture efficiencies of antibodies and aptamers toward MCF-7 and A549.

Semiconductor nanocrystals usually suffer from weak electrogenerated chemiluminescence (ECL) emissions compared with conventional organic emitters. In this work, we propose, for the first time, a very convenient but effective way to greatly enhance ECL emission of semiconductor TiO2 nanotubes (NTs) by H2O2 and K2S2O8 as dual coreactants, generating ECL emission ca. 6.3 and 107 times stronger than that of K2S2O8 or H2O2 as an individual coreactant, respectively. Scanning electron microscopy, X-ray diffraction, and electron paramagnetic resonance spectral studies were carried out to investigate the ECL enhancement mechanism. The ECL enhancement of TiO2 NTs by the K2S2O8-H2O2 system was supposed to originate from the coordination of H2O2 to the TiO2 surface and the synergy effect between H2O2 and K2S2O8 in the ECL process. The coordination of H2O2 to the surface of TiO2 could stabilize the electrogenerated coreactant-related radical OH(•) (hydroxyl radical), which could obviously promote the amount of sulfate radical anion (SO4(•-)) near the electrode surface by inducing decomposition of K2S2O8 into SO4(•-) or inhibiting the consumption of SO4(•-) by its reaction with H2O. The holes (h(+)) released from SO4(•-) were injected into the valence band of TiO2, resulting in more TiO2(+), which combined with the electrons coming from the conduction band with an enhanced light emission. Moreover, this enhancement effect was also applicable to ECL of a CdS nanocrystal film on a glass carbon electrode, with ca. 2.74- and 148.3-fold enhanced ECL intensity correspondingly, indicating wide applications in the development of semiconductor nanocrystal-based ECL biosensors.

This paper describes a novel electrochemiluminescence (ECL) imaging platform for simultaneous detection of cancer biomarkers based on a closed bipolar electrode (BPE) array. It consists of two separated channel arrays: detection channel array and sensing channel array, which are connected by a group of parallel ITO BPEs on a glass substrate. Besides, two parallel ITO strips are fabricated at the two sides of BPE array and employed as driving electrodes. After Au films are electrochemically deposited on the cathodes of the BPE array, nanobioprobes including biorecognition elements (aptamer or antibody) and a novel electrochemical tag, which is synthesized by doping thionine in silica nanoparticles (Th@SiO2 NPs), are introduced into the cathodes by immunoreaction or DNA hybridization. The Th@SiO2 coupled nanobioprobes as both recognition probes and signal amplification indicators could mediate the ECL signals of Ru(bpy)3(2+)/tripropylamine (TPA) on the anodes of BPE array through faradaic reaction due to the charge neutrality of BPE. Thus, multiplex detection of cancer biomarkers (adenosine triphosphate (ATP), prostate-specific antigen (PSA), α-fetoprotein (AFP) and thrombin) is realized by forming specific sensing interfaces onto the cathodic poles of BPEs in different sensing channels and reported by the ECL images of the Ru(bpy)3(2+)/TPA system on the anodic poles of BPEs in detection channels. The results demonstrate that this visual ECL platform enables sensitive detection with excellent reproducibility, which may open a new door toward the development of simple, sensitive, cost-effective, and high throughput detection methods on biochips.

Investigations of complex metabolic mechanisms and networks have become a focus of research in the postgenomic area, thereby creating an increasing demand for sophisticated analytical approaches. One such tool is lipidomics analysis that provides, a detailed picture of the lipid composition of a system at a given time. Introducing stable isotopes into the studied system can additionally provide information on the synthesis, transformation and degradation of individual lipid species. However, capturing the entire dynamics of lipid networks is still a challenge. We developed and evaluated a novel strategy for the in-depth analysis of the dynamics of lipid metabolism with the capacity for high molecular specificity and network coverage. The general workflow consists of stable isotope-labeling experiments, ultrahigh-performance liquid chromatography (UHPLC)/high-resolution Orbitrap-mass spectrometry (MS) lipid profiling and data processing by a software tool for global isotopomer filtering and matching. As a proof of concept, this approach was applied to the network-wide mapping of dynamic lipid metabolism in primary human skeletal muscle cells cultured for 4, 12, and 24 h with [U-(13)C]-palmitate. In the myocellular lipid extracts, 692 isotopomers were detected that could be assigned to 203 labeled lipid species spanning 12 lipid (sub)classes. Interestingly, some lipid classes showed high turnover rates but stable total amounts while the amount of others increased in the course of palmitate treatment. The novel strategy presented here has the potential to open new detailed insights into the dynamics of lipid metabolism that may lead to a better understanding of physiological mechanisms and metabolic perturbations.

This paper describes a novel on-chip microarray platform based on an electrochemiluminescence resonance energy transfer (ECL-RET) strategy for rapid assay of cancer cell surface biomarkers. This platform consists of 64 antigen-decorated CdS nanorod spots with the diameter of 1.0 cm uniformly distributed on 16 indium tin oxide (ITO) strips, which is coated with a multichannel decorated polydimethylsiloxane (PDMS) slice to realize multiplexed determination of antigens. To shorten the immune reaction time in the microchannels and simplify the device, magnetic stirring and four-channel universal serial bus (USB) ports for plug-and-play were used. When Ru(bpy)(3)(2+) labeled antibodies were selectively captured by the corresponding antigens on the CdS nanorod spot array, ECL-RET from the CdS nanorod (donor) by cathodic emission in the presence of K(2)S(2)O(8) to Ru(bpy)(3)(2+) (acceptor) occurred. With signal amplification of Ru(bpy)(3)(2+) and competitive immunoassay, carcinoembryonic antigen (CEA), α-fetoprotein (AFP), and prostate specific antigen (PSA) as models were detected on this microfluidic device via recording the increased ECL-RET signals on electrode surfaces. Furthermore, this multiplexed competitive immunoassay was successfully used for detecting cancer cell surface antigens via the specific antibody-cell interactions and cell counting via cell surface receptors and antigens on the CdS nanorod surface. This platform provides a rapid and simple but sensitive approach with microliter-level sample volume and holds great promise for multiplexed detection of antigens and antigen-specific cells.