Search

The research on oligosaccharides is growing and gaining in importance at a rapid pace. The efforts to understand their bioactivity and to develop new products based on oligosaccharides in biotherapeutics and food industry require effective and reliable tools for analysis of oligosaccharides. Here we present a dual electrolytic eluent generation platform for the analysis of oligosaccharides by high-performance anion-exchange liquid chromatography (HPAE) in both analytical and capillary column formats. The system consists of one eluent generator producing methanesulfonic acid (MSA) connected in series with a second eluent generator producing potassium hydroxide (KOH). Through manipulating the concentration output of both eluent generators, chromatographic performance comparable to that obtained using the conventional sodium acetate/sodium hydroxide (NaOAc/NaOH) eluents is achieved using the electrolytically generated potassium methanesulfonate/potassium hydroxide (KMSA/KOH) eluent. This platform utilizes deionized water as the only carrier stream through a single isocratic pump, overcomes the various drawbacks associated with manually prepared NaOAc/NaOH eluents, and offers an easy to use, simplified operation solution for oligosaccharides profiling with increased precision and accuracy.

Combining process analytical technology (PAT) with continuous production provides a powerful tool to observe and control monoclonal antibody (mAb) fermentation and purification processes. This work demonstrates on-line liquid chromatography (on-line LC) as a PAT tool for monitoring a continuous biologics process and forced degradation studies. Specifically, this work focused on ion exchange chromatography (IEX), which is a critical separation technique to detect charge variants. Product-related impurities, including charge variants, that impact function are classified as critical quality attributes (CQAs). First, we confirmed no significant differences were observed in the charge heterogeneity profile of a mAb through both at-line and on-line sampling and that the on-line method has the ability to rapidly detect changes in protein quality over time. The robustness and versatility of the PAT methods were tested by sampling from two purification locations in a continuous mAb process. The PAT IEX methods used with on-line LC were a weak cation exchange (WCX) separation and a newly developed shorter strong cation exchange (SCX) assay. Both methods provided similar results with the distribution of percent acidic, main, and basic species remaining unchanged over a 2 week period. Second, a forced degradation study showed an increase in acidic species and a decrease in basic species when sampled on-line over 7 days. These applications further strengthen the use of on-line LC to monitor CQAs of a mAb continuously with various PAT IEX analytical methods. Implementation of on-line IEX will enable faster decision making during process development and could potentially be applied to control in biomanufacturing.

Protein tyrosine nitration (PTN) is a signature hallmark of radical-induced nitrative stress in a wide range of pathophysiological conditions, with naturally occurring abundances at substoichiometric levels. In this present study, a fully automated four-dimensional platform, consisting of high-/low-pH reversed-phase dimensions with two additional complementary, strong anion (SAX) and cation exchange (SCX), chromatographic separation stages inserted in tandem, was implemented for the simultaneous mapping of endogenous nitrated tyrosine-containing peptides within the global proteomic context of a Macaca fascicularis cerebral ischemic stroke model. This integrated RP-SA(C)X-RP platform was initially benchmarked through proteomic analyses of Saccharomyces cerevisiae, revealing extended proteome and protein coverage. A total of 27 144 unique peptides from 3684 nonredundant proteins [1% global false discovery rate (FDR)] were identified from M. fascicularis cerebral cortex tissue. The inclusion of the S(A/C)X columns contributed to the increased detection of acidic, hydrophilic, and hydrophobic peptide populations; these separation features enabled the concomitant identification of 127 endogenous nitrated peptides and 137 transmembrane domain-containing peptides corresponding to integral membrane proteins, without the need for specific targeted enrichment strategies. The enhanced diversity of the peptide inventory obtained from the RP-SA(C)X-RP platform also improved analytical confidence in isobaric tags for relative and absolute quantitation (iTRAQ)-based proteomic analyses.

A new approach using a chromatography system equipped with isocratic pumps and an electrolytic eluent generator (EG) is introduced, replacing external pH gradient delivery using conventional gradient systems, in which bottled buffers with preadjusted pH are mixed using a gradient pump. The EG is capable of generating high purity base or acid required for online preparation of the buffer at the point of use, utilizing deionized water as the only carrier stream. Typically, the buffer was generated from online titration of a reagent composed of low molecular weight amines. The reagent was delivered isocratically into a static mixing tee, where it was titrated to the required pH with electrolytically generated base or acid. The required pH gradient was thus conveniently generated by electrically controlling the concentration of titrant. Also, since the pH was adjusted at the point of use, this approach offered enhanced throughput in terms of eluent preparation time and labor, and with a more reproducible pH profile. The performance of the system was demonstrated by running pH gradients ranging from pH 8.2 to 10.9 on a polymer monolith cation-exchange column for high throughput profiling of charge heterogeneity of intact, basic therapeutic monoclonal antibodies. A high degree of flexibility in modulating the key parameters of the pH gradient, including the buffer concentration, the pH gradient slope and the operating pH range was demonstrated. This enabled fine-tuning of the separation conditions for each individual antibody in order to enhance the chromatographic resolution.

We describe an approach to prepare an open tubular ion exchange (OTIE) column by coating a monolayer of anion exchange nanoparticle to a 16-20 μm bore polymethylmethacrylate (PMMA) capillary. The latex nanoparticle was electrostatically attached to carboxylate groups on the inner wall of capillary, pretreated with strong base for hydrolyzing the ester. Several approaches to nondestructively measure ion exchange capacities (IEC) of the columns were examined: (a) adsorption-desorption of an intensely fluorescent ion, e.g. fluorescein, and off-line fluorometry, (b) loading a weakly retained ion (e.g., IO3(-)), frontal displacement by a strongly bound ion (e.g., Cl(-)), and online optical or conductometric boundary detection, and (c) similar to the above except displacement being accompanied by reaction (e.g., acid-base titration). To our knowledge, this is the first time on-column titration has been used to measure capacities. By using different pH displacer solutions, we demonstrate for the first time the possibility of pKa-differentiated ion exchange capacity measurements. The cation exchange capacity of bare PMMA capillaries was on the order of 1 pequiv/mm(2) with little dependence on time and temperature of hydrolysis conditions. After AS18 latex coating, the strong base anion exchange capacity was on the order of 10 pequiv/mm(2), very close to what would be estimated on the basis of monolayer coverage of the surface by individual latex particles. The latex used contained a significant, additional amount of weak base character, about the same as the strong base ion exchange capacity.

In the biotechnology industry, ion-exchange chromatography is widely used for profiling the charge heterogeneity of proteins, including monoclonal antibodies. Ionic strength based ion exchange separations, while having excellent resolving power and robustness, are product specific and time-consuming to develop. In the present work, a pH gradient based separation using a cation exchange column is described and shown to be a multiproduct charge sensitive separation method for monoclonal antibodies. Simple mixtures of defined buffer components were used to generate the pH-gradients that separate closely related antibody species. The form of the pH gradient was controlled and optimized by the pump as well as the buffer composition if necessary. During this work, the buffer compositions for the separation were optimized in parallel for several MAbs. The data shows that the multiproduct method is optimal for all of the MAbs studied. Operational aspects of the separation such as column chemistry, column length, and sample matrix indicate a very robust method. The pH gradient ion-exchange method is demonstrated to have significant resolving power and peak capacities far in excess of what we would expect for ionic strength elution ion-exchange. Data obtained demonstrates that the separation is relatively insensitive to column length. Direct analysis (no buffer exchange) of samples in matrixes consistent with in-process manufacturing pools is demonstrated. Such a capability is extremely useful for the high throughput evaluation of in-process and final product samples.

A 150 microm internal diameter capillary monolithic column with a strong cation-exchange stationary phase was prepared by direct in situ polymerization of ethylene glycol methacrylate phosphate and bisacrylamide in a trinary porogenic solvent consisting dimethylsulfoxide, dodecanol, and N,N'-dimethylformamide. This phosphate monolithic column exhibits higher dynamic binding capacity, faster kinetic adsorption of peptides, and more than 10 times higher permeability than the column packed with commercially available strong cation-exchange particles. It was applied as a trap column in a nanoflow liquid chromatography-tandem mass spectrometry system for automated sample injection and online multidimensional separation. It was observed that the sample could be loaded at a flow rate as high as 40 microL/min with a back pressure of approximately 1300 psi and without compromising the separation efficiency. Because of its good orthogonality to the reversed phase separation mechanism, the phosphate monolithic trap column was coupled with a reversed-phase column for online multidimensional separation of 19 microg of the tryptic digest of yeast proteins. A total of 1522 distinct proteins were identified from 5608 unique peptides (total of 54,780 peptides) at the false positive rate only 0.46%.

It has been shown that oxidatively modified forms of proteins accumulate during oxidative stress, aging, and in some age-related diseases. One of the unique features of protein oxidation by a wide variety of routes is the generation of carbonyl groups. Of major interest in the study of oxidative stress diseases is which proteins in a proteome are being oxidized and the site(s) of oxidation. Based on the fact that proteins are generally characterized through tryptic peptide fragments, this paper reports a method for the isolation of oxidized peptides, which involves (1) derivatization of oxidized proteins with Girard P reagent (GRP; 1-(2-hydrazino-2-oxoethyl)pyridinium chloride), (2) following proteolysis enrichment of the derivatized peptide using strong cation exchange (SCX) chromatography, and (3) identification of oxidation sites using tandem mass spectrometry. Derivatization of aldehydes and ketones in oxidized proteins was accomplished by reacting protein carbonyls with the hydrazide of GRP. The resulting hydrazone bond was reduced by sodium cyanoborohydride to further stabilize the labeling. Derivatization time and concentrations of the derivatizing agent were optimized with model peptides. Oxidized transferrin was used as model protein to study derivatization efficiency at the protein level. Following metal-catalyzed oxidation of transferrin, the protein was derivatized with GRP and trypsin digested. Positively charged peptides were then selected from the digest with SCX chromatography at pH 6.0. Seven GRP-derivatized peptides were found to be selected from transferrin by MALDI-TOF-TOF analysis. Fourteen underivatized native peptides were also captured by the SCX column at pH 6.0. Mapping of the derivatized peptides onto the primary structure of transferrin indicated that the oxidation sites were all on solvent-accessible regions at the protein surface. Efficiency of the method was further demonstrated in the identification of oxidized proteins from yeast.

Because of health concerns surrounding widespread exposure to perchlorate, we developed a sensitive and selective method for quantifying perchlorate in human urine using ion chromatography coupled with electrospray ionization tandem mass spectrometry. Perchlorate was quantified using a stable isotope-labeled internal standard ((18)O(4)-perchlorate) with excellent assay precision (coefficient of variation <5% for repetitively analyzed quality control material). Analytical accuracy was established by blind analysis of certified proficiency testing materials prepared in synthetic urine matrix; calculated amounts deviated minimally from true amounts, with percent differences ranging from 2% to 5%. Selective chromatography and tandem mass spectrometry reduced the need for sample cleanup, resulting in a rugged and rapid method capable of routinely analyzing 75 samples/day. The lowest reportable level (0.025 ng/mL) was sufficiently sensitive to detect perchlorate in all human urine samples evaluated to date, with a linear response range from 0.025 to 100 ng/mL. This selective, sensitive, and rapid method will help elucidate any potential associations between human exposure to low levels of perchlorate and adverse health effects.

A one-step preconcentration method using two columns in series was used to partition trace metals in natural waters into several operationally defined fractions. The water passed through a Chelex-100 cation exchange column to collect dissolved labile trace metals and then through an AG MP-1 macroporous resin column to collect trace metals complexed with natural organic matter. A third fraction (inert) was obtained from the difference between total dissolved trace metal concentrations, determined after UV irradiation of a separate aliquot, and the sum of the fractions retained on the two columns. This analytical scheme was successfully applied to the determination of Al, Cd, Co, Cu, Fe, Mn, Ni, Pb, V, and Zn in river waters collected from across the state of Texas. Trace metal partitioning between fractions was found to be stable for at least 8 days after the addition of ammonium acetate buffer (pH 5.5). In most samples collected from relatively pristine sections of Texas rivers, the sum of fractions retained on the two columns accounted for better than 80% of the total dissolved trace metal concentrations. In rivers where anthropogenic inputs were more evident (San Antonio and Trinity Rivers), the inert fraction became pronounced, in some cases accounting for up to 95% of the total dissolved concentrations. The preconcentrate is free of matrix interference and can be easily analyzed by atomic absorption spectrometer or inductively coupled plasma mass spectrometer. Using a 1-L sample allows preconcentration factors of 150 or higher for both labile and organic fractions, and therefore, trace metal concentrations and speciation in natural waters at ambient levels can be accurately and precisely determined.

Soluble aluminum in rainwater was separated into three categories: free aluminum (Al3+), fluoride complexes (sum of AlF2+ and AlF2+), and other forms of aluminum. The free form of the aluminum ion (Al3+) was directly obtained from the separation data of aluminum species according to their charge using gradient elution cation-exchange chromatography. The aluminum fluoride complexes were estimated by combining the data of the free and total fluoride determined using a fluoride ion-selective electrode, with the assumption that 2+ charged aluminum species consisted only of AlF2+. The rest of the aluminum species had a 1+, neutral, or negative charge and mainly consisted of organic complexes. The origin of the organically bound aluminum is discussed. The concentration range of the total dissolved fluoride and aluminum in the rainwater samples was usually in the micromolar to submicromolar range, and the ratio of [T-F]/[T-Al] was found to be between 1 and 4. The speciation of dissolved aluminum into three categories was carried out on the basis of data of 15 rainwater samples collected in the city of Otsu.

The separation of basic pharmaceuticals is usually performed on C8 or C18 bonded silica supports. Silanolphilic interactions between basic analytes and surface silanol groups often lead to tailed peaks, poor efficiency, and irreproducible retention times. To solve these problems, many new types of silica-, zirconia-, and polymer-based columns, which provide unique selectivities, improved stability at high pH, or both, have been developed for the analysis of basic compounds. The essence of method development for the chromatographic analysis of basic compounds is to choose a system in which the band spacing can be varied dramatically, quickly, and conveniently while minimizing the tailing due to silanolphilic interactions. The thermally tuned tandem column (T3C) approach has been shown to provide an effective way to adjust stationary-phase selectivity for nonionic compounds. In this study, a tandem combination of an octadecylsilane (ODS) and a polybutadiene-coated zirconia (PBD-ZrO2) phase was used to separate nine antihistamines. Selectivity is tuned by independently adjusting the isothermal temperatures of the two columns. We found dramatic differences in the retention factors, elution sequences, and band spacing for the above set of basic drugs on the two types of columns. The T3C model has been used successfully to locate the optimal temperatures based on only four exploratory runs. The nine antihistamines were baseline separated on the tandem column combination even though they could not be separated on the individual phases. The effect of the buffer concentration on retention of the basic antihistamines was also studied. We conclude that cation-exchange interactions predominate on the PBD-ZrO2 phase, while reversed-phase interactions are more important on the ODS phase. Interestingly, an increase in column temperature causes a significant increase in the retention on the ODS column and a decrease of retention on the PBD-ZrO2 column. This can be explained by the change in the analyte's degree of ionization with temperature. The T3C combination of silica- and zirconia-based RPLC columns is demonstrated to be a powerful approach for the separation of this mixture of basic analytes.

An automated continuous instrument for the collection and measurement of aerosol Cr(VI) is described. The system alternately collects the sample on one of two glass fiber filters. After 15-min sample collection on one filter, the sampling switches over to the second filter. The freshly sampled filter is washed for 8.5 min, and the washings are preconcentrated on a minicolumn packed with anion exchange resin. The washed filter is dried with filtered hot air for the next 6.5 min so that it is ready for sampling at the end of the 15-min cycle. The preconcentrated Cr(VI) on the column is eluted with 0.1 M sodium perchlorate and then reacted with sym-1,5-diphenylcarbazide prior to absorbance detection with a light emitting diode-based dedicated flow-through absorbance detector. The detection limit (S/N = 3) is 5 ng of Cr(VI)/m3, orders of magnitude lower than current regulatory requirements. The instrument operates unattended over long periods. In continuous round-the-clock operation, filter replacement frequency is every 24-72 h, depending on dust loading. The system is portable for facile field deployment and permits fully automated rapid determinations at a very low analysis cost per sample.

The application range of microchips can be extended to any mode of chromatography by filling the narrow channels with continuous polymer beds, exemplified by electrochromatography and ion-exchange chromatography. "Wall effects" are eliminated by anchoring the bed to the wall of the channel, an arrangement which has the additional advantage that no frits to support the bed are required. The design of the equipment is based on a quartz chip with all auxiliary pieces (for example, electrode vessels and fluid transfer fittings) placed in a rack, which permits a flexibility of great importance for automation. The same resolution and van Deemter plots were obtained in experiments performed in fused-silica capillaries and in chips for both low-molecular-weight (alkyl phenones, antidepressants) and high-molecular-weight substances (proteins). A sample of uracil, phenol, and benzyl alcohol was separated by electrochromatography in less than 20 s.

A novel chemiluminescence (CL) flow-through sensor based on immobilizing all the ingredients involved in the analytical reaction for the determination of copper is proposed. The analytical reagents including luminol and cyanide were coimmobilized permanently on an anion-exchange column, while the analyte copper was retained temporarily by electrochemical preconcentration on a gold electrode placed in an anodic stripping voltammetric flow cell. By injection of a volume of sodium hydroxide through the column with immobilized reagents, luminol and cyanide were eluted from the resins in alkaline aqueous solution and then reacted with copper stripped from the gold electrode to produce a CL signal, by means of which copper could be sensed. The sensor was not susceptible to interference by other metal ions associated with the CL reaction. The response to the concentration of copper was linear in the range of 0.01-10 micrograms/L and an extremely low detection limit of 8.0 x 10(-3) micrograms/L was achieved. A complete analysis could be performed in 4 min with a relative standard deviation of less than 8%. The column with immobilized reagents was readily prepared and could be reused over 200 times. The sensor was applied successfully to the determination of copper in human serum and natural water samples.

A rapid method for determination of metal speciation based on an automated two-column ion exchange system is described. Two fractions of dissolved trace metal species are directly determined by on-line flame atomic absorption spectrophotometry after preconcentration by sequential columns of Chelex-100 chelating resin and AG MP-1 macroporous anion resin. A third fraction is determined by standard addition. Variables that affect the results obtained by the two-column system are studied by the use of model complexing agents. With a 10-mL sample loop, the sample throughput is 6 samples per hour and detection limits are 0.1 micrograms/L for Cu(II), 0.08 micrograms/L for Cd(II), and 0.2 micrograms/L for Zn(II). The method is used to determine the speciation of Cu(II), Cd(II), and Zn(II) in natural water samples.