Search

Microfluidic paper-based analytical devices (μPADs) are emerging as powerful analytical platforms in clinical diagnostics, food safety, and environmental protection because of their low cost and favorable substrate properties for biosensing. However, the existing top-down fabrication methods of paper-based chips suffer from low resolution (200 μm). Additionally, papers have limitations in their physical properties (e.g., thickness, transmittance, and mechanical flexibility). Here, we demonstrate a bottom-up approach for the rapid fabrication of heterogeneously controlled paper-based chip arrays. We simply print a wax-patterned microchip with wettability contrasts, enabling automatic and selective assembly of cellulose microfibers to construct predefined paper-based microchip arrays with controllable thickness. This paper-based microchip printing technology is feasible for various substrate materials ranging from inorganic glass to organic polymers, providing a versatile platform for the full range of applications including transparent devices and flexible health monitoring. Our bottom-up printing technology using cellulose microfibers as the starting material provides a lateral resolution down to 42 ± 3 μm and achieves the narrowest channel barrier down to 33 ± 2 μm. As a proof-of-concept demonstration, a flexible paper-based glucose monitor is built for human health care, requiring only 0.3 μL of sample for testing.

Microfluidic paper-based analytical devices (μPADs) are emerging as prominent platform for disease detection, specifically in developing countries. This paper device offers simplicity and affordability not typically seen in centralized laboratory settings. However, detection limits in μPADs are inadequate and often require tests results to be read within a specific time interval to ensure accuracy. To overcome these challenges, we are developing an on-chip mass spectrometry (MS) detection strategy for immunoassays performed on paper substrates. Herein, we present our initial results from a proof-of-concept study toward the development of μPADs capable of storing immunoassay reagents within the confinements of the 3D device, automatic splitting of biofluid into four individual test zones, immuno-capture of disease biomarker, and on-chip MS detection of captured species. The reported study encourages the development of point-of-care and direct-to-customer testing using the disposable μPAD to collect samples, followed by sensitive analysis using portable mass spectrometers. We demonstrate this capability using malaria Plasmodium falciparum histidine-rich protein 2 (PfHRP2) antigen detection.

Target-responsive nanomaterials attract growing interest in the application of drug delivery, bioimaging, and sensing due to the responsive releasing of guest molecules by the smart molecule gate. However, it remains a challenge to develop smart nanomaterials with simple assembly and low nonspecific leakage starting from encapsulation strategies, especially in the sensing field. Herein, Au nanoclusters (Au NCs) were first grown on porous carbon derived from ZIF-8 (PCZIF) to be employed as nanocarriers. By employing the Au NCs as linkers and aptamer (Apta) double-strand hybrids (target Apta and SH-complementary DNA) as capping units, we reported the novel target-responsive nanomaterials of Apta/Au NCs-PCZIF/hemin through Au-S binding encapsulation for sensing assays. The Au-S binding encapsulation strategy simplified the packaging procedure and reduced non-target responsive leakage. As a proof, ochratoxin A (OTA) as a model target participates in the double-strand hybrid competitive displacement reaction and triggered Apta conformation switches from a coil to a G-quadruplex structure accompanied by the dissociation of the gatekeeper. Simultaneously, the released hemin can initiate a self-assembly to form G-quadruplex/hemin DNAzyme. Interestingly, owing to DNAzyme providing electron transfer mediators and peroxidase-like activity, we proposed an electrochemical/colorimetric dual-mode paper-based analytical device (PAD) that provided self-verification to enhance reliability and accuracy, benefiting from independent signal conversion and transmission mechanism. As a consequence, the proposed dual-mode PAD could achieve sensitive electrochemical detection and visual prediction of OTA in the range of 1 pg/mL to 500 ng/mL and 50 pg/mL to 500 ng/mL, respectively. The electrochemical detection limit for OTA was as low as 0.347 pg/mL (

Illicit drug use causes over half a million deaths worldwide every year. Drugs of abuse are commonly smuggled through customs and border checkpoints and, increasingly, through parcel delivery services. Improved methods for detection of trace drug residues from surfaces are needed. Such methods should be robust, fieldable, sensitive, and capable of detecting a wide range of drugs. In this work, commercially produced paper with a pressure-sensitive adhesive coating was utilized for the collection and analysis of trace drug residues by paper spray mass spectrometry (MS). This modified substrate was used to combine sample collection of drug residues from surfaces with rapid detection using a single paper spray ticket. The all-in-one ticket was used to probe different surfaces commonly encountered in forensic work including clothing, cardboard, glass, concrete, asphalt, and aluminum. A total of 10 drugs (acetyl fentanyl, fentanyl, clonazolam, cocaine, heroin, ketamine, methamphetamine, methylone, U-47700, and XLR-11) were evaluated and found to be detectable in the picogram range using a benchtop mass spectrometer and in the low nanogram range using a portable ion trap MS. The novel approach demonstrates a simple yet effective sampling strategy, allowing for rapid identification from difficult surfaces via paper spray mass spectrometry.

Microfluidic paper-based analytical devices (μPADs) have attracted significant attention in the field of point-of-care (POC) diagnostics. However, the heterogeneous structure of the paper often impairs the limit of detection (LOD) for low-abundance targets when those targets are directly analyzed. One viable solution to bypass this limitation is to elevate the target concentration above the LOD on-site to reach a valid readout. Here, we developed a 3D μPADs preconcentrator (3D-μP

This paper introduces a novel potential-resolved paper-based biosensor for simultaneous detection of multiple microRNAs (miRNAs) (taking miRNA-155 and miRNA-126 as examples) based on the bipolar electrode (BPE) electrochemiluminescence (ECL) strategy. The proposed multiple-channel paper-based sensing microfluidic platform was prepared by wax-printing technology, screen-printing method, and in situ Au nanoparticles (AuNPs) growth to form hydrophilic areas, hydrophobic boundaries, waterproof electronic bridge, driving electrode regions, and parallel bipolar electrode regions. CdTe quantum dots (QDs)-H2 and Au@g-C3N4 nanosheets (NSs)-DNA1 were used as dual electrochemiluminescence signal probes, and carboxylated Fe3O4 magnetic nanoparticles existed as carriers. CdTe QDs-H2/S2O82- and Au@g-C3N4 NSs-DNA1/S2O82- could exhibit two strong and stable ECL emissions at a drive voltage of 9 and 12 V, respectively, which can be used as effective potential-resolved signal tags. In addition, the proposed three-dimensional (3D) DNA nanomachine model and the target miRNA cycle strategy were used to achieve double amplification of electrochemiluminescence intensity. More importantly, the combination of the bipolar electrode system and the potential-resolved multitarget electrochemiluminescence method can greatly reduce the spatial interference between substances. The prepared ECL biosensor showed a favorable linear response for the detection of miRNA-155 and miRNA-126 with relatively low detection limits of 5.7 and 4.2 fM, respectively. With excellent sensitivity, the strategy may provide an efficient method for clinical application, especially in detection of trace multiple targets.

Tuberculosis (TB), one of the deadliest infectious diseases, is caused by Mycobacterium tuberculosis (MTB) and remains a public health problem nowadays. Conventional MTB DNA detection methods require sophisticated infrastructure and well-trained personnel, which leads to increasing complexity and high cost for diagnostics and limits their wide accessibility in low-resource settings. To address these issues, we have developed a low-cost photothermal biosensing method for the quantitative genetic detection of pathogens such as MTB DNA on a paper hybrid device using a thermometer. First, DNA capture probes were simply immobilized on paper through a one-step surface modification process. After DNA sandwich hybridization, oligonucleotide-functionalized gold nanoparticles (AuNPs) were introduced on paper and then catalyzed the oxidation reaction of 3,3',5,5'-tetramethylbenzidine (TMB). The produced oxidized TMB, acting as a strong photothermal agent, was used for the photothermal biosensing of MTB DNA under 808 nm laser irradiation. Under optimal conditions, the on-chip quantitative detection of the target DNA was readily achieved using an inexpensive thermometer as a signal recorder. This method does not require any expensive analytical instrumentation but can achieve higher sensitivity and there are no color interference issues, compared to conventional colorimetric methods. The method was further validated by detecting genomic DNA with high specificity. To the best of our knowledge, this is the first photothermal biosensing strategy for quantitative nucleic acid analysis on microfluidics using a thermometer, which brings fresh inspirations on the development of simple, low-cost, and miniaturized photothermal diagnostic platforms for quantitative detection of a variety of diseases at the point of care.

Multilayered and stacked cellulose paper has emerged as a promising platform for construction of three-dimensional (3D) cell culture because of its low cost, good biocompatibility, and high porosity. However, its poor light transmission makes it challenging to directly and clearly monitor cell behaviors (e.g., growth and proliferation) on the paper-based platform using an optical microscope. In this work, we developed a transparent microcrystalline cellulose/polyvinyl alcohol (MCC/PVA) paper with irregular pores through dissolution and regeneration of microcrystalline nanocellulose, addition of a porogen reagent (NaCl), and subsequently dipping in PVA solutions. The transparent MCC paper displays high porosity (up to 90%), adjustable pore size (between 23 and 46 μm), large thickness (from 315 to 436 μm), and high light transmission under water (95%). Through further modification of the transparent MCC paper with PVA, the obtained transparent MCC/PVA paper shows enhanced mechanical properties (dry and wet strengths), good hydrophilicity (with a contact angle of 70.8°), and improved biocompatibility (cell viability up to 90%). By stacking and destacking multiple layers of the transparent MCC/PVA paper, it has been used for both two-dimensional and three-dimensional cell culture platforms. The transparent MCC/PVA paper under water enables both direct observation of cell morphology by an optical microscope via naked eyes and fluorescence microscope after staining. We envision that the developed transparent MCC/PVA paper holds great potential for future applications in various bioanalytical and biomedical fields, such as drug screening, tissue engineering, and organ-on-chips.

Diabetes mellitus is one of the most common chronic diseases worldwide. Generally, the levels of fasting or postprandial blood glucose and other biomarkers, such as glycated albumin, glycated hemoglobin, and 1,5-anhydroglucitol, are used to diagnose or monitor diabetes progression. In the present study, we developed a sensor to simultaneously detect the glucose levels and glycation ratios of human serum albumin using a lateral flow assay. Based on the specific enzymatic reactions and immunoassays, a spiked glucose solution, total human serum albumin, and glycated albumin were measured simultaneously. To test the performance of the developed sensor, clinical serum samples from healthy subjects and patients with diabetes were analyzed. The glucose level and glycation ratios of the clinical samples were determined with reasonable correlation. The R-squared values of glucose level and glycation ratio measurements were 0.932 and 0.930, respectively. The average detection recoveries of the sensor were 85.80% for glucose and 98.32% for the glycation ratio. The glucose level and glycation ratio in our results were crosschecked with reference diagnostic values of diabetes. Based on the outcomes of the present study, we propose that this novel platform can be utilized for the simultaneous detection of glucose and glycation ratios to diagnose and monitor diabetes mellitus.

Paper is emerging as a versatile platform for automated fluid handling with a broad range of applications in medical diagnostics and analytical chemistry. However, selectively controlling analyte transport in paper to achieve concentration or selection has been a challenge for functional analysis. Here, by combining paper-based microfluidics with acoustics, we present a rapid and powerful method to size dependently control movement of microparticles and cells in paper using surface acoustic waves (SAW). We demonstrate the unique capability of the paper-based SAW approach to trap and concentrate microparticles in paper and release them when required, achieving collection efficiency of over 98%. Given the correlation between collection efficiency, size, and applied power, the paper-based SAW approach is applied to isolate a mixture of microparticles (1.1, 3.2, and 5 μm in diameter) into different regions and also to trap and concentrate human prostate cancer PC3 cells at a predetermined site. This paper-based SAW approach provides opportunities to develop powerful and low-cost selection and analysis tools, capable of processing complex multicomponent samples, with potential applications in medical diagnostics.

Cellulose paper has strong potential as an analytical platform owing to its unique characteristics. In the present study, we investigated a procedure for functionalizing the surface of cellulose paper by dip-coating a mixture of a functional polymer and a perfluoroalkylated surfactant (surfactant 1). The functional polymer comprised a mixture of methyl methacrylate and poly(ethylene glycol) methacrylate monomers. The monomer ratio in the functional polymer affected the hydrophilicity and water absorbance of the cellulose paper after dip-coating. Furthermore, the presence of surfactant 1 during dip-coating promoted the surface segregation of poly(ethylene glycol) (PEG) moieties in the polymer, which enhanced the hydrophilicity, prevented nonspecific protein adsorption, and maintained the water absorbance of the dip-coated cellulose paper. Dip-coating with another functional polymer containing biotin groups produced a cellulose paper with a biotin-decorated surface in a one-step procedure. The displayed biotin groups immobilized avidin on the surface, and the PEG moieties in the polymer prevented nonspecific protein adsorption. We then immobilized a thrombin-binding DNA aptamer on the avidin-immobilized cellulose paper to prepare a paper-based analytical device. It is possible to visualize thrombin in model solutions and serum using the paper-based analytical device.

Paper spray ionization has been used as a fast sampling/ionization method for the direct mass spectrometric analysis of biological samples at ambient conditions. Here, we demonstrated that by utilizing paper spray ionization-mass spectrometry (PSI-MS) coupled with field asymmetric waveform ion mobility spectrometry (FAIMS), predictive metabolic and lipidomic profiles of routine breast core needle biopsies could be obtained effectively. By the combination of machine learning algorithms and pathological examination reports, we developed a classification model, which has an overall accuracy of 87.5% for an instantaneous differentiation between cancerous and noncancerous breast tissues utilizing metabolic and lipidomic profiles. Our results suggested that paper spray ionization-ion mobility spectrometry-mass spectrometry (PSI-IMS-MS) is a powerful approach for rapid breast cancer diagnosis based on altered metabolic and lipidomic profiles.

Many potential chemotherapeutics fail to reach patients. One of the key reasons is that compounds are tested during the drug discovery stage in two-dimensional (2D) cell cultures, which are often unable to accurately model in vivo outcomes. Three-dimensional (3D) in vitro tumor models are more predictive of chemotherapeutic effectiveness than 2D cultures, and thus, their implementation during the drug screening stage has the potential to more accurately evaluate compounds earlier, saving both time and money. Paper-based cultures (PBCs) are an emerging 3D culture platform in which cells suspended in Matrigel are seeded into paper scaffolds and cultured to generate a tissue-like environment. In this study, we demonstrate the potential of matrix-assisted laser desorption/ionization-mass spectrometry imaging with PBCs (MALDI-MSI-PBC) as a drug screening platform. This method discriminated regions of the PBCs with and without cells and/or drugs, indicating that coupling PBCs with MALDI-MSI has the potential to develop rapid, large-scale, and parallel mass spectrometric drug screens.

While colorimetric-based assays are very convenient to determine biomarkers in point-of-care testing (POCT), they often suffer from pretreatment procedures for separation of plasma or serum from whole blood samples. Here, we report a simple colorimetric paper-based analytical device (c-PAD) that is capable of performing sample-to-answer analysis by directly dropping the whole blood sample on paper. This is accomplished by utilizing sodium alginate hydrogel, which exhibits a nanometer-scale porous structure to effectively prevent the passage of large red blood cells and hemoglobin molecules, to encapsulate enzymes and chromogenic reagents. As the small targets in the blood sample enter the sensing region to trigger a chromogenic reaction, the resulting color signal is recorded by a smartphone. The interference from the red blood to the color signal can be completely avoided without the requirement of any separation process. The analytical performance of the method is evaluated by assaying glucose in real blood samples. The results show that rapid and accurate analysis can be achieved with the limit of detection as low as 0.12 mM. In addition, simultaneous detection of different targets (glucose, cholesterol, and triglycerides) in whole blood can be achieved by fabricating c-PAD with multiple sensing regions. Owing to its several essential advantages including an extremely simple procedure for fabrication, sample-to-answer analysis without tedious pretreatment, and capability to perform high-throughput analysis, the proposed c-PAD will be of great value in POCT applications of whole blood samples.

Chemiluminescence (CL) immunoassays for simultaneous detection of early acute myocardial infarction (AMI) biomarkers, including copeptin, heart-type fatty acid binding protein (h-FABP), and cardiac troponin I (cTnI), were developed by using Co2+/N-(aminobutyl)-N-(ethylisoluminol) (ABEI) functionalized magnetic carbon composite (Co2+-ABEI-Fe3O4@void@C) as an interface and a three-dimensional microfluidic paper-based device (3D μPAD) as a detection system. For CL immunoassays, Co2+-ABEI-Fe3O4@void@C was assembled with chitosan (CS) and gold nanoparticle-conjugated antibody (Au-Ab) sequentially to form the sensing platform (Co2+-ABEI-Fe3O4@void@C-CS/Au-Ab). In the presence of antigen (Ag), Ag was captured by the sensing interface to form an immunocomplex, leading to an increase in CL intensity due to the catalysis of -COO- existing in Ag. A 3D μPAD with three detection zones for simultaneous detection of copeptin, h-FABP, and cTnI was designed and fabricated to obtain time-resolved CL signals. Three kinds of immunocomplexes formed with copeptin, h-FABP, and cTnI were added to three detection zones of 3D μPAD, respectively. After injecting H2O2, three time-resolved CL signals were generated in one CL detection run by virtue of time-delayed transport of H2O2 to different detection zones. The three time-resolved CL signals were used for the simultaneous determination of copeptin, h-FABP, and cTnI. The detection limit of copeptin, h-FABP, and cTnI was 0.40 pg/mL, 0.32 pg/mL, and 0.50 pg/mL, respectively, which is at least 1 order of magnitude lower than most of the reported immunoassays. The immunoassays could be directly used for the detection of copeptin, h-FABP, and cTnI in human serum samples. The proposed immunoassays are simple, fast, sensitive, and selective, and are of great application potential in early diagnosis and treatment of AMI.

Multiclass chemical contamination of food has aroused ever-increasing attention due to the increasingly common findings of the co-occurrence of multiclass contamination, such as mycotoxin (aflatoxin M1, AFM1) and illegal additive (melamine, MEL). In the present study, a rapid, ultrasensitive detection paper was developed on the basis of a unique bridge-antibody label to realize on-site simultaneous detection of AFM1 and MEL in milk. This detection paper used the bridge-antibody label on fluorescent particles (i.e., the fluorescent Eu nanoparticles were first conjugated with polyclonal antibodies and then with monoclonal antibodies). Dramatically enhanced sensitivity was found, probably due to the increase in immobilization of efficient monoclonal antibodies onto microspheres. Under optimal conditions, the lower limits of detection were 0.009 and 0.024 ng/mL for AFM1 and MEL in milk, respectively, in comparison with similar works. Moreover, the cutoff values were 0.4 and 150 ng/mL for AFM1 and MEL, respectively. The recoveries ranged from 88.7% to 105.0% for AFM1 and from 84.6% to 117.7% for MEL, with relative standard deviations (RSDs) of 0.5-9.9% during the intraday and interday experiments. Comparison experiments conducted using the detection paper, HPLC, and UPLC-MS/MS found excellent agreement in the simultaneous detection of AFM1 and MEL in milk. This proposed method can be extensively employed for simultaneous monitoring of multiclass chemical contaminants to ensure food safety.

This paper focuses on one of the most commonly encountered materials in our society, namely paper. Paper is an inherently complex material, yet its use provides for chemical analysis approaches that are elegant in their simplicity of execution. In the first half of the previous century, paper in scientific research was used mainly for filtration and chromatographic separation. While its use decreased with the rise of modern elution chromatography, paper remains a versatile substrate for low-cost analytical tests. Recently, we have seen renewed interest to work with paper in (bio)analytical science, a result of the growing demand for inexpensive, portable analysis. Dried blood spotting, paper microfluidics, and paper spray ionization are areas in which paper is (re)establishing itself as an important material. These research areas all exploit several properties of paper, including stable sample storage, passive fluid movement and manipulation, chromatographic separation/extraction, modifiable surface and/or volume, easily altered shape, easy transport, and low cost. We propose that the real, and to date underexploited, potential of paper lies in utilizing its combined characteristics to add new dimensions to paper-based (bio)chemical analysis, expanding its applicability. This article provides the reader with a short historical perspective on the scientific use of paper and the developments that led to the establishment of the aforementioned research areas. We review important characteristics of paper and place them in a scientific context in this descriptive, yet critical, assessment of the achieved and the achievable in paper-based analysis. The ultimate goal is the exploration of integrative approaches at the interface between the different fields in which paper is or can be used.

Significant efforts have been made to develop robust and reliable methods for simultaneous biothiols determination in different matrices, but there still exist the problems such as easy oxidation, tedious derivatization, and difficulty in discrimination, which brings unsatisfactory results in their accuracy and fast quantification in biological samples. To overcome these problems, a simultaneous biothiols detection method combining a "selenium signature" chemical probe and paper spray mass spectrometry (PS-MS) was proposed. In the strategy, the modified-paper substrate is used to enhance the analytical performance. Chemical probe Ebselen-NH2 that has a specific response to biothiols was designed and covalently fixed on the surface of an oxidized paper substrate. By the identification of derivatized product with distinctive selenium isotope distribution and employment of the optimized PS-MS method, qualitative and quantitative analysis of five biothiols including glutathione (GSH), cysteine (Cys), cysteinylglycine (CysGly), N-acetylcysteine (Nac), and homocysteine (Hcy) were realized. Biothiols in plasma and cell lysates were measured with satisfactory results. The established method not only provides a novel protocol for simultaneous determination of biothiols, but also is helpful for understanding the biological and clinical roles played by these bioactive small molecules.

Conventional paper lateral flow assays have low sensitivity and suffer from severe interference from complex human fluid sample matrices, which prevents their practical application in the testing of whole blood samples in the point-of-care settings. To solve this problem, gold nanostar@Raman reporter@silica-sandwiched nanoparticles have been developed as the surface-enhanced Raman scattering (SERS) probes for sensing transduction; and a functionalized filter membrane assembly has been designed and constructed in the paper-based lateral flow strip (PLFS) as a built-in plasma separation unit. In this "on-strip" plasma separation unit, three layers of filter membranes are stacked and surface-modified to maximize the separation efficiency and the plasma yield. As a result, the integrated PLFS has been successfully used for the detection of carcinoembryonic antigen (CEA) in 30 μL of whole blood with the assistance of a portable Raman reader, achieving a limit of detection of 1.0 ng mL-1. In short, this report presents an inexpensive, disposable, portable, and field-deployable paper-based device as a general point-of-care testing tool for protein biomarker detection in a drop of whole blood.

Simple, rapid, and accurate detection methods for saccharides are potentially applicable to various fields such as clinical and food chemistry. However, the practical applications of on-site analytical methods are still limited. To this end, herein, we propose a 96-well microtiter plate made of paper as a paper-based chemosensor array device (PCSAD) for the simultaneous classification of 12 saccharides and the quantification of fructose and glucose among 12 saccharides. The mechanism of the saccharide detection relied on an indicator displacement assay (IDA) on the PCSAD using four types of catechol dyes, 3-nitrophenylboronic acid, and the saccharides. The design of the PCSAD and the experimental conditions for the IDA were optimized using a central composite design. The chemosensors exhibited clear color changes upon the addition of saccharides on the paper because of the competitive boronate esterification. The color changes were employed for the subsequent qualitative, semiquantitative, and quantitative analyses using an automated algorithm combined with pattern recognition for digital images. A qualitative linear discrimination analysis offered discrimination of 12 saccharides with a 100% classification rate. The semiquantitative analysis of fructose in the presence of glucose was carried out from the viewpoint of food analysis utilizing a support vector machine, resulting in clear discrimination of the various concentrations of fructose. Most importantly, the quantitative detection of fructose in two types of commercial soft drinks was also successfully carried out without sample pretreatments. Thus, the proposed PCSAD can be a powerful method for on-site food analyses that can meet the increasing demand from consumers for sensors of saccharides.

This study is focused on identifying novel epithelial markers in circulating extracellular vesicles (EVs) through the development of a dual sandwich-type electrochemical paper-based immunosensor for Claudin 7 and CD81 determination, as well as its validation in breast cancer (BC) patients. This immunosensor allows for rapid, sensitive, and label-free detection of these two relevant BC biomarkers. Under optimum conditions, the limit of detection for Claudin 7 was 0.4 pg mL-1, with a wide linear range of 2 to 1000 pg mL-1, while for CD81, the limit of detection was 3 pg mL-1, with a wide linear range of 0.01 to 10 ng mL-1. Finally, we validated Claudin 7 and CD81 determination in EVs from 60 BC patients and 20 healthy volunteers, reporting higher diagnostic accuracy than the one observed with classical diagnostic markers. This analysis provides a low-cost, specific, versatile, and user-friendly strategy as a robust and reliable tool for early BC diagnosis. Fil: Ortega, Francisco G.. Balearic Islands Health Research Institute; España Fil: Regiart, Matías D.. Universidade de Sao Paulo; Brasil Fil: Rodríguez Martínez, Alba. Universidad de Granada; España Fil: De Miguel-Pérez, Diego. Universidad de Granada; España Fil: Serrano, María J.. Universidad de Granada; España Fil: Lorente, José A.. Universidad de Granada; España Fil: Tortella, Gonzalo. Universidad de La Frontera; Chile Fil: Rubilar, Olga. Universidad de La Frontera; Chile Fil: Sapag, Manuel Karim. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - San Luis. Instituto de Física Aplicada "Dr. Jorge Andrés Zgrablich". Universidad Nacional de San Luis. Facultad de Ciencias Físico Matemáticas y Naturales. Instituto de Física Aplicada "Dr. Jorge Andrés Zgrablich"; Argentina Fil: Bertotti, Mauro. Universidade de Sao Paulo; Brasil Fil: Fernández Baldo, Martín Alejandro. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - San Luis. Instituto de Química de San Luis. Universidad Nacional de San Luis. Facultad de Química, Bioquímica y Farmacia. Instituto de Química de San Luis; Argentina

The analysis of protein antigens as biomarkers in clinical samples is particularly helpful for the early diagnosis of diseases. However, this is difficult to accomplish owing to the presence of the antigens in trace amounts as well as the complexity of the matrixes in clinical samples. In this study, a lab-on-membrane platform that can be combined with paper spray ionization mass spectrometry was developed for the in situ high-throughput sensitive detection of the prostate-specific antigen (PSA). The sensitivity of the proposed platform was enhanced via two strategies: (1) the synthesis of a biotin-streptavidin scaffold caused an increase in the capturing efficiency of PSA by a factor of 5 and (2) the immobilization of a large number of mass tag molecules on the gold nanoparticles allowed for the amplification of the mass spectrometry signals. The limit of detection was approximately 3.0 pg mL-1. The selectivity to PSA was guaranteed by using an antibody-aptamer pairing sandwich immunoassay, and PSA detection was unaffected even when other protein antigens (carcinoembryonic antigen and carbohydrate antigen 125) were present. The modified membranes maintained their performance for at least 30 days when stored at 4 °C. Finally, analysis of human serum samples confirmed that the PSA concentration as determined using the proposed platform was consistent with that determined with a conventional chemiluminescent immunoassay. Thus, this PSA analyzing platform is suitable for prostate cancer diagnosis in clinical settings.

Exploring efficient luminophores in the electrochemiluminescence (ECL) system is highly desired to pursue a sensitive ECL sensing platform. Herein, the black phosphorus nanosheets (BP NSs) with excellent ECL properties are investigated and serve as the luminophore with the coreactant of peroxydisulfate (S2O82-) solution. Moreover, owing to the overlapping of emission and absorbance spectra, effective resonance energy transfer (RET) is realized between the BP NSs and the introduced Au nanoparticles. In order to achieve the portable and miniaturized developing trends for the paper-based ECL sensing platform, a paper-based perovskite solar cell (PSC) device is designed to act as the power source to replace the commonly utilized expensive and cumbersome electrochemical workstation. Benefiting from that, a PSC driven paper-based constant potential ECL-RET sensing platform is constructed, thereby realizing sensitive microRNAs (miRNAs) detection. What's more, to attain the preferable analytical performance, the duplex-specific nuclease (DSN) is also introduced to assist the target recycling signal amplification strategy. Based on this, highly sensitive detection of miRNA-107 with a range from 0.1 pM to 15 nM is achieved by this designed sensing platform. Most importantly, this work not only pioneers a precedent for developing a high-sensitivity PSC triggered ECL sensing platform but also explores the application prospect of BP nanomaterial in the field of bioanalysis.

Rapid and sensitive detection of metabolites and chemical residues in human tears is highly beneficial for understanding eye health. In this study, Schirmer paper was used for noninvasive microsampling of human tears, and then paper spray mass spectrometry (PSMS) was performed for direct analysis of human tears. Schirmer PSMS was successfully used for rapid diagnosis of dry-eye syndrome by detecting the volume and metabolites of human tears. Drugs of abuse, therapeutic drugs, and pharmacodynamics in human tears were also investigated by Schirmer PSMS. Furthermore, specific markers of environmental exposures in the air to human eyes, including volatile organic compounds, aerosol, and smoke, were unambiguously sampled and detected in human tears using Schirmer PSMS. Excellent analytical performances were achieved, including single-use, low-sample consumption (1.0 μL), rapid analysis (the whole analytical procedure completed within 3 min), high sensitivity (absolute limit of detection less than or equal to 0.5 pg, signal-to-noise ratio greater than or equal to 3), good reproducibility (relative standard deviation less than 10%, n = 3), and accurate quantitation (average deviation less than 3%, n = 3). Overall, our results showed that Schirmer PSMS is a highly effective method for direct tear analysis and is expected to be a convenient tool for human tear analysis in significant clinical applications.

Glass slides have been widely used for DNA immobilization in DNA microarray and numerous bioassays for decades, whereas they are faced with limitations of low probe density, time-consuming modification steps, and expensive instruments. In this work, a simple one-step surface modification method using 3-aminopropyl trimethoxysilane (APTMS) has been developed and applied to graft DNA codes on paper. Higher DNA immobilization efficiency was obtained in comparison with that in a conventional method using glass slides. Fluorescence detection, X-ray photoelectron spectroscopy (XPS), infrared spectra (FT-IR), and pH influence studies were employed to characterize the surface modification and subsequent DNA immobilization, which further reveals a mechanism in which this method lies in ionic interactions between the positively charged APTMS-modified paper surface and negatively charged DNA probes. Furthermore, an APTMS-modified paper-based device has been developed to demonstrate application in low-cost detection of a foodborne pathogen

Despite the recent developments on the construction of point-of-care testing (POCT) devices, it is still a big challenge to build portable POCT tools for simple, sensitive, selective, and quantitative determination of disease-related biomarkers. With this in mind, we developed a simple and user-friendly POCT tool for onsite analysis of DNA adenine methyltransferase (Dam) activity by using DNA tetrahedra-based hydrogel to trap glucose-producing enzymes for target recognition and signal transduction. The enzyme-encapsulated DNA hydrogel and the substrate of enzyme were separately modified on papers and then combined onto a commercial glucose test strip for the sensitive evaluation of Dam activity via using a personal glucose meter (PGM) for quantitative signal readout. Taking advantage of the great amount of enzyme entrapped in DNA hydrogel and the high signal amplification ability of enzyme, this POCT tool is capable of highly sensitive and selective determination of Dam activity with a direct detection limit down to 0.001 U/mL, which is superior to that of most previously reported biosensors. Furthermore, this device can also be applied to screen inhibitor and analyze Dam activity in spiked serum samples, indicating the great potential for clinical practice and diagnostic applications. Additionally, all the reactions for Dam assay are performed on paper, which is simple and deliverable to end-users for medical diagnostics at home or in-field.

Blood is the most intensely studied human biofluid and is used as the main indicator (so-called “gold standard”) of the health status of the individual. Blood is also a very complex fluid, containing a multiplicity of components, including cells and cell fragments (red and white blood cells, platelets), proteins, and many other organic molecules. Laboratory-based blood analysis is a standard procedure that provides a wealth of information about the concentration of key components and enables medical personnel to establish diagnoses and treatments. To date, options for point-of-care (POC) or point-of-use (POU) blood analysis are limited and very low-cost options even more so. One analytical platform that contains the promise to fill this need utilizes paper-based microfluidic devices. This is a research area that has exhibited significant growth in the past few years, primarily because of its simplicity, fundamental low cost, and versatility. This article reviews the basic properties of blood, how these pr...

The health risks associated with acute and prolonged exposure to estrogen receptor (ER) modulators has led to a concerted effort to identify and prioritize potential disruptors present in the environment. ER agonists and antagonists are identified with end-point assays, quantifying changes in cellular proliferation or gene transactivation in monolayers of estrogen receptor alpha expressing (ER+) cells upon exposure. While these monolayer cultures can be prepared, dosed, and analyzed in a highly parallelized manner, they are unable to predict the potencies of ER modulators in vivo accurately. Physiologically relevant model systems that better predict tissue- or organ-level responses are needed. To address this need, we describe here a screening platform capable of quantitatively assessing ER modulators in 96 chemically isolated 3D cultures. These cultures are supported in wax-patterned paper scaffolds whose design has improved performance and throughput over previously described paper-based setups. To highlight the potential of paper-based cultures for toxicity screens, we measured the potency of known ER modulators with a luciferase-based reporter assay. We also quantified the proliferation and invasion of two ER+ cell lines in the presence of estradiol. Despite the inability of the current setup to better predict in vivo potencies of ER modulators than monolayer cultures, the results demonstrate the potential of this platform to support increasingly complex and physiologically relevant tissue-like structures for environmental chemical risk assessment.

Altres ajuts: the ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. The development of paper-based electroanalytical strips as powerful diagnostic tools has gained a lot of attention within the sensor community. In particular, the detection of nucleic acids in complex matrices represents a trending topic, especially when focused toward the development of emerging technologies, such as liquid biopsy. DNA-based biosensors have been largely applied in this direction, and currently, there are two main approaches based on target/probe hybridization reported in the literature, namely Signal ON and Signal OFF. In this technical note, the two approaches are evaluated in combination with paper-based electrodes, using a single strand DNA relative to H1047R (A3140G) missense mutation in exon 20 in breast cancer as the model target. A detailed comparison among the analytical performances, detection protocol, and cost associated with the two systems is provided, highlighting the advantages and drawbacks depending on the application. The present work is aimed to a wide audience, particularly for those in the field of point-of-care, and it is intended to provide the know-how to manage with the design and development stages, and to optimize the platform for the sensing of nucleic acids using a paper-based detection method.

Water is one of the most widespread impurities and contaminants for pharmaceuticals and chemical products. A simple, fast and reliable water assay method is of high significance for the pharmaceutical and chemical manufacturing industries. In this work, lanthanide metal-organic framework Eu-dipicolinic acid/2-aminophthalic acid (Eu-DPA/PTA-NH2) was prepared as a double-color ratiometric fluorescent water sensor, which shows ultrasensitive (limit of detection 0.01% v/v) and linear broad-range (0-100% v/v) response to water. An innovative analytical device based on a one-to-two logic gate was constructed by using the water content and the two fluorescence responses as the input and output signals, respectively. The direct analysis of water content can be achieved by the four output types, NOT (0, 1), PASS 0 (0, 0), PASS 1 (1, 1), and YES (1, 0). Importantly, the metal-organic framework (MOF)-loaded fiber paper was prepared as a microsensor, and a water assay tube was designed for rapid water detection of solid pharmaceuticals via ratiometric chromaticity, coupled with a portable visual determination device. The paper-based microsensor is response-rapid (20 s), long-term stable (at least 30 days), and can achieve the accurate (relative error

Exposure to trace metals in airborne particulate matter (PM) has been linked to various adverse health effects. Quantifying metals in PM is important; however, current analytical tools tend to be bulky and expensive. A need therefore exists for more rapid, low-cost, portable tools for multiplexed determination of metals in PM. Electrochemical paper-based devices (ePADs) have been used for detecting metals in PM but require different devices and methods for different metals, making the systems more complicated than desired. Recently reported Janus ePADs offer a solution to this problem by allowing for multiple electrochemical experiments from a single sample. Here, we sought to determine if a Janus ePAD containing four independent channels and working electrodes could be used for simultaneous detection of multiple metals in PM. Online sample pretreatment in each channel during sample delivery yielded optimal conditions for each experiment. The design allows the device to conduct square-wave anodic stripping voltammetry (SWASV) and square-wave cathodic stripping voltammetry (SWCSV) for simultaneous detection of Cd, Pb, Cu, Fe, and Ni from a single sample. Two detection zones each with shared reference and counter electrodes were used for SWASV and SWCSV, respectively. The proposed sensors reached LODs down to 0.5, 0.5, 1.0, 0.5, and 1.0 μg L

A paper chip device-based recombinase polymerase amplification (RPA) method was developed for highly sensitive and selective single-step detection of foodborne pathogens. A paper chip was manufactured by simply stacking functional papers. RPA reagents and fluorescent probe were dried on the reaction zone of a patterned poly(ether sulfone) membrane. The RPA reaction was initiated by adding pathogen DNAs into an injection hole. Paper chip-based analysis of pathogens showed optimal performance at 37 °C for 20 min and the results were comparable to those obtained with solution-based RPA reactions. Based on the paper chip-based fluorescence signal, Escherichia coli, Staphylococcus aureus, and Salmonella typhimurium were simultaneously detected with detection limits of 102 cfu/mL. The diagnostic utility of the device was demonstrated by the reliable detection of E. coli and S. aureus present in spiked milk. This ready-to-use device could be integrated with simple nucleic acid extraction for food pathogen detect...

Integrating ratiometric photoelectrochemical (PEC) techniques with paper microfluidics to construct a ratiometric PEC paper analytical device for practical application is often restricted by the grave dependence of ratiometric assay on photoactive materials and low mass-transfer rates of the paper channel. Herein, a universal donor/acceptor-induced ratiometric PEC paper analytical device with a hollow double-hydrophilic-walls channel (HDHC) was fabricated for high-performance microRNA-141 (miRNA-141) quantification. Concretely, a photoanode and photocathode were integrated on the paper-based sensing platform in which the photocathode served as a biosensing site for the pursuit of higher selectivity. For formulation of a cascading signal amplification strategy, a unique duplex-specific nuclease-induced target recycling reaction was engineered for the output of a double amount of all useful DNA linkers instead of conventional output of only one available DNA product, which could guarantee the output of abundant DNA linkers with the initiation of a cascade of hybridization chain reaction on both the trunk and branch in the presence of miRNA-141. Then the formed dendriform polymeric DNA duplex structures were further decorated with glucose oxidase (GOx)-mimicking gold nanoparticles by the electrostatic interaction to form a branchy gold tree (BGT). Profiting from the perfect GOx-mimicking activity of BGT and high mass-transfer rates of HDHC, the cathodic photocurrent from Ag

In this work, we characterize the impact of large-volume processing upon the analytical sensitivity of flow-through paper-based immunoassays. Larger sample volumes feature greater molar quantities of available analyte, but the assay design principles which would enable the rapid collection of this dilute target are ill-defined. We developed a finite-element model to explore the operating conditions under which processing large sample volumes via pressure-driven convective flow would yield an improved binding signal. Our simulation results underscore the importance of establishing a high local concentration of the analyte-binding species within the porous substrate. This elevated abundance serves to enhance the binding kinetics, matching the time scale of target capture to the period during which the sample is in contact with the test zone (i.e., the effective residence time). These findings were experimentally validated using the rcSso7d-cellulose-binding domain (CBD) fusion construct, a bifunctional binding protein which adsorbs to cellulose in high abundance. As predicted by our modeling efforts, the local concentration achieved using the rcSso7d-CBD species is uniquely enabling for sensitivity enhancement through large-volume processing. The rapid analyte depletion which occurs at this high surface density also permits the processing of large sample volumes within practical time scales and flow regimes. Using these findings, we present guidance for the optimal means of processing large sample volumes for enhanced assay sensitivity.

This paper describes, for the first time, the use of oxidized buckypaper (BP) as a sorbent membrane of a stir-disc solid phase extraction module. The original device, consisting of a BP disc (d = 34 mm) enveloped in a polypropylene mesh pouch, was designed to extract organic micropollutants (OMPs) from environmental water samples in dynamic mode. High-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) was used to analyze the extracts. Several classes of pesticides and pharmaceuticals were chosen as model compounds to evaluate key parameters affecting the recovery rates. To this end, the effects of adsorption time, desorption time, stirring speed, type and volume of solvent, and sample volume were thoroughly examined. After optimization, a novel and in-depth study was conducted to find a correlation between physicochemical properties of the analytes and extraction yields. Recoveries were mainly governed by a combination of logP and pKa values. As indicated, hydrophilic compounds with l...

Despite rapid progresses in single-cell analysis technologies, efforts to control the three-dimensional microenvironment for single cell measurements have been lacking. Here, we report a simple method to incorporate three-dimensional scaffolds, including polyvinylidene fluoride (PVDF) membranes and PVDF membrane replicated analog polydimethylsiloxane, into multiplexed single cell secretomic analysis platforms (including a microwell array and a single cell barcode microchip) to mimic the extracellular physical matrix and mechanical support for single cells. Applying this platform to brain tumor cell line U87 to investigate single cell protein secretion behavior on different substrates, we revealed that single cell protein secretions were regulated differently in three-dimensional (3D) microenvironments. This finding was further verified with intracellular cytokine staining, highlighting the significance of 3D single cell microenvironments. This new single cell biomimetic platform can be easily adaptable to other three-dimensional cell culture scaffolds or other single cell assays and may become a broadly applicable three-dimensional single cell analysis system to study the effect of microenvironment conditions on cellular functional heterogeneity in vitro.

Highly selective and sensitive detection of guanosine 3′-diphosphate-5′-diphosphate (ppGpp), namely, the stringent in plants or microorganisms responding to strict or extreme environmental conditions such as stress and starvation, which plays an important role in gene expression, rRNA and antibiotics production, regulations of virulence of bacteria, and growth of plants, faces a great challenge owing to its extreme similarity to normal nucleotides. By modifying the surface groups of a facile two-step hydrothermal route prepared carbon dots (CDs) with terbium ions (Tb3+) in this contribution, a novel fluorescent probe with excellent properties such as highly physical and chemical stability, narrow emission and excitation wavelength-independent emission was prepared. The Tb3+ ions on the surface of CDs cannot only preserve the intrinsic fluorescence (FL) of CDs but also keep its own coordination capacity with rare earth complex, and thus the clamp structure (four phosphate groups) of ppGpp can specific bind...

Paper-based cultures are an emerging platform for preparing 3D tissue-like structures. Chemical gradients can be imposed upon these cultures, generating microenvironments similar to those found in poorly vascularized tumors. There is increasing evidence that the tumor microenvironment is responsible for promoting drug resistance and increased invasiveness. Acidosis, or the acidification of the extracellular space, is particularly important in promoting these aggressive cancer phenotypes. To better understand how cells respond to acidosis there is a need for 3D culture platforms that not only model relevant disease states but also contain sensors capable of quantifying small molecules in the extracellular environment. In this work, we describe pH-sensing optodes that are capable of generating high spatial and temporal resolution maps of pH gradients in paper-based cultures. This sensor was fabricated by suspending microparticles containing pH-sensitive (fluorescein) and pH-insensitive (diphenylanthracene) dyes in a polyurethane hydrogel, which was then coated onto a transparent film. The pH-sensing films have a fast response time, are reversible, stable in long-term culture environments, have minimal photobleaching, and are not cytotoxic. These films have a pKa of 7.61 ± 0.04 and are sensitive in the pH range corresponding to normal and tumorigenic tissues. With these optodes, we measured the spatiotemporal evolution of pH gradients in paper-based tumor models.

This work reports a microfabricated electrochemical paper-based analytical device (ePAD) for the voltammetric determination of DNA. The device is patterned by wax-printing on paper and features a circular assay zone connected to an inlet zone and a sink via grooved microfluidic channels for accelerated flow rate. An electrochemical cell with integrated electrodes is formed on the reverse side of the paper by sputtering of thin metal films (Sn, Pt and Ag as the working, counter and reference electrode, respectively). Proof-of-principle of the ePAD for biosensing is demonstrated for a DNA assay involving attachment of capture DNA, hybridization with biotinylated target oligonucleotide and labeling with streptavidin-conjugated CdSe/ZnS quantum dots (QDs). After the acidic dissolution of the QDs, the released Cd(II) is quantified by anodic stripping voltammetry (ASV) at the Sn-film working electrode. Thanks to the synergistic effects of QDs amplification, the inherent sensitivity of ASV and the excellent detection capabilities of the Sn-film working electrode for Cd(II), the target DNA can be detected at levels as low as 0.11 pmol L

Porous media made of nitrocellulose and glass fiber are common "paper" substrates for lateral flow assays, microfluidic paper analytical devices and other point-of-care diagnostic assays. Such assays commonly use optical labels such as gold nanoparticles, latex beads, or fluorescent nanoparticles to visualize the presence of analytes. Fluorescent labels are commonly used in bioassays to enhance sensitivity, but autoluminescence of the paper substrate worsens signal-to-noise ratios of fluorescence-based assays. To date, there exists no systematic investigation of autoluminescence wavelengths or lifetimes of porous membranes used in lateral flow assays. In response, we quantified the autoluminescence of commonly used porous materials across the visible spectrum via excitation-emission spectroscopy and time-resolved fluorescence spectroscopy, and demonstrate that autoluminescence is solely due to autofluorescence with lifetimes of about 5 ns in the visible spectrum. Counterintuitively, we found that spectroscopy alone does not provide sufficient information to select candidate paper substrates for fluorophore-labeled assays. Therefore, we developed a simple quantitative framework to select a low-fluorescence substrate that minimizes both the overlap of paper and fluorophore emission spectra and the fluorescence intensity on an imaging system of interest (such as a gel imager). Use of this framework was shown to lower the limit of detection of an influenza A nucleoprotein immunoassay by over 50%. The tools developed in this manuscript enable assay developers to screen appropriate, low-fluorescence porous substrates and enhance the sensitivity of membrane-based fluorescence assays.

A pyrene based amphiphilic receptor has been utilized in the nanomolar detection of uric acid at physiological pH in water. The compound shows a unique concentration-dependent modulation in optical response toward uric acid. In intramolecular/static excimer form (low concentration range), it displays a ratiometric response, while a "turn-off" sensing is observed specifically in the presence of intermolecular/dynamic excimer (high concentration range). The present protocol is then employed for the estimation of uric acid in blood serum samples of healthy individuals. Bland-Altman analysis in comparison to clinically approved uricase assay indicated the high accuracy of the present method. Additionally, the extent of insect infestation in stored grain samples was determined by measuring the uric acid content of their aqueous extracts. Low-cost color strips were developed for on-site detection of uric acid without involving any sophisticated instrument or trained personnel.