Search

Separation of blood plasma or serum from blood is essential for accurate analysis. Conventional blood separation requires instrumentation, reagents, and large sample volumes, limiting this process to laboratory environments with trained personnel. Full implementation of effective blood separation and analysis on microliter sample volumes for point of care (POC) diagnostics has proven extremely challenging resulting in a growing market demand, with common challenges such as expensive device fabrication processes or devices being comprised of materials which are not easily disposable. We developed a membrane-based wicking microfluidic device which is made using a simple fabrication process. This device uses a unique 3D flow channel geometry, fabricated in a polycaprolactone-filled glass microfiber membrane, to efficiently separate microliter sample volumes of blood. Colorimetric assay chemistries were integrated to demonstrate utility of these devices in POC diagnostics. The devices are capable of separating both fresh and anticoagulant-treated blood at microscale sample volumes (<15.0 μL). Modifications to the base device are also reported herein which increased sample volume capacity and separation efficiency. Integrated colorimetric assay enabled semi-quantitative detection of conjugated bilirubin in real blood samples (1.0–1.5 mg/dL). These blood separation devices, fabricated on polycaprolactone-filled glass microfiber, enabled effective blood plasma (anticoagulant-treated blood) and serum (fresh blood) separation with microscale sample volumes. Sample volume capacity and separation efficiency are customizable for specific applications and devices can be integrated with downstream assay chemistries to develop complete POC devices that offer blood separation and diagnostics at the same time on a single membrane. [ABSTRACT FROM AUTHOR]

A novel device of smart pipette has been suggested to extract and deliver plasma from whole blood in a disposable format. By operating an on-chip disposable micropump, approximately 30 μL of plasma was obtained from 100 μL of whole blood within 5 min without any external equipment for point-of-care blood analysis. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

Evaluation and diagnosis of blood alterations is a common request for clinical laboratories, requiring a complex technological approach and dedication of health resources. In this paper, we present a microfluidic device that owing to a novel combination of hydrodynamic and dielectrophoretic techniques can separate plasma from fresh blood in a microfluidic channel and for the first time allows optical real-time monitoring of the components of plasma without pre- or post-processing. The microchannel is based on a set of dead-end branches at each side and is initially filled using capillary forces with a 2-μL droplet of fresh blood. During this process, stagnation zones are generated at the dead-end branches and some red blood cells (RBCs) are trapped there. An electric field is then applied and dielectrophoretic trapping of RBCs is used to prevent more RBCs entering into the channel, which works like a sieve. Besides, an electroosmotic flow is generated to sweep the rest of the RBCs from the central part of the channel. Consequently, an RBC-free zone of plasma is formed in the middle of the channel, allowing real-time monitoring of the platelet behavior. To study the generation of stagnation zones and to ensure RBC trapping in the initial constrictions, two numerical models were solved. The proposed experimental design separates up to 0.1 μL blood plasma from a 2-μL fresh human blood droplet. In this study, a plasma purity of 99 % was achieved after 7 min, according to the measurements taken by image analysis. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]