Search

Chirality is a fundamental and ubiquitous property of nature involved in multiple fields of science. In particular, the possible resolution of the enantiomeric forms of a molecule is crucial in the pharmaceutical, food, and agrochemical industries. The search for efficient, broad-spectrum, and yet simple methods for obtaining enantiomerically pure substances is a current challenge. Enantioselective resolution methods rely on an asymmetric environment that allows the two antipodes of a chiral molecule to be distinguished. In addition to enantiomeric separation techniques, such as chromatography and electrophoresis, new promising approaches involving out-of-the-scheme synergistic effects between chiral selectors (CS) and external stimuli are emerging. This Trends article discusses different enantioselective mechanisms triggered by unconventional physicochemical stimuli for the design of avant-garde approaches that could offer novel perspectives in the field of chiral resolution. [ABSTRACT FROM AUTHOR]

The development of insulator-based dielectrophoresis chromatography is proposed here as a novel hybrid technique that capitalizes on the simplicity of insulator-based dielectrophoresis (iDEP) and the well-known chromatographic theory. Chromatographic parameters are employed to characterize dielectrophoretic separation of particles with particles being eluted from the system as enriched particle peaks. By varying the characteristics of the insulating posts, it was possible to manipulate the interactions of the particles with the insulating post array which acted as the stationary phase. The present work studied how the characteristics of the particles affected the particle retention. Different types of particles have distinct interactions with the post array; these interactions depend on particle properties (size, electrical charge, and polarizability). This work includes mathematical modeling with COMSOL and extensive experimentation. Particles ranging from 1 to 10 μm in diameter were tested for retention time and eluted as peaks in the iDEP chromatography devices. Separation results were reported in the form of dielectropherograms including the estimation of retention time (tR), separation efficiency (N/meter), and separation resolution (Rs). Two full separations were demonstrated: a separation by charge between two types of particles of similar size (~ 10 μm) with different electrical surface charges and a separation by size between 2- and 5-μm particles with similar surface charge (difference in ζP of 4 mV). The achieved separation resolutions were Rs = 1.8 and Rs = 3.5, respectively. This is the first study on DEP chromatography to assess performance in terms of resolution and separation efficiency, demonstrating the unique potential of iDEP chromatography. [ABSTRACT FROM AUTHOR]

Single-dimension separations are routinely coupled in series to achieve two-dimensional separations, yet little has been done to simultaneously exploit multiple dimensions during separation. In this work, simultaneous chromatography and electrophoresis is introduced and evaluated for its potential to achieve two-dimensional separations. In simultaneous chromatography and electrophoresis, chromatography occurs via capillary action while an orthogonal electric field concurrently promotes electrophoresis in a second dimension. A novel apparatus with a dual solvent reservoir was designed to apply the concurrent electric field. Various compounds were used to characterize the apparatus and technique, i.e., vitamins, amino acids, and dyes. Improved separation is reported with equivalent analysis times in comparison to planar chromatography alone. The feasibility of simultaneously employing chromatography and electrophoresis in two dimensions is discussed. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

Phosphatidylinositol 3-kinase (PI3K) signaling plays important roles in cell differentiation, proliferation, and migration. Increased mutations and expression levels of PI3K are hallmarks for the development of certain cancers. Pharmacological targeting of PI3K activity has also been actively pursued as a novel cancer therapeutic. Consequently, measurement of PI3K activity in different cell types or patient samples holds the promise as being a novel diagnostic tool. However, the direct measurement of cellular PI3K activity has been a challenging task. We report here the characterization of two fluorescent PIP derivatives as reporters for PI3K enzymatic activity. The reporters are efficiently separated from their corresponding PI3K enzymatic products through either thin layer chromatography (TLC) or capillary electrophoresis (CE), and can be detected with high sensitivity by fluorescence. The biophysical and kinetic properties of the two probes are measured, and their suitability to characterize PI3K inhibitors is explored. Both probes show similar capacity as PI3K substrates for inhibitor characterization, yet also possess distinct properties that may suggest their different applications. These characterizations have laid the groundwork to systematically measure cellular PI3K activity, and have the potential to generate molecular fingerprints for diagnostic and therapeutic applications. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

Nanoparticle-based material is a revolutionary scientific and engineering venture that will invariably impact the existing analytical separation and preconcentration for a variety of analytes. Nanoparticles can be regarded as a hybrid between small molecule and bulk material. A material on the nanoscale produces considerable changes on various properties, making them size- and shape-dependent. Gold nanoparticles (Au NPs), one of the wide variety of core materials available, coupled with tunable surface properties in the form of inorganic or inorganic-organic hybrid have been reported as an excellent platform for a broad range of analytical methods. This review aims to introduce the basic principles, examples, and descriptions of methods for the characterization of Au NPs by using chromatography, electrophoresis, and self-assembly strategies for separation science. Some of the latest important applications of using Au NPs as stationary phases toward open-tubular capillary electrochromatography, gas chromatography, and liquid chromatography as well as roles of run buffer additive to enhance separation and preconcentration in the field of chromatographic, electrophoretic and in chip-based systems are reviewed. Additionally, we review Au NPs-assisted state-of-the-art techniques involving the use of micellar electrokinetic chromatography, an online diode array detector, solid-phase extraction, and mass spectrometry for the preconcentration of some chemical compounds and biomolecules. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

Interactions between Intralipid dispersion and local anesthetics (bupivacaine, prilocaine, and lidocaine) were investigated. The amount of bupivacaine (the most cardiotoxic analyte of the local anesthetics studied) entrapped in Intralipid in the presence of plasma was studied using an off-line filtration and solid phase extraction method combined with capillary zone electrophoresis for quantification of free unbound bupivacaine. To confirm interactions between the analytes and Intralipid at lower concentrations, direct injection mass spectrometry was used. The use of immobilized Intralipid chromatography-atmospheric pressure ionization–ion trap mass spectrometry in the study of interactions between drugs and Intralipid dispersion is demonstrated. Finally, interactions between Intralipid dispersion and local anesthetics were investigated by electrokinetic capillary chromatography. The electrophoretic mobility of the Intralipid dispersed phase was calculated using the iterative procedure and a homologous series of alkyl phenyl benzoates (C1–C6), and the retention factors for the analytes were determined. [ABSTRACT FROM AUTHOR]

An extension of the unified equation of chromatography to directly access reaction rate constants k1 of first-order reaction in on-column chromatography is presented. This extended equation reflects different response factors in the detection of the reaction educt and product which arise from structural changes by elimination or addition, e.g., under pseudo-first-order reaction conditions. The reaction rate constants k1 and Gibbs activation energies $$ \Delta G^{ \ne } $$ of first-order reactions taking place in a chromatographic system can be directly calculated from the chromatographic parameters, i.e., retention times of the educt E and product P ( $$ t_{\text{R}}^{\text{A}} $$ and $$ t_{\text{R}}^{\text{B}} $$), peak widths at half height ( wA and wB), the relative plateau height ( hp) of the conversion profile, and the individual response factors fA and fB. The evaluation of on-column reaction gas chromatographic experiments is exemplified by the evaluation of elution profiles obtained by ring-closing metathesis reaction of N, N-diallytrifluoroacetamide in presence of Grubbs second-generation catalyst, dissolved in polydimethylsiloxane (GE SE 30). [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

During the past few decades, rapid growth in the applications of microfluidic systems to environmental analysis or environmentally related species has been observed. This review presents and critically discusses the published literature on the applications of microfluidic systems to real environmental samples or samples simulating environmental conditions. The subjects covered include integrated pretreatments, separation modes, detection methods and monitoring sensors used in these platforms. The main challenges in this field and the author’s perspectives on future directions for environmental analysis based on microfluidic systems are also proposed. [ABSTRACT FROM AUTHOR]

The article deals with the advances in the development of novel chromatography techniques for the high-throughput analysis of proteomes. It is beneficial to perform HPLC at elevated temperatures in a high-throughput two-dimensional high performance liquid chromatography (2D-HPLC) platform, because the resulting decrease in the viscosity of the mobile phase permits the employment of packing materials with small particle sizes, even at high flow rates. It also tackles the important role of capillary electrophoresis in the fast analysis of biomolecules.

We introduce a novel combination of boronic acid affinity chromatography with lectin affinity chromatography, dubbed as boronic acid–lectin affinity chromatography (BLAC). Concanavalin A and wheat germ agglutinin lectins were mixed with the pesudo-lectin boronic acid to form the BLAC affinity column and their performance was evaluated with standard glycoproteins. Optimization of the binding and elution buffers for the BLAC system is described. The BLAC columns were employed to isolate glycoproteins of interest using both selective and/or combined elution. [ABSTRACT FROM AUTHOR]

A new capillary electrochromatography (CEC) column for the simultaneous analysis of cationic, neutral, and anionic compounds using CEC-ESI-MS is described. Three different silica monolith columns were prepared by changing the poly(ethylene glycol) (PEG) contents for comparison of the separation property of these columns. Different separation programs were used for the simultaneous separation of different charged compounds under the same conditions. The column prepared with 80 mg of PEG separated typical compounds within 15 min using 1 M formic acid as the electrolyte. The analytes migrated in the order of cationic, neutral, and anionic compounds, which means that the migration order was mainly determined by the electrophoresis. The hydrodynamic flow by pressure from the inlet side was significant for a stable analysis to be achieved. The effect of the composition of the sheath liquid was also examined. All analytes (14 amino acids, thiourea, urea, citric acid, and ATP) were detectable when 1% acetic acid in 50% (v/v) methanol was used as the sheath liquid. [ABSTRACT FROM AUTHOR]

A rapid multiresidue method has been developed for the analysis of seven phenylurea herbicides in the presence of two s-triazines in environmental waters. A simple end-column electrochemical detector was used in combination with a commercially-available capillary electrophoresis instrument with UV detection. The determination of phenylurea pesticides using micellar electrokinetic capillary chromatography with electrochemical detection represents the first such determination that has been reported. In both detection systems, linear ranges were obtained for the seven phenylurea herbicides at concentrations lower than 2.0×10−5 mol l−1, in 0.020 mol l−1 phosphoric acid at pH 7.0 and containing 0.020 mol l−1 of sodium dodecylsulfate, in order to obtain selectivity in the additional separation by a micellar distribution process. Under these conditions a detection limit lower than 5.0×10−6 mol l−1 (0.25 pmol of pesticide) was achieved for most of them. The pesticides were resolved in less than 30 min. [ABSTRACT FROM AUTHOR]

Molecularly imprinted polymers (MIPs) are synthetic polymers with a predetermined selectivity for a given analyte, or group of structurally related compounds, that make them ideal materials to be used in separation processes. In this sense, it is not surprising that the first applications of MIPs were as tailor-made chiral stationary phases in liquid chromatography. However, peak broadening and tailing, especially of the more retained enantiomers, were observed. Accordingly, this paper gives an overview of the attempts carried out during the recent years to improve the chromatographic performance of MIPs in liquid chromatography and capillary electrophoresis as well as the more recent applications. We conclude that MIPs are very promising materials to be used as selective stationary phases in chromatography although further developments are necessary in order to fully exploit their potential. [ABSTRACT FROM AUTHOR]

In multidimensional separations, two or more independent separation methods are coupled in an effort to resolve complex mixtures. The displacement mechanisms of each method should be orthogonal, such that little correlation exists between the retention of compounds in each dimension. When multiple orthogonal separation methods are coupled such that all sample components are subjected to complete analysis on all dimensions, the method is considered “comprehensive”. The primary advantage of comprehensive multidimensional separations over their one-dimensional counterparts is the potential for dramatically enhanced resolution. High resolving power can be achieved because the peak capacity of a comprehensive multidimensional separation is roughly equal to the product of the individual peak capacities of each dimension. In this review, the theory and instrumentation of two-dimensional liquid chromatography (LC-LC) and liquid chromatography-capillary electrophoresis (LC-CE) separations are discussed. Some applications of these techniques to the separation of biological molecules are highlighted. Future directions for the development of multidimensional separations are also considered. [ABSTRACT FROM AUTHOR]

The article discusses the bioanalytical methods used in the Bachelor of Science (BSc) analytical chemistry curriculum. It explains the goal of analytical chemistry course, along with an overview of the basic BSc analytical chemistry curriculum. The bioanalytical methods that were found to be included in analytical chemistry curriculum are enzymatic methods, immunoanalytical methods and the separation of biomacromolecules by electrophoresis and chromatography.