Search

Carbon fiber paper (CFP) is commonly used as a proton exchange membrane in fuel cells due to its prominent areal electrosorption capacity, exceptional conductivity and excellent chemical stability. In this paper, we first explored the feasibility of carbon fiber paper as a specific paper substrate in paper spray ionization mass spectrometry (PSI-MS). The results demonstrated that CFPSI-MS combines the merits of PSI and carbon fiber ionization (CFI) and exhibits better performance of various compound analyses than either of these techniques alone. The application of CFP can highly enhance the signal stability and detection sensitivity of a diverse array of analytes, especially in negative ionization mode. The ion intensity of target analytes such as saccharides and flavonoids was improved 2-90-fold. Many nonpolar/low-polarity analytes, such as polycyclic aromatic hydrocarbons, which are difficult to ionize by traditional PSI-MS, were successfully detected by CFPSI-MS with a 2.5 kV high voltage. Moreover, CFPSI-MS presents high sensitivity in semiquantitative analysis, and the limits of detection (LODs) of cyclic adenosine monophosphate (CAMP), naringin and tivantinib in whole blood were improved 2-100-fold compared to those in traditional PSI-MS. In real sample analysis, CFPSI-MS also exhibits excellent capability in human breath analysis and blood metabolomic profiling.

In the current study, we have utilized semi-enclosed, leak-proof, microfluidic paper-based analytical devices (μPAD's) modified with isatin conjugated chitosan as specific colorimetric reagent for the detection of proline. Proline is one of the globally accepted stress biomarker in plants and also one of the prominent amino acid present in wine and some processed food. Quantification of proline is regularly required in agriculture field, food and wine industries. Specific interaction of isatin with proline, uniform film forming ability of chitosan which results in uniform coloration and the presence of leak-proof layer which prevent the diffusion of colorimetric reagent deeper resulted in enhancement of color signal intensity at the reaction zone were utilized. Further, the images of the μPAD's were captured using smartphone with 3D printed imaging box which houses smartphone and μPAD's. This platform utilizes smartphone flash for uniform illumination and ensures constant positioning of μPAD's to capture images. This greatly enhances the sensitivity and accuracy of our platform. Compared to previously published highly sensitive multi-layer, paper-based platform for detection of proline, current method has enhanced detection range (∼7 fold) and has comparable limit of detection of 23.75 μM. Moreover, the developed μPAD's platform has reduced optimum reaction temperature and time compared to previous work. The developed paper based platform was utilized for evaluation of proline content in young Arabidopsis plants which are subjected to water stress for 5 days. The devised paper-based methods have the potential to be applicable for the on-site evaluation of various stresses in plants.

There is growing demand for simple to operate, sensitive, on-site quantitative assays to investigate concentrations of drug molecules in pharmaceutical preparations for quality assurance. Here, we report on the development of two colorimetric analysis methods for the study the antibiotic doxycycline hyclate (DOX) and the nasal decongestant oxymetazoline hydrochloride (OXY), in solution as well as in their respective formulations. We compare a UV/vis spectrophotometry method with a color change recorded on a microfluidic paper-based analytical device (μPAD). Detection is based on the pharmaceutical compounds coupling with diazotized 4-aminoacetophenone (DAAP) under alkaline conditions to produce colored azo-dye products. These azo-compounds were monitored by absorbance at 425 nm for DOX and 521 nm for OXY, with linear calibration graphs in the concentration range of 0.5–35 mg L−1 (DOX) and 1.0–40 mg L−1 (OXY) and limits of detection of 0.24 mg L−1 (DOX) and 0.32 mg L−1 (OXY). For the μPAD method, color intensity was measured from photographs and a linear increase was observed at concentrations from above approximately 15 mg L−1 for both compounds and up to 35 mg L−1 for DOX and 40 mg L−1 for OXY. The developed methods were also applied to the formulated pharmaceuticals and no interference was found from the excipient. Thus, the paper-based device provides an inexpensive, simple alternative approach for use outside centralized laboratories with semi-quantitative capability.

Xenoestrogens exert antiandrogenic effects on the human androgen receptor. In the analytical field, such antagonists block the detection of testosterone and falsify results obtained by sum parameter assays. Currently, such agonistic versus antagonistic effects are not differentiated in complex mixtures. Oppositely acting hormonal effects present in products of everyday use can only be differentiated after tedious fractionation and isolation of the individual compounds along with subjection of each fraction/compound to the status quo bioassay testing. However, such long-lasting procedures are not suited for routine. Hence, we developed a fast bioanalytical tool that figures out agonists versus antagonists directly in complex mixtures. Exemplarily, 8 cosmetics and 15 thermal papers were analyzed. The determined antagonistic potentials of active compounds found were comparable to the ones of known antagonists (in reference shown for bisphenol A, 4-n-nonylphenol and four parabens). Relevant biological/chromatographic parameters such as cell viability, culture conditions, dose response curves, limits of biological detection/quantification and working range (shown for testosterone, dihydrotestosterone, nandrolone and trenbolone) were investigated to obtain the best sensitivity of the biological detection. The developed and validated method was newly termed reversed phase high-performance thin-layer chromatography planar yeast ant-/agonistic androgen screen (RP-HPTLC-pYAAS bioassay). Results were also compared with the RP-HPTLC-Aliivibrio fischeri bioassay (applied on RP plates for the first time). As proof-of-concept, the transfer to another bioassay (RP-HPTLC-pYES) was successfully demonstrated, analogously termed RP-HPTLC-pYAES bioassay detecting anti-/estrogens (exemplarily shown for evaluation of 4 pharmaceuticals used in breast cancer treatment). The new imaging concept provides (1) detection and differentiation of individual agonistic versus antagonistic effects in the bioprofiles, (2) bioanalytical quantification of their activity potential by scanning densitometry and (3) characterization of unknown bioactive compound zones by hyphenation to high-resolution mass spectrometry. Depending on the hormonal bioassay, 15 samples were analyzed in parallel within 5 h or 6 h (calculated as 20 or 24 min per sample). For the first time, piezoelectric spraying of the yeast cells was successfully demonstrated for the planar yeast–based bioassays.

Integration and storage of bioactive reagents is an important and challenging task in microfluidic paper-based analytical devices (μPADs). Here, we developed a convenient and universal method to store proteins and preserve their activities in μPADs by using aqueous two-phase systems (ATPs) evolved film. A polyethylene glycol (PEG)-dextran (DEX) double-layer film was formed through dehydration of ATPs. Functional biomolecules were stored in the bottom DEX layer on the basis of the biased partitioning and rehydrated conveniently by simple addition of buffer solution at usage. As a demonstration, enzyme immunoassay (EIA) of carcinoembryonic antigen was performed successfully on μPAD integrated with antibodies. Even after 104 days of storage at 4 °C and ambient conditions, the EIA signal just lost less than 10% and 30%, which meet the storage requirements of invitro diagnosis reagents. The ATPs evolved double-layer film has double functions of stabilization and insulation, and provide a high efficiency of biomolecule preservation, thereby promoting the applications of μPADs in POC diagnostic assay.

Polygalacturonase (PG) activity in plants can serve as an important index for plant disease. However, the conventional method to detect PG activity is a complex process and requires a skilled technician and expensive analytical equipment. In this study, a paper-based colorimetric sensor was developed based on the principle of the ruthenium red (RR) dye method for easy and simple measurement of PG activity. The proposed paper-based sensor has a three-layer structure for detection of PG activity in samples. The sensor sensitivity was enhanced by optimizing the pH of the sodium acetate buffer used in polygalacturonic acid (PGA)-RR complex formation and the reaction temperature for PG and the PGA-RR complex. Further, for quantitative analysis of PG activity, Delta RGB analysis was conducted to detect color changes in the sensing window of the sensor. Results presented that the linear measurement range of the paper sensor was 0.02-0.1 unit with the limit of detection of 0.02 unit, which showed a similar detection range, but a lower detection limit, compared to the spectrophotometry. Furthermore, PG activity based on culture condition was measured using samples from Sclerotium cepivorum to verify the potential application of the developed paper-based sensor in the field. The measured activity showed no statistically significant difference from the values obtained from the spectrophotometry at 95% confidence level. Therefore, the paper-based colorimetric sensor can be used to predict plant diseases in Allium crops during the stage of pathogen invasion, potentially contributing to the improvement of crop production.

Paper-based microfluidic device was designed with wax-printing to combine potentiometric, fluorimetric and colorimetric detection zones. This newly developed trimodal paper chip has been used for on-site determination of ketamine hydrochloride (KET) as a date rape drug in beverages. The device employed polyaniline nano-dispersion as conducting polymer in ion sensing paper electrodes designed to fit USB plug connector. Carbon dots-gold nanoparticles and cobalt thiocyanate were used in fluorescence and color detection zones, respectively. Cellular phone's camera facilitated the on-site fluorimetric and color detection. The implemented trimodal detection system exhibited specificity for KET detection in the presence of several other beverage interferences i.e., biogenic amines. This innovative sensor brings together analytical figures of merit for effective KET detection in single aliquot of spiked beverages. The proposed paper-based chip also fulfils WHO criteria for point-of-care devices posing the proposed trimodal paper device as an active part for rapid, on-site drug diagnostics and to be applied further for other similar drugs.

Free proline, termed proline, is a biomarker used for diagnosing drought stress in plants. A previously developed proline–ninhydrin reaction-based paper sensor could quickly and easily detect proline, but it was limited by low sensitivity. In this study, we developed an enclosed multilayer paper-based microfluidic sensor with high sensitivity for the quantitative detection of proline in plants. The multilayer paper-based sensor was manufactured using simple wax printing and origami methods, and contained an internal mixing channel to allow good mixing of the proline with ninhydrin, increasing the proline–ninhydrin reactivity and providing accurate and sensitive proline detection. By preloading ninhydrin onto the sample loading area, uniform coloration of the sensing window was achieved, allowing quantitative analysis of various proline concentrations using a constant reaction time. Only the sensing window and sample loading area were exposed to limit sample evaporation and contamination from the external environment. The LOD of the fabricated sensor was 23 μM, which is approximately 29-fold lower than that of the previously proposed paper sensor (657 μM). Samples were extracted from A. thaliana plants subjected to drought stress for proline detection. The proline concentrations measured using the developed paper sensor and a spectrophotometric method were not statistically significant at a confidence level of 95%. Therefore, the developed sensor can be applied to measure proline concentrations precisely in the field with a low detection limit. The developed paper-based sensor can be used to detect the early stages of drought in plants and thus improve crop productivity.

The incompatibility of most organic solvents with acetylcholinesterase (AChE) inhibition assay normally limits pesticide extraction efficiency in sample pretreatment, which might cause false negatives in real world sample assessment. Herein, a novel method has been developed for an improved AChE inhibition assay via organic solvent extraction combined spontaneous in situ solvent evaporation on microfluidic paper-based analytical devices. Enzyme pre-immobilization procedure was spared and AChE was added to the system after sampling step until a complete in-situ solvent evaporation process was performed on chip. IC50 levels of the six investigated organophosphate and carbamate pesticides indicated a completely eliminated influence of solvents on AChE behavior with the new method. Most importantly, analytical performances were significantly improved in food sample measurements. Reduction in matrix effect was observed when acetonitrile was adopted for lettuce sample pretreatment instead of water. Studies on different pesticides suggested a remarkably decreased discrimination effect on recoveries from sample pretreatment with the new developed method. The recovery level for phoxim spiked head lettuce samples reached (107.5 ± 14.2) %, in comparison with that of (18.6 ± 1.4) % from water-based extraction. Spiked water and apple juice samples with carbaryl concentration of as low as 0.02 mg L−1 were also successfully recognized with the present method by visual detection. This is the first report on direct sampling of organic extracts for AChE inhibition assay on-chip and it might provide a new perspective for real world sample assessments involving bio-reagents.

This work presents a novel development that exploits the concept of in-situ gas-separation together with a specific enzymatic colorimetric detection to produce a portable biosensor called “Blood Alcohol Micro-pad” for direct quantitation of ethanol in whole blood. The thin square device (25 mm × 25 mm × 1.8 mm) comprises two layers of patterned filter paper held together with a double-sided mounting tape with an 8-mm circular hole (the headspace). In operation, the reagent is deposited on one layer and covered with sticky tape. Then 8 μL of a blood sample is dispensed onto the opposite layer and covered with sticky tape. Diffusion of ethanol across the 1.6 mm narrow headspace permits selective detection of ethanol by the enzymatic reagents deposited on the opposite layer. This reagent zone contains alcohol oxidase, horseradish peroxidase and 2′-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt, as the chromogenic reagent. The color intensity, measured from the recorded digital image, resulting from the enzymatic assay of ethanol, correlates with the concentration of blood alcohol. The results obtained with spiked mice and sheep blood samples, using an external calibration in the range of 1–120 mg dL−1ethanol, gave recoveries of 93.2–104.4% (n = 12). The “Blood Alcohol Micro-pad” gave good precision with %RSD

Cytochrome P450 (CYP450), and in particular CYP3A4, is the most abundantly expressed CYP450 isozyme implicated in many drug-drug and medicinal plant-drug interactions. Therefore, incorporation of CYP3A4 enzyme screening at an early stage of drug discovery is preferable in order to avoid enzymatic interactions. Here we present for the first time a paper-based CYP3A4 immobilized sol-gel-derived a platform using resorufin benzyl ether as a fluorogenic enzyme substrate used to investigate enzyme activity. The fluorescence intensity of the product can be simply quantified by using a handheld digital microscope and an image analysis software. The limit of quantitation was 0.35 μM with good precision (RSDs 0.05), while offering simplicity and lower cost. Kinetic parameters of the immobilized CYP3A4 in sol-gel coated paper were calculated from the Lineweaver-Burk plot, including Michaelis constant (Km) and maximum velocity (Vmax), which were 2.71 ± 0.35 μM and 0.43 ± 0.05 μM/min, respectively. Moreover, a functional test of these devices was conducted by assessments of known CYP3A4 inhibitors (i.e. ketoconazole, itraconazole) and inducers (i.e. phenytoin, carbamazepine). To further demonstrate the broad range of uses, the devices were utilized to assay plant extracts i.e. Areca catechu seeds, Camellia sinensis leaves, Eclipta prostrata aerial part, providing results in good agreement with previous studies. Furthermore, the sol-gel immobilized enzyme stored at 4 °C can increase storage stability, offering the activity of 86.3 ± 0.4% after 3-weeks storage, equivalent to the activity of the free enzyme solution after 1-week storage. The developed paper-based devices offer versatility, portability and low-cost.

A novel 3D paper-based microfluidic screen-printed electrode (SPE) composed of two layers was constructed by photolithography and screen-printing technology. Aldehyde functionalized hydrophilic zone of the counter and reference electrodes layer was prepared for glucose oxidase immobilization. Highly conductive Prussian blue deposited reduced graphene oxide-tetraethylene pentamine (rGO-TEPA/PB) modified paper working electrode layer can be used as an electrochemical sensitive membrane for quantitative detection of hydrogen peroxide (H2O2), which was the enzyme-catalyzed reaction product. Therefore, this 3D paper-based microfluidic electrochemical biosensor can be used for quantitative detection of glucose. Under optimum conditions, the proposed biosensor can be used for quantitative determination of glucose over a wide linear range of 0.1 mM∼25 mM with detection limit of 25 μM. Finally, the 3D paper-based microfluidic electrochemical biosensor was applied to determine glucose in human sweat and blood, and the obtained results were in good consistency with values measured by Roche's blood glucose meter. In addition, the proposed 3D paper-based electrochemical device showed good repeatability, stability, and anti-interference, which would be of great potential to monitor glucose in complex biological fluids.

Herein, the applicability of electromembrane extraction (EME), as an efficient and paper-compatible separation technique, was envisaged over customized microfluidic paper-based analytical devices (μPADs). The utility of EME was assessed on 2D planar and 3D origami structures using different types of electrodes including stainless steel and paper-based electrodes. The overall separation procedure was integrated to colorimetric detection demonstrated for copper ions as the model analyte. According to the obtained results, EME based on 3D design of μPADs could effectively be performed under low applied voltage. Using 3D architecture, the analyte could be quantified within the range of 40.0-1500.0 μg L

Rising concern about the use of non-permitted colourants, in common food items such as dals and green vegetables sold in Indian markets, have led to a demand for low-cost point-of-use chemical analysis tools. Conventional food-analysis techniques involving tedious sample preparation protocols are not suited for in-field applications. Surface Enhanced Raman Spectroscopy (SERS) is an analytical technique that is well-suited for point-of-use chemical analysis with molecular level detection capability, which can also serve as a quality assurance tool for businesses. Effective and rapid signal collection from a large-area sample within a field-setting using disposable, low-cost SERS substrates is a key challenge in implementing such a solution. Herein, we demonstrate the use of inkjet-printed thin films comprising of robust nanostructured-silver as flexible, paper-based SERS (P-SERS) swabs for the direct detection of Metanil Yellow (MY) from toor dal (yellow split pigeon peas) samples and Malachite Green (MG) from green peas and green chillies. The macroscopic uniformity of these thin-films in combination with a portable Raman spectrometer equipped with orbital raster scanning (ORS™) technology for signal collection results in an unprecedented precision (RSD ∼ 1.6%) upon characterizing samples saturated with Rhodamine-6G (R6G), a standard Raman probe. As several food-cleansing products have appeared in the marketplace, the adulterant removal efficacy of some commercially available ‘washes’ as well as products such as ‘ozoniser’, which was determined by SERS characterization of swabs before and after use, is also reported.

A novel all-in-one paper-based sampling concept for mass spectrometric bottom-up protein analysis is here demonstrated in a chip format integrating instant immunocapture, protein reduction, - alkylation and tryptic digestion all in-device. Conventional laboratory grade filter paper was coated with the polymer 2-hydroxyethyl methacrylate-co-2-vinyl-4,4-dimethyl azlactone (pHEMA-VDM) with a subsequent covalent immobilization of the monoclonal antibody E27 targeting the biomarker human chorionic gonadotropin (hCG). In-device protein reduction and alkylation was optimized with regards to reagent concentration and reaction pH. The sampling concept showed a high degree of performance between 10 and 1000 ng/mL (R2 > 0.99) by a five-point calibration curve sampled with hCG spiked to human serum samples and freshly collected whole blood samples, respectively. LOD (experimentally obtained at 100 pg/mL (2.64 pM/0.9 IU/L)) was demonstrated to be up to ten times lower with more than six times faster sample preparation than what has previously been reported for on-paper analysis of hCG in human serum samples.

The current work describes the development of a "nanopaper-based analytical device (NAD)", through the embedding of curcumin in transparent bacterial cellulose (BC) nanopaper, as a colorimetric assay kit for monitoring of iron and deferoxamine (DFO) as iron-chelating drug in biological fluids such as serum blood, urine and saliva. The iron sensing strategy using the developed assay kit is based on the decrease of the absorbance/color intensity of curcumin-embedded in BC nanopaper (CEBC) in the presence of Fe(III), due to the formation of Fe(III)-curcumin complex. On the other hand, releasing of Fe(III) from Fe(III)-CEBC upon addition of DFO as an iron-chelating drug, due to the high affinity of this drug to Fe(III) in competition with curcumin, which leads to recovery of the decreased absorption/color intensity of Fe(III)-CEBC, is utilized for selective colorimetric monitoring of this drug. The absorption/color changes of the fabricated assay kit as output signal can be monitored by smartphone camera or by using a spectrophotometer. The results of our developed sensor agreed well with the results from a clinical reference method for determination of Fe(III) concentration in human serum blood samples, which revealed the clinical applicability of our developed assay kit. Taken together, regarding the advantageous features of the developed sensor as an easy-to-use, non-toxic, disposable, cost-effective and portable assay kit, along with those of smartphone-based sensing, it is anticipated that this sensing bioplatform, which we name lab-on-nanopaper, will find utility for sensitive, selective and easy diagnosis of iron-related diseases (iron deficiency and iron overload) and therapeutic drug monitoring (TDM) of iron-chelating drugs in clinical analysis as well.

Driven by a bright prospect for rapid, portable and cost-effective point-of-care testing, an assembled Pasteur pipette device to integrate nucleic acid extraction, amplification and detection was developed to detect B. cereus in a sample-to-answer format. Denaturation Bubble-mediated Strand Exchange Amplification (SEA) was chosen to perform isothermal amplification because it requires only a pair of primers and one Bst DNA polymerase. The established SEA can detect as low as 1.0 × 10−13 M genomic DNA of B. cereus, which was comparable with the previously reported method for B. cereus detection. The assembled Pasteur pipette allows sample-to-answer diagnostic in a simple, low-cost, portable, and disposable format. The inherent function of Pasteur pipette enables direct liquid handling without the need of extra pipettes, syringes or pumps. Visual readout was achieved by using a pH sensitive dye, further simplifying result judgment process. The detection limit for B. cereus is 1.0 × 104 CFU/mL in pure cultures, while the detection limit in artificially contaminated milk is 1.0 × 105 CFU/mL without enrichment and 1.0 × 100 CFU/mL following 12 h enrichment. Considering that typical cell counts in food samples associated to food poisoning are 1.0 × 105 to 1.0 × 108 CFU per gram/milliliter B. cereus, our Pasteur pipette is enough sensitive for answer-to-sample diagnosis of B. cereus even directly from foods without enrichment. The whole diagnostic procedure could be completed within 50 min, dramatically decreasing the detection time. In a word, the assembled Pasteur pipette device, combined with a homemade metal bath, possesses great potential for sample-to-answer application in resource-limited settings.

Field-amplified stacking (FAS) is a commonly used method for enhancing the sensitivity of charged species from low conductive media in capillary electrophoresis. FAS also showed significant sensitivity enhancement effect on a uniform paper fluidic channel by proper design of the electrolyte. In this paper, a novel method of introducing electric field gradient is proposed by geometry design of a 2D paper fluidic channel, and field amplification effect was successfully demonstrated with reduced requirement on the sample's conductivity. Sensitive colorimetric detection of microalbuminuria (MAU) from urine samples was demonstrated by mobile phone camera. Experimental results showed that, with active electric field motivation, up to 93.5% of the loaded protein probe could be effectively transferred and stacked into a narrow band on the newly designed paper fluidic channel. A limit of detection (LOD) of 6.5 mg‧L−1 HSA was achieved with a dynamic range of 10–300 mg‧L−1 (linear in the range of 10–100 mg‧L−1, R2 = 0.991). Combined with selective staining of albumin with bromophenol blue (BPB), the established method was applied to the detection of MAU from clinical urine samples, and consistent results with that of the clinical method were obtained. With this paper-based analytical device (PAD), MAU from highly conductive urine samples can be directly loaded and detected without any pretreatment. This method provides a way to develop highly sensitive point-of-care test (POCT) for rapid screening of some diseases.

The adulteration of herbal medicines by dexamethasone or prednisolone is regarded as a serious problem in many communities. Herein, a novel platform for the separation and quantification of both target steroids in herbal medicines based on electrochemical paper-based analytical devices (ePADs) has been created. The ePAD was composed of Whatman SG81 chromatography paper, 3D-printed devices and a commercial screen-printed electrode. Whatman SG81 silica-coated paper was used for the separation of dexamethasone and prednisolone based on the difference in their partition coefficients during the flow of the mobile phase. The optimal mobile phase was composed of 60% ethyl acetate in cyclohexane and required 7 min for separation. The separated steroids on the paper were then quantified by electrochemical detection using differential pulse voltammetry, in which the 3D-printed devices facilitated the measurement. Analytical detection ranges of 10–500 μg mL−1 were obtained for both dexamethasone and prednisolone (r2 = 0.988 and 0.994, respectively). The limits of detection for dexamethasone and prednisolone were 3.59 and 11.98 μg mL−1, respectively, whereas the limits of quantification were 6.00 and 20.02 μg mL−1, respectively. The amounts of both target steroids derived from real herbal medicine samples determined by the proposed method were comparable to those obtained with assays using standard high-performance liquid chromatography. In addition, a simple evaporation step can be used to increase the concentration of the samples before analysis. These ePADs are simple, low-cost, rapid, and very promising for on-site quantitative detection.

In situ identification and quantification of unsaturated fatty acid (FA) C=C positional isomers in human serum is herein performed by negative-ion paper spray (PS) mass spectrometry. Typically, by direct application of an alternating current (AC) voltage to the wet paper, the PS ionization could perform stably in the negative-ion mode without severe discharge. We suppose epoxidation reaction between unsaturated C=C bonds and reactive oxidative species might be initiated by a mild electrical discharge, which could be rapidly and controllably produced via a low amplitude AC voltage. Upon collision-induce dissociation (CID), the epoxide was fragmented to generate diagnostic ions indicating the C=C location. The intensity of the characteristic product ions could also be used for absolute quantification of the FA C=C positional isomers. The limits of detection (LODs) and limits of quantification (LOQs) were roughly in the range of 0.0178–0.0506 μM and 0.0218–0.3634 μM for standard FAs. Without the additional sample preparations or reactive chemical reagents, epoxidation of unsaturated FAs and ionization of the epoxide could be achieved in one-step by negative-ion mode PS, which enable a promising methodology for on-site clinical diagnosis.

A simple paper-based analytical device (PAD) has been developed to rapidly detect formaldehyde (FA) in food samples. The analysis was based on sulfite assay where FA reacted with excess sulfite to generate sodium hydroxide (NaOH) that was quantified on PAD using acid-base titration. The PAD consisted of a central sample zone connected to ten reaction and detection zones. All detection zones were pre-deposited with polyethylene glycol (PEG) with phenolphthalein (Phph) as an indicator. Reaction zones contained different amounts of the titrant, potassium hydrogen phthalate (KHP). On flowing into reaction zones, the NaOH product reacts with KHP to reach the end point. In the presence of excess NaOH, unneutralized NaOH reached the detection zone and caused Phph color change from colorless to pink. In contrast, when NaOH was less than KHP, the detection zone remained colorless. Concentration of FA can be quantified from the number of pink detection zone(s) which were correlated with a known amount of pre-deposited KHP on the PAD. Total analytical process could be completed within 5 min. Areas of each zone and amounts of reagents added to the corresponding zones of the PAD were optimized to obtain reproducible and accurate results. PAD gave ranges of FA detection of 100–1000 mg L−1 with an interval of 100 mg L−1 and the limit of detection (LOD) was 100 mg L−1. PADs were stable for up to a month under dark and cold conditions. Analysis of FA in food samples using PAD agreed well with those from the classical sulfite assay.

In most cases, three-dimensional paper-based microfluidic analytical devices (3D-μPADs) were fabricated manually by stacking or folding methods. For the first time, digital light processing stereolithography (DLP-SLA) 3D printing technology was adopted to automatically make 3D-μPADs. In the fabrication process, a printing pause was set between two layers to allow paper to be placed in the resin tank. The resin on the fresh paper spontaneously bonded to the former cured paper layer during curing, thus realizing the automatic bonding and alignment between different layers of paper and avoiding the human participation and errors as in stacking and folding methods. There was a gap between two vertical aligned flow paths, therefore the liquid did not flow spontaneously from the upper layer to the lower layer. Most of the fluid flow in 3D-μPADs was spontaneous or manually activated, which was not conducive to complex assays that require different regents to be delivered sequentially. Herein, we used an electric field or airflow to trigger the fluid flow and demonstrated the flow controllability by a proof-of-concept colorimetric assay. The limits of detection of glucose and albumin were 0.8 mM and 3.5 μM, respectively, which were sufficient for clinical requirements. Given the characteristic of flow controllability, we believe that the proposed 3D-μPADs have great potential to make paper-based complex assays automated and programmable.

A new highly selective and sensitive dual-mode sensor 3TD based on the conjugate of oligothiophene and barbituric acid moiety was developed for colorimetric and turn-on fluorescent detection of CN─. The sensor 3TD exhibited high specificity towards CN─ by interrupting its own ICT producing thereupon a large blue-shift in UV–Vis spectrum and remarkable “turn-on” fluorescence emission. The detection limit was 2.26 × 10─7 M, which is quite lower than the permissible level of CN─ in drinking water according to the WHO. The fluorescent detection of CN─ was well demonstrated by filter paper strips and silica coated TLC plates. Moreover, the sensor was also used to detect CN─ in environmental water and agro-products with satisfactory results. Most importantly, in terms of these advantages of colorimetric and turn-on fluorescent dual-mode, immediate response, excellent selectivity, high sensitivity, low cytotoxicity, and good biocompatibility, the sensor 3TD was successfully applied into CN− imaging in living cells, demonstrating its excellent value in practical application.

Chloride (Cl-) is an inorganic anion present in a broad range of samples (e.g. biological, environmental, food, water, etc.), the determination of which is of widespread significance. In this work, we translate the well-established traditional argentometric method (Mohr's precipitation titration) into a small, simple, portable, and low-cost paper-based microfluidic diagnostic device, which provides rapid and quantitative analysis. The developed device enables the determination of chloride sample volumes as small as 5 μL. A distance-based detection method is implemented providing fully instrument-free quantitation. The beneficial effects of channel geometry (variable widths with constant heights) on analytical parameters were investigated. Trapezoidal channels (channel width changes linearly with height) were used to create a gradient of paper surface (titrant) available for the reaction, compared to the typical uniform rectangular channels (constant channel width). The trapezoid with increasing width offered higher sensitivity and lower detection limits (i.e. 0.05 mM vs 0.1 mM from the rectangular channel) for chloride determination across the concentration range of 0.05-25 mM. In addition, the effect of concentration of the deposited reagent on the obtained distance signals was investigated using varying concentrations of titrant (AgNO3), which allowed determination of chloride across a wider dynamic range (up to 200 mM). The utility of the paper devices was demonstrated by determination of chloride in a variety of matrices including body fluids (sweat, serum, and urine) and water samples (drinking, mineral, river water).

The facile detection of phosphopeptides is important for clinical screening and phosphoproteomic research. This work develops an instrument-free, cost-effective, convenient paper-based method for quantitative analysis of phosphorylated peptides. With a novel portable device, Phos-PAD, this method can achieve selective enrichment and colorimetric detection of phosphopeptides within 15 min TiO2 nanoparticle-based chemisorption and tetrabromophenol blue-based colorimetric assay were integrated into the single paper-based analytical device. The color change can indicate the presence of phosphopeptides and the mean pixel intensity of the red channel can be used for phosphopeptide quantification. With capability of quantifying phosphopeptides in serum samples, this Phos-PAD assisted phosphopeptide assay may attract significant attention to clinical analysis of endogenous serum phosphopeptides.

In this paper, simultaneous enrichment and separation of ions and amphoteric components were successfully demonstrated by using electric field (E) and pH gradient (double gradient) in the ion depletion zone of anion concentration polarization interface established on a paper fluid channel. Experimental results were visualized with colored ions (bright blue and amaranth) and protein probes (phycocyanin and cytochrome C). With optimization, colored phycocyanin and bovine hemoglobin with similar pI as that of albumin and immunoglobulin respectively were well separated in 900 s with 10-fold enrichment effect. Based on the separation and enrichment function of this paper-based analytical device (PAD) and rapid selective staining of human serum albumin (HSA) with bromophenol blue, a rapid colorimetric detection of HSA was implemented with smartphone camera. A limit of detection (LOD) of 5.2 mg·L

This paper describes the development of two microfluidic paper-based analytical devices (μPADs), one well-based and the other based on a lateral flow assay (LFA) configuration, to detect glucose via a colorimetric assay using the solid metal-organic framework (MOF) Zr-PCN-222(Fe), to encapsulate glucose oxidase (GOx). The well-based platform consisted of laminate sheets and multiple layers of wax-printed chromatography paper. Solutions of KI and glucose placed into the well flowed through the device and reacted with the GOx@MOF species sandwiched between the paper layers realizing a yellow-brown color. The LFA platform consisted of chromatography paper between parafilm and polyvinyl acetate (PVA) layers. GOx@MOFs spotted on the paper subjected to solutions of KI and glucose yielded a brown color. The devices were then dried, scanned, and analyzed yielding a correlation between average inverse yellow intensity and glucose concentrations. The development of these devices employing MOFs as biomimetic catalysts should further expand the applications of microfluidic technologies for sensors a variety of analytes.

This work demonstrates a sensitive and rapid method for the detection of antibiotic residues in food samples by employing the filtration behaviour of paper combined with aggregation and precipitation of chemical reagents. Using this concept, we successfully determined the presence of oxytetracycline and norfloxacin residues in pork using metal complexation on microfluidic paper-based analytical devices (μPADs). The base substrate (top layer of the device) was fabricated by printing letter channels of the words “oxytetracycline” and “norfloxacin” before functionalization with copper (II) sulfate pentahydrate in 0.5 M sodium hydroxide and iron (III) nitrate nanohydrate in 5 mM ammonia solution for the detection of oxytetracycline and norfloxacin separately. A transition metal hydroxide formed upon reaction that created solid precipitates on paper and allowed antibiotic residues to bind to the metal ions via coordination chemistry. The metal ion-antibiotic complex could form on the filter paper and generated a visible color change with the detection limit of 1 ppm for both oxytetracycline and norfloxacin in pork. This procedure of filtration and concentration in combination with a simple text-reporting approach allows the end users to achieve a low limit of detection as well as easy result interpretation in food safety monitoring. usc Refereed/Peer-reviewed

A paper-based colourimetric assay for the detection of alanine transaminase has been developed. In the presence of alanine transaminase, 2,4-dinitrophenyl hydrazine changes to pyruvate hydrazone leading to a colour change from pale yellow to dark yellow. Reaction conditions were optimized using absorption spectroscopic studies. Hydrophobic patterns on the Whatman chromatographic paper were created by wax printing, and the reagents were drop cast at the reagent zone. On the paper device, the intensity of the yellow colour increases with ALT concentration in the range of 20-140 U/L in human serum. For the quantification of ALT, coloured images were captured using a digital camera and were processed with Image J software. The machine learning approach was also explored for the ALT analysis by training with colour images of the paper device and testing using a cross-validation procedure. The results obtained with real clinical samples on the paper device showed good accuracy of less than 5% relative error with the clinical lab results. Furthermore, the paper device shows high selectivity to ALT in the presence of various interfering species in blood serum with a sensitivity of 0.261 a.u/(U/L), a detection limit of 4.12 U/L, and precise results with an RSD of less than 7%. For the testing of whole blood, a plasma separation membrane was integrated with the patterned paper.

This study describes the development of paper-based devices for the determination of biothiols. The devices are inexpensive (composed of paper and silver halide particles), and the analytical protocol is easily executable with minimum technical expertise and without the need of specialized equipment; the user has to add a test sample, illuminate the device with a UV lamp, and read the color change of the sensing area using a simple imaging device (i.e., cell-phone camera) or a bare eye. The detection mechanism of the assay is based on the biothiols-mediated photoreduction of nanometer-sized silver chloride particles deposited on the surface of paper; photoreduced silver chloride particles have a grayish coloration that depends on the concentration of biothiols in the tested solution. This is the first time that the UV-mediated photoreduction of solid silver halides particles is used for analytical purposes. The performance of the devices has been tested on the detection of total biothiols content of artificial body fluids and protein–free human blood plasma samples, and the results were satisfactory in terms of sensitivity, selectivity, recoveries and reproducibility.

In this study, a slug-flow microextraction (SFME) coupled with paper spray mass spectrometry (PS-MS) method was developed for rapid and on-site analysis of trace amphetamine-type illicit drugs including amphetamine (AM), methamphetamine (MA) and 3,4-methylenedioxy-N-methylamphetamine (MDMA) in complex biological samples such as whole blood and raw urine. The method involved the application of SFME for rapid extraction of trace amphetamine-type illicit drugs from whole blood and raw urine samples, followed by PS for direct MS analysis under ambient and open-air conditions. The experimental parameters including extraction solvent, extraction cycle, high voltage, and spray solvent, etc., were all investigated, and the optimized conditions showed an enhanced sensitivity of 1–2 order of magnitudes compared with PS-MS. The method showed good linearity, with correlation coefficient values (r) of no less than 0.9979 for analysis of AM, MA, and MDMA in human whole blood and raw urine without additional sample pretreatments. The limits of detection and quantification were 0.01–0.05 ng/mL and 0.05–0.2 ng/mL, respectively. Satisfactory recoveries were also obtained, with 74.2–94.9% for whole blood and 80.2–103.6% for raw urine, respectively. All of our experimental results demonstrated that SFME-PS-MS showed great potential for rapid, on-site, in situ, and high-throughput screening of amphetamine-type illicit drugs in various biological samples.

The use of paper-based methods for clinical diagnostics is a rapidly expanding research topic attracting a great deal of interest. Some groups have attempted to realize an integrated nucleic acid test on a single microfluidic paper chip, including extraction, amplification, and readout functions. However, these studies were not able to overcome complex modification and fabrication requirements, long turn-around times, or the need for sophisticated equipment like pumps, thermal cyclers, or centrifuges. Here, we report an extremely simple paper-based test for the point-of-care diagnosis of rotavirus A, one of the most common pathogens that causes pediatric gastroenteritis. This paper-based test could perform nucleic acid extraction within 5 min, then took 25 min to amplify the target sequence, and the result was visible to the naked eye immediately afterward or quantitative by the UV–Vis absorbance. This low-cost method does not require extra equipment and is easy to use either in a lab or at the point-of-care. The detection limit for rotavirus A was found to be 1 × 103 copies/mL. In addition, 100% sensitivity and specificity were achieved when testing 48 clinical stool samples. In conclusion, the present paper-based test fulfills the main requirements for a point-of-care diagnostic tool, and has the potential to be applied to disease prevention, control, and precision diagnosis.

Aiming to overcome the obstacles of power supply requirement and chip usefulness in practice, a low-cost and convenient portable electrochemical sensing device is introduced for the first time, featuring bipolar electrode system, LED read-out, laminated paper-based devices, and low-voltage button cells. The electric circuits of this practical device are constructed on laminating films with copper and conductive carbon tapes, and the reservoirs facilitating chemical reactions are made with chromatography paper. The device is sensitive to electrochemical responses, validated by the demonstrative hydrogen peroxide and enzyme-assisted glucose detection. The business-card-size chip achieves sensitive analyte detection by naked eyes as well as further image processing in both laboratory samples and human serum samples testing, featuring detection limit as low as 1.79 μM and a dynamic range from 10 μM to 10 mM. This new practical design of point-of-care sensing chip entails the properties of facile fabrication, simple usage, high robustness, low power consumption, and accurate sensing showing the attainability of fabricating a useful and portable analytical device.

Herein, a three-dimensional graphene wall (GWs) and nano-Cu

Due to their portability, versatility for supporting multiple assay formats, and potential for resulting in low-cost assays, paper-based analytical devices (PADs) are an increasingly popular format as a platform for the development of point-of-care tests. However, very few PADs have been translated successfully to their intended environments outside of academic settings. Often overlooked as a factor that inhibits translation, usability is a vital characteristic of any successful point-of-care test. Recent advancements in PAD design have demonstrated improved usability by simplifying various aspects of user operation, including sample collection, sample processing, device operation, detection, and readout/interpretation. Field testing at various stages of device design can offer critical feedback about device usability, especially when it involves the proposed end-user or other stakeholders. By highlighting advances in usability, we aim to encourage thoughtful and rigorous design at the academic prototyping stage to address one outstanding hurdle that limits the number of PADs that make it from the benchtop to the point-of-care.

We developed a paper-based analytical device based on the electropolymerization of poly (3,4-ethylenedioxythipohene) (PEDOT) and graphene oxide (GO) composites on the ITO substrate for the detection of uric acid (UA) in authentic human saliva. Scanning electron microscopy, UV-vis spectrum and X-ray diffraction confirmed the formation of porous PEDOT combined with GO film during the electropolymerization process. The nanocomposite based sensor showed an enhanced electrocatalytic activity toward UA with high sensitivity and stability. We demonstrate that UA can be directly detected in undiluted saliva using the paper-based electroanalytical device with no interference from ascorbic acid and dopamine that are normally present in biological fluids. The results indicated that the developed device is promising for non-invasive monitoring of salivary UA in human body.