Search

Point-of-care (POC) nucleic acid amplification tests (NAAT) can significantly expand testing coverage, which is critical for infectious disease diagnostics and monitoring. The development of various isothermal amplification techniques greatly simplifies NAATs, but the cumbersome nucleic acid extraction step remains a bottleneck for the POC. Alternatively, extraction-free amplification, where crude samples are directly added into the assay, substantially simplifies the workflow. However, sample dilution is often needed in extraction-free amplification to reduce assay inhibition from sample matrices. Since NAATs are typically run at small volumes around 20 μL, the input sample quantity is therefore limited, resulting in an inevitable sensitivity loss. Here we explore the potential to perform isothermal amplification in larger reaction volumes to accommodate larger sample quantities, thereby improving sensitivity in extraction-free amplification. We demonstrated the approach by developing large-volume reverse transcription loop-mediated isothermal amplification (RT-LAMP) for HIV RNA detection from fingerstick plasma. We found that LAMP at reaction volumes up to 1 mL maintained the same performance. We then identified plasma dilution conditions needed to maintain the limit of detection in RT-LAMP. Subsequently, using inactivated HIV virus, we showed the successful detection of 24 HIV RNA copies in a 500 μL RT-LAMP reaction in the presence of 20 μL plasma (fingerstick volumes), translating to a viral load of 1200 copies per mL. To reduce the increased reagent cost with expanded reaction volumes, we further identified lower-cost reagents with maintained assay performance. Moreover, we showed that large-volume LAMP, compared to 20 μL reactions, could tolerate higher concentrations of various inhibitors in the sample, such as albumin and GuSCN. NAATs are conventionally conducted at small reaction volumes. Here we demonstrated that LAMP can be run at large reaction volumes (over 100 μL) with maintained assay performance, allowing sample inhibition to be mitigated while accommodating larger sample quantities. The same strategy of expanding reaction volumes could be applied to other isothermal amplification methods and various POC applications, to streamline test workflows and/or improve assay sensitivity. [Display omitted] • LAMP at volumes up to 1 mL maintains the same performance as 20 μL reactions. • RT-LAMP shows the same amplification LoD with 4% plasma in the reaction. • 500 μL RT-LAMP can amplify 24 copies of HIV RNA in the presence of 20 μL plasma. • LAMP at larger volumes can tolerate higher inhibitor concentrations in the sample. [ABSTRACT FROM AUTHOR]

Analysis of CpG methylation is informative for cancer diagnosis. Previously, we developed a novel method to discriminate CpG methylation status in target DNA by blocking recombinase polymerase amplification (RPA), an isothermal DNA amplification technique, using methyl-CpG binding domain (MBD) protein 2 (MBD2). The method was named MBD protein interference-RPA (MBDi-RPA). In this study, MBDi-RPA was performed using methyl-CpG binding protein 2 (MeCP2), another MBD family protein, as the blocking agent. MBDi-RPA using MeCP2 detected low levels of CpG methylation, showing that it had higher sensitivity than MBDi-RPA using MBD2. We also developed real-time RPA, which enabled rapid analysis of DNA amplification without the need for laborious agarose gel electrophoresis and used it in combination with MBDi-RPA. We termed this method real-time MBDi-RPA. The method using MeCP2 could determine the abundance ratio of CpG-methylated target DNA simply and rapidly, although highly sensitive detection was challenging. Real-time MBDi-RPA using MeCP2 could be potentially useful for estimating CpG methylation status in target DNA prior to more detailed analyses. [Display omitted] • CpG methylation is associated with various malignancies. • Methyl-CpG binding domain proteins bind to CpG-methylated sites and block DNA amplification by RPA. • MBDi-RPA using MeCP2 discriminates CpG methylation status with high sensitivity. • Real-time MBDi-RPA is a simple and rapid method for estimating CpG methylation status. • Real-time MBDi-RPA is potentially useful for cancer diagnosis. [ABSTRACT FROM AUTHOR]

Background: High-efficiency and highly reliable analysis of microRNAs (miRNAs) in bodily fluids highlights its significance to be extensively utilized as candidates for non-invasive "liquid biopsy" approaches. DNA biosensors based on strand displacement amplification (SDA) methods have been successfully designed to detect miRNAs given the efficiently amplified and recycled of the target sequences. However, the unpredictable DNA framework and heavy reliance on free diffusion or random reactant collisions in existing approaches lead to delayed reaction kinetics and inadequate amplification. Thus, it is crucial to create a modular probe with a controlled structure, high local concentration, and ease of synthesis., Results: Inspired by the natural spatial-confinement effect based on a well-known streptavidin-biotin interaction, we constructed a protein-DNA hybrid, named protein-scaffolded DNA tetrads (PDT), which consists of four biotinylated Y-shaped DNA (Y-DNA) surrounding a streptavidin protein center via a streptavidin-biotin bridge. The streptavidin-biotin recognition system significantly increased the local concentration and intermolecular distance of the probes to achieve enhanced reaction efficiency and kinetics. The PDT-based assay starts with the target miRNA binding to Y-DNA, which disassembles the Y-DNA structures into three types of hairpin-shaped structures via self-primed strand displacement amplification ( SP SDA) and generates remarkable fluorescence signal that is proportional to the miRNA concentration. Results demonstrated that PDT enabled a more efficient detection of miRNA-21 with a sensitivity of 1 fM. Moreover, it was proven reliable for the detection of clinical serum samples, suggesting great potential for advancing the development of rapid and robust signal amplification technologies for early diagnosis., Significance: This simple yet robust system contributes to the early diagnosis of miR-21 with satisfactory sensitivity and specificity, and display a significantly improved nuclease resistance owing to their unique structure. The results suggested that the strategy is expected to provide a promising potential platform for tumor diagnosis, prognosis and therapy., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The COVID-19 pandemic has led to a rise in point-of-care (POC) and home-based tests, but concerns over usability, accuracy, and effectiveness have arisen. The incorporation of internal amplification controls (IACs), essential control for translational POC diagnostics, could mitigate false-negative and false-positive results due to sample matrix interference or inhibition. Although emerging POC nucleic acid amplification tests (NAATs) for detecting SARS-CoV-2 show impressive analytical sensitivity in the lab, the assessment of clinical accuracy with IACs is often overlooked. In some cases, the IACs were run spatially, complicating assay workflow. Therefore, the multiplex assay for pathogen and IAC is needed. We developed a one-pot duplex reverse transcriptase loop-mediated isothermal amplification (RT-LAMP) assay for saliva samples, a non-invasive and simple collected specimen for POC NAATs. The ORF1ab gene of SARS-CoV-2 was used as a target and a human 18S ribosomal RNA in human saliva was employed as an IAC to ensure clinical reliability of the RT-LAMP assay. The optimized assay could detect SARS-CoV-2 viral particles down to 100 copies/μL of saliva within 30 min without RNA extraction. The duplex RT-LAMP for SARS-CoV-2 and IAC is successfully amplified in the same reaction without cross-reactivity. The valid results were easily visualized in triple-line lateral flow immunoassay, in which two lines (flow control and IAC lines) represent valid negative results and three lines (flow control, IAC, and test line) represent valid positive results. This duplex assay demonstrated a clinical sensitivity of 95%, specificity of 100%, and accuracy of 96% in 30 clinical saliva samples. IACs play a crucial role in ensuring user confidence with respect to the accuracy and reliability of at-home and POC molecular diagnostics. We demonstrated the multiplex capability of SARS-COV-2 and human18S ribosomal RNA RT-LAMP without complicating assay design. This generic platform can be extended in a similar manner to include human18S ribosomal RNA IACs into different clinical sample matrices. [Display omitted] • Duplex RT-LAMP detects SARS-CoV-2 RNA and human internal amplification control (IAC) simultaneously in unprocessed saliva. • The assay detects SARS-CoV-2 down to 100 copies/µL with 95% sensitivity and 100% specificity in 30 clinical samples. • The SARS-CoV-2 and IAC were amplified in the same duplex reaction within 30 minutes with no cross-reactivity. • The integrated IAC helps to ensure the accuracy, reliability, and user confidence in at-home and point-of-care settings. [ABSTRACT FROM AUTHOR]

Pathogenic bacteria are primarily kinds of food hazards that provoke serious harm to human health via contaminated or spoiled food. Given that pathogenic bacteria continue to reproduce and expand once they contaminate food, pathogenic bacteria of high concentration triggers more serious losses and detriments. Hence, it is essential to detect low-dose pollution at an early stage with high sensitivity. Aptamers, also known as "chemical antibodies", are oligonucleotide sequences that have attracted much attention owing to their merits of non-toxicity, small size, variable structure as well as easy modification of functional group. Aptamer-based bioanalysis has occupied a critical position in the field of rapid detection of pathogenic bacteria. This is attributed to the unique advantage of using aptamers as recognition elements in signal amplification strategies. The signal amplification strategy is an effective means to improve the detection sensitivity. Some diverse signal amplification strategies emphasize the synthesis and assembly of nanomaterials with signal amplification capabilities, while others introduce various nucleic acid amplification techniques into the detection system. This review focuses on a variety of signal amplification strategies employed in aptamer-based detection approaches to pathogenic bacteria. Meanwhile, we provided a detailed introduction to the design principles and characteristics of signal amplification strategies, as well as the improvement of sensor sensitivity. Ultimately, the existing issues and development trends of applying signal amplification strategies in apta-sensing analysis of pathogenic bacteria are critically proposed and prospected. Overall, this review discusses from a new perspective and is expected to contribute to the further development of this field. [Display omitted] • Signal amplification strategies utilized in pathogen apta-sensing are summarized. • Strategies, principles and characteristics engineered in sensors are reviewed. • Challenges and prospects of signal amplification strategy are proposed. [ABSTRACT FROM AUTHOR]

Background: Sporothrix globosa (S. globosa) is an agricultural activity-related but neglected pathogenic fungus responsible for sporotrichosis. Timely detection is crucial for managing and preventing its spread. However, due to the lack of efficient recognition elements for enriching S. globosa, the current approaches for detecting S. globosa are not simple and/or sensitive enough. This hinders their wider application of fast screening., Results: Herein, we successfully prepared immunoglobulin Y (IgY) targeting S. globosa, and developed a rapid and accurate detection method, improving upon current limited and inadequate detection approaches. Our method combined the use of IgY and loop-mediated isothermal amplification (LAMP) to enhance detection sensitivity and specificity simultaneously. The IgY was fabricated on magnetic beads to specifically concentrate S. globosa in samples, while LAMP amplified the captured target after simple boiling DNA extraction. By using our method, as low as 4.66 × 10 2 Cells mL -1 S. globosa was accurately detected in soil and corn straw samples. We further integrated this assay into a portable toolbox for sample-to-result detection in resource-limited areas. By using this toolbox, we have colorimetrically detected soil and corn straw samples contaminated by S. globosa, suggesting the promising on-site detection potential., Significance and Novelty: A new IgY recognizing S. globosa was prepared. Through the combination of IgY enrichment and LAMP amplification, the detection sensitivity and specificity were improved simultaneously. This method eliminated thermal cycling, simplified the operation, and reduced the analysis time. Compared to existing methods, our approach is more suitable for on-site detection and can significantly improve public health responses to sporotrichosis outbreaks., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Since microRNAs (miRNAs) are valuable biomarkers for disease diagnosis and prognosis, the pursuit of enhanced detection sensitivity through signal amplification strategies has emerged as a prominent focus in low-abundance miRNA detection research. DNA walkers, as dynamic DNA nanodevice, have gained significant attention for their applications as signal amplification strategies. To overcome the limitations of unipedal DNA walkers with a restricted signal amplification efficiency, there is a great need for multi-pedal DNA walkers that offer improved walking and signal amplification capabilities. Here, we employed a combination of catalytic hairpin assembly (CHA) and APE1 enzymatic cleavage reactions to construct a tripedal DNA walker, driving its movement to establish a cascade signal amplification system for the electrochemical detection of miRNA-155. The biosensor utilizes tumor cell-endogenous microRNA-155 and APE1 as dual-trigger for DNA walker formation and walking movement, leading to highly efficient and controllable signal amplification. The biosensor exhibited high sensitivity, with a low detection limit of 10 pM for microRNA-155, and successfully differentiated and selectively detected microRNA-155 from other interfering RNAs. Successful detection in 20 % serum samples indicates its potential clinical application. In addition, we harnessed strand displacement reactions to create a gentle yet efficient electrode regeneration strategy, to addresses the time-consuming challenges during electrode modification processes. We have successfully demonstrated the stability of current signals even after multiple cycles of electrode regeneration. This study showcased the high-efficiency amplification potential of multi-pedal DNA walkers and the effectiveness and versatility of strand displacement in biosensing applications. It opens a promising path for developing regenerable electrochemical biosensors. This regenerable strategy for electrochemical biosensors is both label-free and cost-effective, and holds promise for detecting various disease-related RNA targets beyond its current application., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

In this study, a simple fluorescent detection of survival motor neuron gene (SMN) in diagnosis of spinal muscular atrophy (SMA) based on nucleic acid amplification test and the poly-T luminescent copper nanoclusters (CuNCs) was established. SMA is a severely genetic diseases to cause infant death in clinical, and detection of SMN gene is a powerful tool for pre- and postnatal diagnosis of this disease. This study utilized the molecular inversion probe for recognition of nucleotide variant between SMN1 (c.840 C) and SMN2 (c.840 C > T) genes, and rolling circle amplification with a universal primer for production of poly-T single-strand DNA. Finally, the fluorescent CuNCs were formed on the poly-T single-strand DNA template with addition of CuSO 4 and sodium ascorbate. The fluorescence of CuNCs was only detected in the samples with the presence of SMN1 gene controlling the disease of SMA. After optimization of experimental conditions, this highly efficient method was performed under 50 °C for DNA ligation temperature by using 2U Ampligase, 3 h for rolling circle amplification, and the formation of the CuNCs by mixing 500 μM Cu2+ and 4 mM sodium ascorbate. Additionally, this highly efficient method was successfully applied for 65 clinical DNA samples, including 4 SMA patients, 4 carriers and 57 wild individuals. This label-free detection strategy has the own potential to not only be a general method for detection of SMN1 gene in diagnosis of SMA disease, but also served as a tool for detection of other single nucleotide polymorphisms or nucleotide variants in genetic analysis through designing the different sensing probes. Image 1 • This is a first method using MIP-RCA-CuNCs for fluorescent detection of SMN gene. • This biosensor was simple for analysis of nucleotide variants in DNA gene. • This work supplied a platform for genotyping of nucleotide variants in the future. [ABSTRACT FROM AUTHOR]

Rapid genotyping of single nucleotide polymorphism (SNP) is crucial for prognostics and disease management, enabling more rapid therapy selection and treatment determination. Here, we introduce a point-of-care platform for hair loss-related SNP genotyping based on allele-specific loop-mediated isothermal amplification (AS-LAMP) combined with naked-eye visualization. The specificity of the AS-LAMP assay was significantly enhanced by using mismatched allele-specific primers. AS-LAMP reaction and Schiff's reagent-based colorimetric detection were successfully performed using a thermoplastic genotyping chip. This strategy also showed potential for determining homozygotes and heterozygotes in a target sample. To assess SNP genotyping capacity, the genotyping chip was fabricated to visually detect rs6152 polymorphism of an androgen receptor gene associated with genetically induced hair loss. The genotyping platform rapidly identified the SNP within 40 min, and the detection limit was as low as 1 pg/μL of the target DNA contained in human serum. The introduced strategy showed high specificity and stability in discriminating low-abundance mutations, making it suitable as a portable and affordable point-of-care platform for rapid and accurate SNP discrimination applicable for bedside detection., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Background: Listeria monocytogenes is a pathogenic bacterium that can lead to severe illnesses, especially among vulnerable populations. Therefore, the development of rapid and sensitive detection methods is vital to prevent and manage foodborne diseases. In this study, we used tetraethylenepentamine (TEPA)-functionalized magnetic nanoparticles (MNPs) and a loop-mediated isothermal amplification (LAMP)-based CRISPR/Cas12a-based biosensor to concentrate and detect, respectively, L. monocytogenes. LAMP enables DNA amplification at a constant temperature, providing a highly suitable approach for point-of-care testing (POCT). The ability of CRISPR/Cas12a to cleave ssDNA reporter, coupled with TEPA-functionalized MNPs effective attachment to negatively charged bacteria, forms a promising biosensor., Results: The LAMP assay was meticulously developed by selecting specific primers and designing crRNA sequences targeting a specific region within the hly gene of L. monocytogenes. We selected primer and refined the amplification conditions by systematically exploring a temperature range from 59 °C to 69 °C, ensuring the attainment of optimal performance. This process was complemented by systematic optimization of LAMP-CRISPR/Cas12a system parameters. In particular, we successfully established the optimal ssDNA reporter concentrations (0-1.2 μM) and Cas12a-mediated trans-cleavage times (0-20 min), crucial components that underpin the effectiveness of the LAMP-CRISPR/Cas12a-based biosensor. For optimizing parameters in capturing L. monocytogenes using TEPA-functionalized MNPs, capture efficiency was significantly enhanced through adjustments in TEPA-functionalized MNPs concentration, incubation times, and magnetic separation duration. Large-volume (20 mL) magnetic separation exhibited a 10-fold sensitivity improvement over conventional methods. Utilizing TEPA-functionalized MNPs, the LAMP-CRISPR/Cas12a-based biosensor achieved detection limits of 10 0  CFU mL -1 in pure cultures and 10 0  CFU g -1 in enoki mushrooms., Significance: The integration of this novel technique with the LAMP-CRISPR/Cas12a-based biosensor enhances the accuracy and sensitivity of L. monocytogenes detection in foods, and it can be a promising biosensor for POCT. The 10-fold increase in sensitivity compared to conventional methods makes this approach a groundbreaking advancement in pathogenic bacteria detection for food safety and public health., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

APOBEC3A (A3A) is a cytidine deaminase with critical roles in molecular diagnostics. Herein, we demonstrate the enzymatic DNA repairing amplification-powered construction of an Au nanoparticle-based nanosensor for single-molecule monitoring of A3A activity in cancer cells. Target A3A can convert cytosine (C) in substrate probe to uracil (U), and then the template binds with substrate probe to form a dsDNA containing U/A base pairs. Uracil DNA glycosylase (UDG) excises the U base to produce an apurinic/apyrimidinic (AP) site that can be cleaved by apurinic/apyrimidic endonuclease 1 (APE1) to obtain the substrate fragment with 3'-OH end. Subsequently, the substrate fragment initiates cyclic enzymatic repairing amplification (ERA), releasing trigger-1 and trigger-2. The resultant trigger-1 can act as the primer to induce multiple cycles of cyclic ERA, producing numerous trigger-1 and trigger-2. The hybridization of trigger-2 with signal probe forms the dsDNA duplexes with an AP site, inducing the cyclic cleavage of signal probes by APE1 to release abundant Cy5 molecules from the AuNPs. Released Cy5 molecules can be easily quantified by single-molecule imaging. This nanosensor allows for specific and sensitive detection of A3A activity with a detection limit of 0.855 aM, and it can further measure kinetic parameters, screen inhibitors, and quantify endogenous A3A activity at the single-cell level, with prospect application in disease diagnostics and therapy., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The polymeric chain reaction (PCR) has come under fire for being time-consuming, requiring expensive equipments, and requiring the extraction and purification of nucleic acids. Here, an ultra-fast and sensitive detection platform without nucleic acid extraction solved the above problems. Firstly, the RoomTemp Sample Lysis Kit released the nucleic acid in 3 min and removed the inhibition to facilitate the amplification reaction. What's more, ultra-fast PCR (UF-PCR) can complete 40 cycles in just 15 min and 50 s. To improve the sensitivity and provide more convenient reading modes, CRISPR/Cas12a was mediated to detect Lumpy skin disease virus (LSDV). The platform output fluorescence and Lateral flow dipstick (LFD) signals. The actual detection limit was 2 × 10 1 copies·μL -1 . The portable platform realized visualization, excellent sensitivity and quick speed. In summary, the field-friendly testing platform had great potential in practical testing., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

MicroRNAs (miRNAs) are a class of small, non-coding RNA molecules involved in the regulation of gene expression, thus considered as promising biomarkers for cancer, cardiovascular diseases, neurodegenerative diseases, etc. However, quantitative analysis of miRNAs faces challenges owing to their high homology, small size & ultra-low abundance, and disease occurrence is often related to abnormal expression of multiple miRNAs where method for parallel miRNAs analysis is required. In this work, multiplexed analysis of miRNAs was established on a plasmonic nano-chip capable of fluorescence enhancement in the near-infrared region. Combined with polyadenylation at the hydroxyl terminate of target miRNA to afford abundant sites for fluorophore labeling, our assay achieved amplification-free detection of miRNAs from nM to fM with the limit of detection down to ca. 5 fM. A miRNA panel was constructed to detect 10 miRNAs differentially expressed in MCF-7 and A549 cell lines and validated with qRT-PCR, demonstrating the practical application of this method. This scalable platform can be customized for different miRNA panels, facilitating multiple miRNA profiling for various diseases., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper, (Copyright © 2023 Elsevier B.V. All rights reserved.)

Background: A false negative result is one of the major problems in nucleic acid detection. Failure to screen positive samples for pathogens or viruses poses a risk to public health. This situation will lead to more serious consequences for infectious pathogens or viruses. At present, the common solution is to introduce exogenous or endogenous internal control. Because it amplifies and is detected separately from the target gene, it cannot avoid false negative results caused by DNA extraction failure or reagent inactivation. There is an urgent need for a simple and reliable method to solve the false negative problem of nucleic acid detection., Results: We established a chip and an on-chip detection method for the integrated detection of target genes and internal control using the CRISPR system in LAMP amplification products. The chip is processed from a low-cost PMMA board and has three chambers and some channels. After adding the sample, the chip only needs to be rotated twice, and the sample enters three chambers successively depending on its gravity for dual LAMP reaction and CRISPR detections. With a portable LED blue light exciter, visual fluorescence detection is realized. Whether the detection result is positive, negative, or invalid can be determined according to the fluorescence in the CRISPR chamber for target gene and CRISPR chamber for internal control. In this study, the detection of Salmonella enterica in Fenneropenaeus chinensis was taken as an example. The results showed good specificity and sensitivity. It could detect as low as 15 copies/μL of Salmonella enterica., Significance: The on-chip detection solves the problem of aerosol contamination and false negative results. It has the advantages of high sensitivity, high specificity, high accuracy, and low cost. This research will advance the development of nucleic acid detection technology, providing a new and reliable strategy for POCT detection of pathogenic bacteria and viruses., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The synthetic biology has employed the synthetic gene networks through engineering to construct various functions in biological systems. However, the use of gene circuits to create sensors for detecting low-abundance targets has been limited due to the lack of signal amplification strategies beyond direct output of detection signals. To address this issue, we introduce a novel method utilizing Selective Recognition Proximity Ligation and signal amplification with T7 Transcription and CRISPR/Cas12a system (SRPL-TraCs), which permits the incorporation of cell-free gene circuits with signal amplification and enables the construction of high-order cascade signal amplification strategy to detect biomarkers in homogeneous systems. Specifically, the SRPL-TraCs utilizes selective recognition proximity ligation with high-fidelity T4 DNA ligase and generates a unique crRNA via T7 transcription, along with target-activated Cas12a/crRNA system to achieve excellent specificity for HIV-1 DNA. With this straightforward synthetic biology-based method, the proposed SRPL-TraCs has the potential to detect numerous other interesting targets beyond the nucleic acids., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

CRISPR-Cas12a RNA-guided complexes have been developed to facilitate the rapid and sensitive detection of nucleic acids. However, they are limited by the complexity of the operation, risk of carry-over contamination, and degradation of CRISPR RNA (crRNA). In this study, a Cas12a-based single-stranded DNA (ssDNA)-modified crRNA (mD-crRNA)-mediated one-step diagnostic method (CasDOS) was established to overcome these drawbacks. mD-crRNA consisted of wild-type crRNA (Wt-crRNA) with ssDNA extensions at the 3' and 5' ends. Compared to Wt-crRNA, mD-crRNA exhibited a 100-1000-fold increase in sensitivity in the one-step assay, reducing the cis-cleavage activity of Cas12a to avoid excessive cleavage of the target DNA in the early stages of the reaction, leading to increased amplification and accumulation of the target amplicons, and improved the speed and intensity of the generated fluorescence signal. The detectability of CasDOS was 16.6 aM for the constructed plasmids of Streptococcus agalactiae (GBS), human papillomavirus type 16 (HPV16), and type 18 (HPV18). In clinical trials, CasDOS achieved 100% accuracy in identifying the known genotypes of the five HPV DNA samples. Moreover, CasDOS showed complete concordance with the qPCR results for GBS detection in ten vaginal or cervical swab samples, with a turnaround time from sampling to results within 30 min. In addition, mD-crRNA remained stable after Ribonuclease R treatment, suggesting that it might be more suitable as a raw material for the CRISPR detection kit. In conclusion, we have developed a universal, rapid, and highly sensitive one-step CRISPR detection assay., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Due to the extreme infectivity of Yersinia pestis it poses a serious threat as a potential biowarfare agent, which can be rapidly and facilely disseminated. A cost-effective and specific method for its rapid detection at extremely low levels is required, in order to facilitate a timely intervention for containment. Here, we report an ultrasensitive method exploiting a combination of isothermal nucleic acid amplification with a tailed forward primer and biotinylated dNTPs, which is performed in less than 30 min. The polymerase chain reaction (PCR) and enzyme linked oligonucleotide assay (ELONA) were used to optimise assay parameters for implementation on the LFA, and achieved detection limits of 45 pM and 940 fM using SA-HRP and SA-polyHRP, respectively. Replacing PCR with isothermal amplification, namely recombinase polymerase amplification, similar signals were obtained (314 fM), with just 15 min of amplification. The lateral flow detection of the isothermally amplified and labelled amplicon was then explored and detection limits of 7 fM and 0.63 fg achieved for synthetic and genomic DNA, respectively. The incorporation of biotinylated dNTPs and their exploitation for the ultrasensitive molecular detection of a nucleic acid target has been demonstrated and this generic platform can be exploited for a multitude of diverse real life applications. Image 1 • Ultrasensitive molecular detection of Yersinia pestis using biotinylated dNTPs and tailed primer is demonstrated. • Optimisation of ratio of biotinylated dNTPs: natural dNTPs is carried out using PCR and ELONA. • Optimised parameters were exploited using RPA. • Lateral flow assays for detection of single tailed amplicon and biotinylated dNTPs with SA-AuNPs was developed. • Real samples were tested. [ABSTRACT FROM AUTHOR]

MicroRNAs (miRNAs) research in cancer diagnosis is expanding, on account of miRNAs were demonstrated to be key indicator of gene expression and hopeful candidates for biomarkers. In this study, a stable miRNA-let-7a fluorescent biosensor was successfully designed based on an exonuclease Ⅲ-assisted two-stage strand displacement reaction (SDR). First, an entropy-driven SDR containing a three-chain structure of the substrate is used in our designed biosensor, leading to reduce the reversibility of the target recycling process in each step. The target acts on the first stage to start the entropy-driven SDR, which generates the trigger used to stimulate the exonuclease Ⅲ-assisted SDR in the second stage. At the same time, we design a SDR one-step amplification strategy as a comparison. Expectly, this developed two-stage strand displacement system has a low detection limit of 25.0 pM as well as a broad detection range of 4 orders of magnitude, making it more sensitive than the SDR one-step sensor, whose detection limit is 0.8 nM. In addition, this sensor has high specificity across members of the miRNA family. Therefore, we can take advantage of this biosensor to promote miRNA research in cancer diagnosis sensing systems., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Capripoxvirus (CaPV) contains three viruses that have caused massive losses in the livestock and dairy industries. Accurate CaPV differentiation has far-reaching implications for effectively controlling outbreaks. However, it has a great challenge to distinguishing three viruses due to high homology of 97%. Here, we established a sensitive CRISPR/Cas12a array based on Multiple-recombinase polymerase amplification (M-RPA) for CaPV differentiation, which provided a more comprehensive and accurate differentiation mode targeting VARV B22R and RPO30 genes. By sensitive CRISPR/Cas12a and M-RPA, the actual detection limits of three viruses were as low as 50, 40 and 60 copies, respectively. Moreover, Lateral flow dipstick (LFD) array based on CRISPR/Cas12a achieved portable and intuitive detection, making it suitable for point-of-care testing. Therefore, CRISPR/Cas12a array and LFD array paved the way for CaPV differentiation in practice. Additionally, we constructed a real-time quantitative PCR (qPCR) array to fill the qPCR technical gap in differentiation and to facilitate the quarantine departments., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Abstract Isothermal nucleic acid amplification (INAA) techniques such as loop-mediated isothermal amplification (LAMP) and isothermal multiple-self-matching-initiated amplification (IMSA) constitute simple and rapid approaches for the detection of pathogens. However, due to the employment of multiple primers, the detection of LAMP and IMSA products is easily influenced by high background signals from primer dimer-based nonspecific nucleic acid amplification (NSA) products. Moreover, time-consuming sample preparation steps are often required for the isolation of sufficiently pure nucleic acid prior to INAA. To address these drawbacks, hydrophobic magnetic ionic liquids (MILs) were used to rapidly preconcentrate DNA from complex biological samples followed by direct amplification by LAMP and IMSA. Careful control of the components within the isothermal buffer permitted direct addition of DNA-enriched MIL to the INAA reaction mixture, thereby circumventing tedious purification procedures that are ordinarily required prior to downstream DNA amplification. When added directly to INAA reactions, MIL solvents released metal ions that ultimately inhibited the primer dimer-mediated NSA, resulting in a flat or decreased baseline signal in no-template control samples and short threshold time for positive reactions. Using a MIL-based single droplet DNA extraction method, MIL-enhanced INAA reaction system, and a handheld 3D printed device for visual detection of the amplified product in customized tubes, we demonstrate the potential of the MIL-based approach for the onsite analysis of DNA from pathogens. Graphical abstract Image 1 Highlights • Magnetic ionic liquid-compatible isothermal nucleic acid amplification (MIL-INAA) was developed. • MIL-INAA significantly reduced the background fluorescence in real-time detection. • MIL-INAA accelerated target-loaded amplification with a shorter threshold time. • Closed-tube visual detection of MIL-INAA product was established. • Rapid visual DNA analysis from cell lysates was achieved using MIL-INAA and MILbased DNA extraction. [ABSTRACT FROM AUTHOR]

In this work, a newly developed surface plasma resonance (SPR) system for the sensitive detection of M.SssI activity has been designed based on double signal amplification with DNA chain cyclic reactions and AuNPs. In the absence of M.SssI, hairpin DNA 1 (HP1) can be cleaved into s1 fragments catalyzed by HpaII. The s1 fragments can then trigger a recycling process of hairpin DNA 2 (HP2) hybridization and subsequently release massive s2 and s3 in the solution of Nt.AlwI and HPII. AuNPs-DNA can be captured on gold film by the released s2 and s3 to produce a strong SPR signal. Whereas in the presence of M.SssI, methylated HP1 cannot be cleaved by HpaII, thus produce a weak SPR signal. The SPR signals are dependent on the M.SssI concentration in the range from 0.5 to 50 U/mL. The successful detection of M.SssI activity in clinical serum samples and inhibition of M.SssI using 5-Aza and 5-Aza-dC indicate a great potential of this strategy for building new monitoring platform in bioanalysis and clinical biomedicine. [ABSTRACT FROM AUTHOR]

By virtue of its ruggedness, portability, rapid processing times, and ease-of-use, academic and commercial interest in centrifugal microfluidic systems has soared over the last decade. A key advantage of the LoaD platform is the ability to automate laboratory unit operations (LUOs) (mixing, metering, washing etc.) to support direct translation of 'on-bench' assays to 'on-chip'. Additionally, the LoaD requires just a low-cost spindle motor rather than specialized and expensive microfluidic pumps. Furthermore, when flow control (valves) is implemented through purely rotational changes in this same spindle motor (rather than using additional support instrumentation), the LoaD offers the potential to be a truly portable, low-cost and accessible platform. Current rotationally controlled valves are typically opened by sequentially increasing the disc spin-rate to a specific opening frequency. However, due lack of manufacturing fidelity these specific opening frequencies are better described as spin frequency 'bands'. With low-cost motors typically having a maximum spin-rate of 6000 rpm (100 Hz), using this 'analogue' approach places a limitation on the number of valves, which can be serially actuated thus limiting the number of LUOs that can be automated. In this work, a novel flow control scheme is presented where the sequence of valve actuation is determined by architecture of the disc while its timing is governed by freely programmable 'digital' pulses in its spin profile. This paradigm shift to 'digital' flow control enables automation of multi-step assays with high reliability, with full temporal control, and with the number of LUOs theoretically only limited by available space on the disc. We first describe the operational principle of these valves followed by a demonstration of the capability of these valves to automate complex assays by screening tomato leaf samples against plant pathogens. Reagents and lysed sample are loaded on-disc and then, in a fully autonomous fashion using only spindle-motor control, the complete assay is automated. Amplification and fluorescent acquisition take place on a custom spin-stand enabling the generation of real-time LAMP amplification curves using custom software. To prevent environmental contamination, the entire discs are sealed from atmosphere following loading with internal venting channels permitting easy movement of liquids about the disc. The disc was successfully used to detect the presence of thermally inactivated Clavibacter michiganensis. Michiganensis (CMM) bacterial pathogen on tomato leaf samples., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

Economically motivated adulteration (EMA) has become a concern in food safety. We propose a CRISPR/Cas12a Mediated Enzymatic Recombinase Amplification detection system (CAMERA) that integrates Enzymatic Recombinase Amplification (ERA) and Cas12a cleavage to detect halal food adulteration. We designed and screened crRNA targeting CLEC, a porcine-specific nuclear single-copy gene, and optimized the reagent concentrations and incubation times for the ERA and Cas12a cleavage steps. CAMERA was highly specific for pork ingredients detection. The DNA concentration and fluorescence signal intensity relationship was linear at DNA concentrations of 20-0.032 ng/μL. CAMERA detected as few as two CLEC copies and quantified samples with porcine DNA content as low as 5% within 25 min. The system could be operated in a miniaturized working mode that requires no technical expertise or professional equipment, making CAMERA a valuable tool in resource-limited areas for the qualitative and quantitative detection of pork ingredients in halal food., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

CRISPR-Cas12a (Cpf1) is widely used for pathogen detection. However, most Cas12a nucleic acid detection methods are limited by a PAM sequence requirement. Moreover, preamplification and Cas12a cleavage are separate. Here, we developed a one-step RPA-CRISPR detection (ORCD) system unrestricted by the PAM sequence with high sensitivity and specificity that offers one-tube, rapid, and visually observable detection of nucleic acids. In this system, Cas12a detection and RPA amplification are performed simultaneously, without separate preamplification and product transfer steps, and 0.2 copies/μL of DNA and 0.4 copies/μL of RNA can be detected. In the ORCD system, the activity of Cas12a is the key to the nucleic acid detection; specifically, reducing Cas12a activity increases the sensitivity of ORCD assay detection of the PAM target. Furthermore, by combining this detection technique with a nucleic acid extraction-free method, our ORCD system can be used to extract, amplify and detect samples within 30 min, as verified with tests of 82 Bordetella pertussis clinical samples with a sensitivity and specificity of 97.30% and 100% compared with PCR. We also tested 13 SARS-CoV-2 samples with RT-ORCD, and the results were consistent with RT-PCR., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

This study highlighted the development of a four target nitrocellulose-based nucleic acid lateral flow immunoassay biosensor in a dry-reagent strip format for interpretation of double-labelled double-stranded amplicons from thermostabilised triplex loop-mediated isothermal amplification assay. The DNA biosensor contained two test lines which captured biotin and texas red labelled amplicons; a LAMP internal amplification control line that captured digoxigenin labelled amplicon; and a chromatography control line that validated the functionality of the conjugated gold nanoparticles and membrane. The red lines on detection pad were generated when the gold nanoparticles conjugated antibody bound to the fluorescein labelled amplicons, and the capture agents bound to their specific hapten on the other 5' end of the double-stranded amplicon. The applicability of this DNA biosensor was demonstrated using amoebiasis-causing Entamoeba histolytica simultaneously with the non-pathogenic but morphologically identical Entamoeba dispar and Entamoeba moshkovskii. The biosensor detection limit was 10 E. histolytica trophozoites, and revealed 100% specificity when it was evaluated against 3 medically important Entamoeba species and 75 other pathogenic microorganisms. Heat stability test showed that the biosensor was stable for at least 181 days at ambient temperature. This ready-to-use and cold-chain-free biosensor facilitated the post-LAMP analysis based on visualisation of lines on strip instead of observation of amplicon patterns in agarose gel. [ABSTRACT FROM AUTHOR]

K-Ras mutations at codon 12 play an important role in an early step of carcinogenesis. Here, a label-free colorimetric isothermal cascade amplification for ultrasensitive and specific detection of K-Ras point mutation is developed based on a double-hairpin molecular beacon (DHMB). The biosensor consists of DHMB probe and a primer-incorporated polymerization template (PPT) designed partly complementary to DHMB. In the presence of polymerase, target DNA is designed to trigger strand displacement amplification (SDA) via promote the hybridization of PPT with DHMB and subsequently initiates cascade amplification process with the help of the nicking endonuclease. During the hybridization and enzymatic reaction, G-quadruplex/hemin DNAzymes are generated, catalyzing the oxidation of ABTS 2− by H 2 O 2 in the presence of hemin. Utilizing the proposed facile colorimetric scheme, the target DNA can be quantified down to 4 pM with the dynamic response range of 5 orders of magnitude, indicating the substantially improved detection capability. Even more strikingly, point mutation in K-ras gene can be readily observed by the naked eye without the need for the labeling or expensive equipment. Given the high-performance for K-Ras analysis, the enhanced signal transduction capability associated with double-hairpin structure of DHMB provides a novel rout to screen biomarkers, and the descripted colorimetric biosensor seems to hold great promise for diagnostic applications of genetic diseases. [ABSTRACT FROM AUTHOR]