Search

An automatic flow-through dynamic extraction method is proposed for the first time for in vitro exploration, with high temporal resolution, of the transit of the chyme from the gastric to the duodenal compartment using the Versantvoort's fed-state physiologically relevant extraction test. The flow manifold was coupled on-line to an inductively coupled plasma optical emission spectrometer (ICP OES) for real-time elucidation of the bioaccessible elemental fraction of micronutrients (viz., Cu, Fe and Mn) in food commodities across the gastrointestinal tract. The simulated intestinal and bile biofluid (added to the gastric phase) was successively pumped at 1.0 mL min−1 through a large-bore column (maintained at 37.0 ± 2.0 °C) initially loaded with a weighed amount of linseed (250 mg) using a PVDF filter membrane (5.0 μm pore size) for retaining of the solid sample and in-line filtration of the extracts. The lack of bias (trueness) of the on-line gastrointestinal extraction method coupled to ICP OES was confirmed using mass balance validation following microwave assisted digestion of the residual (non-bioaccessible) elemental fraction. Mass balance validation yielded absolute recoveries spanning from 79 to 121% for the overall analytes and samples. On-line dynamic extraction was critically appraised against batch counterparts for both gastric and gastrointestinal compartments. Due to the lack of consensus in the literature regarding the agitation method for batch oral bioaccessibility testing, several extraction approaches (viz., magnetic stirring, end-over-end rotation and orbital shaking) were evaluated. Improved gastric extractability of Fe along with bioaccessible data comparable to the dynamic counterpart based on the continuous displacement of the extraction equilibrium was obtained with batchwise magnetic stirring, which is deemed most appropriate for ascertaining worst-case/maximum bioaccessibility scenarios.

A novel biomimetic extraction procedure that allows for the in-line handing of ≥400 mg solid substrates is herein proposed for automatic ascertainment of trace element (TE) bioaccessibility in soils under worst-case conditions as per recommendations of ISO norms. A unified bioaccessibility/BARGE method (UBM)-like physiological-based extraction test is evaluated for the first time in a dynamic format for accurate assessment of in-vitro bioaccessibility of Cr, Cu, Ni, Pb and Zn in forest and residential-garden soils by on-line coupling of a hybrid flow set-up to inductively coupled plasma atomic emission spectrometry. Three biologically relevant operational extraction modes mimicking: (i) gastric juice extraction alone; (ii) saliva and gastric juice composite in unidirectional flow extraction format and (iii) saliva and gastric juice composite in a recirculation mode were thoroughly investigated. The extraction profiles of the three configurations using digestive fluids were proven to fit a first order reaction kinetic model for estimating the maximum TE bioaccessibility, that is, the actual worst-case scenario in human risk assessment protocols. A full factorial design, in which the sample amount (400-800 mg), the extractant flow rate (0.5-1.5 mL min(-1)) and the extraction temperature (27-37°C) were selected as variables for the multivariate optimization studies in order to obtain the maximum TE extractability. Two soils of varied physicochemical properties were analysed and no significant differences were found at the 0.05 significance level between the summation of leached concentrations of TE in gastric juice plus the residual fraction and the total concentration of the overall assayed metals determined by microwave digestion. These results showed the reliability and lack of bias (trueness) of the automatic biomimetic extraction approach using digestive juices.

Dynamic flow-through extraction/fractionation methods have recently drawn much attention as appealing alternatives to the batchwise steady-state counterparts for the evaluation of environmentally available pools of potentially hazardous trace elements in solid matrices. The most critical weakness of flow-based column approaches lies in the small amount of solid that can be handled, whereby their applicability has been merely limited to date to the extraction of trace elements in highly homogeneous solid substrates; otherwise the representativeness of the test portion might not be assured. To tackle this limitation, we have devised an automated flow-through system incorporating a specially designed extraction column with a large volume capacity, wherein up to 2 g of solid sample could be handled without undue backpressure. The assembled flow setup was exploited for fast screening of potentially hazardous trace elements ( namely , Cd, Cr, Cu, Pb, and Zn) in highly inhomogeneous municipal solid waste incineration (MSWI) bottom ashes. The pools of readily mobilizable metal forms were ascertained using the Toxicity Characteristic Leaching Procedure (TCLP) based on the usage of 0.1 mol L −1 CH 3 COOH as leachant and analysis of extracts by inductively coupled optical emission spectrometry. The application of a two-level full factorial (screening) design revealed that the effect of sample fluidization primarily but other experimental factors such as the solid to liquid ratio and extractant flow rate significantly influenced the leachability of given elements in raw bottom ashes at the 0.05 significance level. The analytical performance of the novel flow-based method capitalized on fluidized-bed extraction was evaluated in terms of accuracy, through the use of mass balance validation, reproducibility and operational time as compared to batchwise extraction and earlier flow injection/sequential injection microcolum-based leaching tests.

There is a current worldwide interest for evaluating the potential reuse of municipal solid waste incineration (MSWI) bottom ash as a sub-base in road construction and secondary building material. Yet, there is a need for exploration of the physicochemical features of the bottom ashes to ensure environmental sustainability. To this end, batchwise water extraction as promulgated by the European norm EN 12457 or the German DIN 38414-S4 tests is commonly utilized to ascertain the impact of leachable trace elements in bottom ashes on biota. However, the above extraction protocols are not properly simulating the dynamic extraction conditions occurring in the nature, whereby the analytical information provided for risk assessment is debatable. In this work, a downscaled flow-through extraction method is proposed for mimicking the leaching of hazardous trace elements (namely, Pb, Zn, Cd, Cu and Cr) in MSWI bottom ashes by runoff waters more accurately than the manual counterparts. The flow assembly facilitates the full automation of standard and regulatory leaching tests by packing of a suitable amount of solid material into a column, whereupon the leaching reagent is continuously pumped through, thus yielding an accurate assessment of the environmentally significant water-extraction fraction with no effect from readsorption phenomena. The flow-through column system is exploited as a screening tool for fast evaluation of the influence of natural bottom ash weathering on the immobilization of hazardous elements to dictate the potential reuse of the solid waste. The dependence of sorption sites for humic substances on trace element leachability is also discussed. As compared to the steady-state approach, the dynamic method features the substantial shortening of the analytical extraction protocol from 24h to just 30min, better precision, with relative standard deviations (R.S.D.)11% versus20% R.S.D. for batchwise extraction, improved accuracy because of the absence of metal redistribution phenomena and minimization of manual operations as well as straightforward investigation of leaching rates for the suite of target elements.