Search

The concept of a one-health approach in regenerative medicine has gained tremendous momentum in the scientific and public communities in recent years. Knowledge derived from this approach informs innovative biomedical research, clinical trials, and practice. The ultimate goal is to translate regenerative strategies for curing diseases and improving the quality of life in animals and people. Building and fostering strong and enthusiastic interdisciplinary and transdisciplinary collaboration between teams with a wide range of expertise and backgrounds is the cornerstone to the success of the one-health approach and translational sciences. The veterinarian's role in conducting clinical trials in client-owned animals with naturally occurring diseases is critical and unique as it may potentially inform human clinical trials. The veterinary regenerative medicine and surgery field is on a steep trajectory of discoveries and innovations. This manuscript focuses on oromaxillofacial-region regeneration to exemplify how the concept of interdisciplinary and transdisciplinary collaboration and the one-health approach influenced the authors' work experience at the University of California-Davis.

ObjectiveTo evaluate the biomechanical properties of the mandibles of cats with experimentally created osteotomies simulating oblique ramus fractures, which were stabilized with malleable L-miniplates with either locking screws [locking construct (LC)] or nonlocking screws [nonlocking construct (NLC)], compared with those for intact mandibles.Samples20 mandibles from 10 adult cat cadavers.ProceduresA block study design was adopted to allocate the mandibles of each cadaver to 2 of the 3 test groups (LC, NLC, or intact mandible). Mandibles within each cadaver were allocated systematically to a test group. For mandibles assigned to an LC and an NLC, a complete oblique osteotomy was performed from the mid rostral aspect of the ramus in a caudoventral direction. All mandibles were loaded in a single-load-to-failure test through cantilever bending. Load and actuator displacement were recorded simultaneously. Mode of failure and radiographic evidence of damage to tooth roots and the mandibular canal were evaluated. Biomechanical properties were compared among the groups.ResultsNo iatrogenic tooth root damage was evident, but all mandibles with an LC and an NLC had evidence of screw invasion into the mandibular canal. Plated mandibles had significantly less stiffness and bending moment than intact mandibles. Stiffness was not significantly different between the LC and the NLC; the NLC had a greater bending moment at failure than the LC. The pre-yield stiffness of plated mandibles decreased when the number of screw holes overlapping the mandibular canal increased.Clinical relevanceThe use of a malleable L-miniplate in a caudal mandibular fracture model is feasible. Both the LC and the NLC were inferior mechanically to intact mandibles. Type of construct used did not affect the construct stiffness significantly in tested mandibles.

ObjectiveTo identify associations between microbes and host genes in cats with feline chronic gingivostomatitis (FCGS), a debilitating inflammatory oral mucosal disease with no known cause, compared with healthy cats and cats with periodontitis (control cats).Animals19 control cats and 23 cats with FCGS.ProceduresAt least 1 caudal oral mucosal swab specimen was obtained from each cat. Each specimen underwent unbiased metatranscriptomic next-generation RNA sequencing (mNGS). Filtered mNGS reads were aligned to all known genetic sequences from all organisms and to the cat transcriptome. The relative abundances of microbial and host gene read alignments were compared between FCGS-affected cats and control cats and between FCGS-affected cats that did and did not clinically respond to primary treatment. Assembled feline calicivirus (FCV) genomes were compared with reverse transcription PCR (RT-PCR) primers commonly used to identify FCV.ResultsThe only microbe strongly associated with FCGS was FCV, which was detected in 21 of 23 FCGS-affected cats but no control cats. Problematic base pair mismatches were identified between the assembled FCV genomes and RT-PCR primers. Puma feline foamy virus was detected in 9 of 13 FCGS-affected cats that were refractory to treatment and 5 healthy cats but was not detected in FCGS-affected cats that responded to tooth extractions. The most differentially expressed genes in FCGS-affected cats were those associated with antiviral activity.Conclusions and clinical relevanceResults suggested that FCGS pathogenesis has a viral component. Many FCV strains may yield false-negative results on RT-PCR-based assays. Coinfection of FCGS-affected cats with FCV and puma feline foamy virus may adversely affect response to treatment.

OBJECTIVE:To evaluate and quantify the kinematic behavior of canine mandibles before and after bilateral rostral or unilateral segmental mandibulectomy as well as after mandibular reconstruction with a locking reconstruction plate in ex vivo conditions. SAMPLE:Head specimens from cadavers of 16 dogs (range in body weight, 30 to 35 kg). PROCEDURE:Specimens were assigned to undergo unilateral segmental (n = 8) or bilateral rostral (8) mandibulectomy and then mandibular reconstruction by internal fixation with locking plates. Kinematic markers were attached to each specimen in a custom-built load frame. Markers were tracked in 3-D space during standardized loading conditions, and mandibular motions were quantified. Differences in mandibular range of motion among 3 experimental conditions (before mandibulectomy [ie, with mandibles intact], after mandibulectomy, and after reconstruction) were assessed by means of repeated-measures ANOVA. RESULTS:Both unilateral segmental and bilateral rostral mandibulectomy resulted in significantly greater mandibular motion and instability, compared with results for intact mandibles. No significant differences in motion were detected between mandibles reconstructed after unilateral segmental mandibulectomy and intact mandibles. Similarly, the motion of mandibles reconstructed after rostral mandibulectomy was no different from that of intact mandibles, except in the lateral direction. CONCLUSIONS AND CLINICAL RELEVANCE:Mandibular kinematics in head specimens from canine cadavers were significantly altered after unilateral segmental and bilateral rostral mandibulectomy. These alterations were corrected after mandibular reconstruction with locking reconstruction plates. Findings reinforced the clinical observations of the beneficial effect of reconstruction on mandibular function and the need for reconstructive surgery after mandibulectomy in dogs.

OBJECTIVE: To evaluate the kinematics and stability of the temporomandibular joint (TMJ) of cats and dogs with and without a TMJ replacement (TMJR) prosthesis under simulated bite forces and mouth opening. ANIMALS: Sixteen cadaver skulls from domestic cats (n = 8) and medium- to large-breed dogs (n = 8). METHODS: Intact TMJs were tested. Following condylectomy and coronoidectomy, the skulls were fitted with a TMJR prosthesis unilaterally and retested. Prosthesis was similarly implanted in the contralateral TMJ in 4 cats and 4 dogs before retesting. Left and right bite motions were evaluated before bite contact to peak bite force (200 N in dogs, 63 N in cats). Mouth opening motion was recorded. Mandibular displacement under load was evaluated in 3 orthogonal planes. Maximal displacement was compared between TMJR groups and native TMJ. Prosthesis-bone motion of the temporal and mandibular components was evaluated during simulated bites and mouth opening. RESULTS: TMJR resulted in joint motion not demonstrably different from the native TMJ, with the ability to fully open and close the mouth and with minimal laterotrusion. The TMJR prosthesis demonstrated similar stability after unilateral and bilateral replacement during bite force and with an open mouth. Mean implant-bone motion during bite simulations for the temporal and mandibular TMJR components was ≤ 60 µm in cats and ≤ 30 μm in dogs. CLINICAL RELEVANCE A novel TMJR can be implanted and allows normal jaw motion. Joint stability is maintained after TMJR implantation in the TMJ of dogs and cats TMJ that is devoid of muscular support. [ABSTRACT FROM AUTHOR]

OBJECTIVE To evaluate the diagnostic yield of dental radiography (Rad method) and cone-beam CT (CBCT) methods for the identification of 31 predefined dental disorders in brachycephalic dogs. ANIMALS 19 client-owned brachycephalic dogs admitted for evaluation and treatment of dental disease. PROCEDURES 31 predefined dental disorders were evaluated separately and scored by use of dental radiography and 3 CBCT software modules (serial CBCT slices and custom cross sections, tridimensional rendering, and reconstructed panoramic views). A qualitative scoring system was used. Dental disorders were grouped into 10 categories for statistical analysis. Point of reference for presence or absence of a dental disorder was determined as the method that could be used to clearly identify the disorder as being present. Accuracy, sensitivity, specificity, and positive and negative predictive values were calculated with the McNemar χ2 test of marginal homogeneity of paired data. RESULTS When all 3 CBCT methods were used in combination, the diagnostic yield of CBCT was significantly higher than that of dental radiography for 4 of 10 categories (abnormal eruption, abnormally shaped roots, periodontitis, and tooth resorption) and higher, although not significantly so, for all categories, except for 1 (loss of tooth integrity). CONCLUSIONS AND CLINICAL RELEVANCE CBCT provided more detailed information than did dental radiography. Therefore, CBCT would be better suited for use in diagnosing dental disorders in brachycephalic dogs.

OBJECTIVE To evaluate the diagnostic yield of dental radiography (Rad method) and 3 cone-beam CT (CBCT) methods for the identification of predefined anatomic landmarks in brachycephalic dogs. ANIMALS 19 client-owned brachycephalic dogs admitted for evaluation and treatment of dental disease. PROCEDURES 26 predefined anatomic landmarks were evaluated separately by use of the RAD method and 3 CBCT software modules (serial CBCT slices and custom cross sections, tridimensional rendering, and reconstructed panoramic views). A semiquantitative scoring system was used, and mean scores were calculated for each anatomic landmark and imaging method. The Friedman test was used to evaluate values for significant differences in diagnostic yield. For values that were significant, the Wilcoxon signed rank test was used with the Bonferroni-Holm multiple comparison adjustment to determine significant differences among each of the 6 possible pairs of diagnostic methods. RESULTS Differences of diagnostic yield among the Rad and 3 CBCT methods were significant for 19 of 26 anatomic landmarks. For these landmarks, Rad scores were significantly higher than scores for reconstructed panoramic views for 4 of 19 anatomic landmarks, but Rad scores were significantly lower than scores for reconstructed panoramic views for 8 anatomic landmarks, tridimensional rendering for 18 anatomic landmarks, and serial CBCT slices and custom cross sections for all 19 anatomic landmarks. CONCLUSIONS AND CLINICAL RELEVANCE CBCT methods were better suited than dental radiography for the identification of anatomic landmarks in brachycephalic dogs. Results of this study can serve as a basis for CBCT evaluation of dental disorders in brachycephalic dogs.

OBJECTIVE To evaluate biomechanical properties of intact feline mandibles, compared with those for mandibles with an experimentally created osteotomy that was stabilized with 1 of 2 internal fixation configurations. SAMPLE 20 mandibles from 10 adult feline cadavers. PROCEDURES An incomplete block study design was used to assign the mandibles of each cadaver to 2 of 3 groups (locking plate with locking screws [locking construct], locking plate with nonlocking screws [nonlocking construct], or intact). Within each cadaver, mandibles were randomly assigned to the assigned treatments. For mandibles assigned to the locking and nonlocking constructs, a simple transverse osteotomy was created caudal to the mandibular first molar tooth after plate application. All mandibles were loaded in cantilever bending in a single-load-to-failure test while simultaneously recording load and actuator displacement. Mode of failure (bone or plate failure) was recorded, and radiographic evidence of tooth root and mandibular canal damage was evaluated. Mechanical properties were compared among the 3 groups. RESULTS Stiffness, bending moments, and most post-yield energies for mandibles with the locking and nonlocking constructs were significantly lower than those for intact mandibles. Peak bending moment and stiffness for mandibles with the locking construct were significantly greater than those for mandibles with the nonlocking construct. Mode of failure and frequency of screw damage to tooth roots and the mandibular canal did not differ between the locking and nonlocking constructs. CONCLUSIONS AND CLINICAL RELEVANCE Results indicated that both fixation constructs were mechanically inferior to intact mandibles. The locking construct was mechanically stronger than the nonlocking construct.

OBJECTIVE To evaluate the biomechanical properties of the mandibles of cats with experimentally created osteotomies simulating oblique ramus fractures, which were stabilized with malleable L-miniplates with either locking screws [locking construct (LC)] or nonlocking screws [nonlocking construct (NLC)], compared with those for intact mandibles. SAMPLES 20 mandibles from 10 adult cat cadavers. PROCEDURES A block study design was adopted to allocate the mandibles of each cadaver to 2 of the 3 test groups (LC, NLC, or intact mandible). Mandibles within each cadaver were allocated systematically to a test group. For mandibles assigned to an LC and an NLC, a complete oblique osteotomy was performed from the mid rostral aspect of the ramus in a caudoventral direction. All mandibles were loaded in a single-load-to-failure test through cantilever bending. Load and actuator displacement were recorded simultaneously. Mode of failure and radiographic evidence of damage to tooth roots and the mandibular canal were evaluated. Biomechanical properties were compared among the groups. RESULTS No iatrogenic tooth root damage was evident, but all mandibles with an LC and an NLC had evidence of screw invasion into the mandibular canal. Plated mandibles had significantly less stiffness and bending moment than intact mandibles. Stiffness was not significantly different between the LC and the NLC; the NLC had a greater bending moment at failure than the LC. The pre-yield stiffness of plated mandibles decreased when the number of screw holes overlapping the mandibular canal increased. CLINICAL RELEVANCE The use of a malleable L-miniplate in a caudal mandibular fracture model is feasible. Both the LC and the NLC were inferior mechanically to intact mandibles. Type of construct used did not affect the construct stiffness significantly in tested mandibles. [ABSTRACT FROM AUTHOR]