Search

In comparison to single reinforced materials, aluminum hybrid metal matrix composites offer superior mechanical and tribological capabilities. Because of the abrasive reinforcing phases that severely wear down tools, it is very difficult to machine aluminum hybrid MMCs using ordinary tool materials. Tool wears increases with increasing reinforcing in a composite. Every industrial business demands maximal material removal with minimum tool wear and surface roughness. The review of ideal machining conditions for maximizing material removal rate, minimizing tool wear rate, and minimizing surface roughness is presented in this paper. The impact of machining process parameters on performance metrics in hybrid metal machining, including material removal rate (MRR), tool wear rate, and surface roughness were studied through various literatures. [ABSTRACT FROM AUTHOR]

Anaerobic fermentation is a highly promising technology for converting biomass waste into methane, which may directly be used as an energy source. The objective of this research was to investigate production rate of biogas from camel dung, chicken dropping and vegetable waste. Attempts have been made in this study to optimize various parameters in order to determine the most favorable conditions for maximum biogas production from three different types of wastes such as camel dung (CAD), chicken droppings (CHD) and vegetable waste (VW). The amount of biogas produced from the wastes is compared as: VW >CHD>CAD. The results showed that biogas produced from VW is 720 ml in 32 days as compared to CHD and CAD which are 600 ml in 36 days and 80 ml in 40 days respectively. The effect of the pH and temperature on the amount of biogas produced was also studied. The experiments were conducted in temperatures ranging from 36 °C to 44 °C. [ABSTRACT FROM AUTHOR]

Energy is needed to run almost everything we see around us, from cars to the electricity power generation plants and everything else. Fossil fuels produce harmful products on combustion. One such eco-friendly alternative is Di-Methyl Ether also known as DME. In this study, a DME plant of capacity 160 tons per day was designed. Methanol dehydration process has been adapted as the process of production. The purity of DME from this plant is 99.5% by weight. Distillation column T-202 and heat exchanger E-208 were designed in detail. The detail design results showed that T-202 needed 6 stages for separation and a column diameter of 1.28m, while the simulation results showed 7 stages and column diameter as 1.285m for the same separation process. Furthermore, E-208 is of type 1-2 shell & tube heat exchanger with 307 tubes and tube length of 5.5m, however the Aspen EDR simulation results were also in close agreement with 304 tubes and 5m length for the same heat exchanger. This paper presents the results of simulation results of the simulation of these equipment's and full plant done using Aspen plus V8.8 software and Aspen EDR. [ABSTRACT FROM AUTHOR]