Search

Wood is biomass made from lignocellulose, the main raw material for pulp production, both species of hardwood and softwood. Utilization of as much wood as possible, including less-known wood species, is widely open because the availability of good quality wood for industry raw materials is increasingly limited. In general, all wood species can be used for paper pulp. But the selection of types of lignocellulosic material with specific properties, such as physical, anatomical and chemical, play an important role in efficiently using wood as raw materials for pulp and paper. This research was carried out to examine wood properties (specific gravity, fiber quality and cellulose content) of four less-known hardwoods from natural tropical rainforest in South Sulawesi province of Indonesia and assessed their potential use for paper pulp. Those hardwood species comprised of cempedak (Artocarpus integer Merr.), jabon merah (Anthocephalus macrophyllus Hav.), saling-saling (Artocarpus teysmanii Miq.) and simpur (Dillenia serrata Thunb.). The specific gravity determined by the weight of oven dried wood and volume of air dried wood where the wood volume be measured by water immersion method, the fiber dimensions measured through maceration preparations which was made using the Franklin procedure, while TAPPI method used for chemical analysis. In condition to paper pulp raw material, the specific gravity (0.40 – 0.69) is categorized as moderate, the fiber quality is classified as good (class II), and cellulose content (40.12% - 52.47%) is categorized as moderate to high for all those less-known hardwoods. All four less-known hardwoods studied potentially use for paper pulp raw materials. But simpur has the most potential due to long fiber and higher specific gravity. [ABSTRACT FROM AUTHOR]

This study aims to analyze Indonesia's strategy in facing the Voluntary Partnership Agreement on Forest Law Enforcement Governance and Trade (FLEGT-VPA) cooperation agreement between the European Union and Indonesia to improve the export performance of Indonesian wood products to the European Union market. With research, an analysis of the opportunities and challenges that Indonesia intends to face in maintaining the stability of the export activities of Indonesian wood products and improving the quality of these wood products so that they can be accepted based on the standards of the destination country. FLEGT-VPA is a bilateral agreement between the European Union and timber exporting nations to improve forest sector governance and ensure that timber and wood products supplied into the EU are produced in line with partner country laws and regulations. The issue that a developing country like Indonesia wants to experience in an effort to improve the quality of wood products according to the standards of the destination country is a large number of illegal logging, illegal timber sales and others. This study focuses on the pulp and paper industry and uses qualitative analysis research methods and analyzes the data collection techniques from various sources. The increase in the export performance of Indonesian pulp, paper and, paperboard to the European Union from 2016 after the ratification of the FLEGT-VPA shows that the quality of Indonesian products is promising to spread in the European Union market. [ABSTRACT FROM AUTHOR]

The pulp and paper making industry is looking for new main raw material based on its physical, chemical and morphological characteristics. Currently in this industry, bagasse is the most useful raw material in pulp and paper industry. The objective of this study is to determine its suitability for pulping. Acacia auriculiformis is a fast-growing tree normally found in Indonesia and Australia. Acacia auriculiformis leaf contains of cellulose, hemi-cellulose and lignin. The range of lignin content in Acacia auriculiformis is 19%-20%. The hemi-cellulose and lignin contents was removed by soda-pulping process using different concentrations as followed; 3%, 5%, 10%, 15% and 20%. In order to determine the optimum pulping conditions for Acacia auriculiformis craft paper, several tests were conducted such as apparent density, tear test, tensile strength test and moisture absorption. It was found that the Acacia auriculiformis fibre treated with 3% sodium hydroxide (NaOH) solutions gave good tear test of the paper. For apparent density test, the best concentration of NaOH used for treating Acacia auriculiformis pulping is at 15%. From the study, the optimum concentration of NaOH in treating Acacia auriculiformis fibre is at 5% for best result in tensile strength. Hence, from the overall tests, 5% concentration of NaOH is the optimum value. From the findings, Acacia auriculiformis fibre has a potential to be used in paper making and food packaging industry. [ABSTRACT FROM AUTHOR]

The rapid development of the industrial sector has increased either energy demand or generate a tremendous effect on waste piles. To combat the issue of poor sanitation due to waste accumulation and multiply the energy sources, the government promotes energy diversification, particularly dealing with waste management. This study aims to recycle plastic waste, paper waste and sawdust into solid fuel briquettes while observing their physical and combustion properties. Briquette production is carried out by combining waste of plastics and sawdust with binding agents, such as paper pulp and cassava starch. These materials were mixed with water, being compacted and conventionally dried under the sunlight. Solid briquette was then tested for calorific value, moisture content and volatile matter to ensure the effectiveness of combustion. The results show that the modified composition of plastic and paper with the ratio of 3:1 is physically sturdy with minor cracks, has a greater calorific value of 6801.62 Cal/gr, low moisture content (4.73%) and volatile matter (5.50%). The modified composition of paper: plastic: sawdust with the ratio of 1:1:1 exhibits more sturdy stuff, with a calorific value of 4565.47 Cal/ gr, low moisture content (1.85%) but high volatile matter (34.07%). Waste conversion to solid fuel briquette can be utilized as future green energy alternative in any major cities of Indonesia. A modified mixture of plastic : paper waste is more prone to transmit the heat despite having less capability to ignite, while the mixture of sawdust : paper is more prone to ignite despite having less capability to store and dismiss the heat. [ABSTRACT FROM AUTHOR]

Borassus flabellifer L. becomes one of the palm-based commodities in Indonesia that can grow well in dry areas, especially around the north coast of Java Island. An abundant waste of this plant, in the form of leaf midrib and fruit fiber, has a potential as a source of lignocellulose for the paper industry. In the present study, Kraft paper production was conducted to know the influence of the proportion of leaf midrib and fruit fiber of Borassus flabellifer L., and the concentration of Polyvinyl Acetate (PVAc) adhesives on the sensory and physical quality of Kraft paper. The research method was a Randomized Block Design (RBD) with two factors. The Friedman test was used to determine the sensory quality of Kraft paper. The ANOVA analysis was used to examine the physical quality of Kraft paper. The results showed that the treatment of raw material proportion and PVAc adhesive concentration had significant effect on color, surface texture, yield, and tensile resistance, but insignificant between treatment of Gramatur and tear resistance. The best treatment of sensory tests was Kraft paper with proportion of 50% leaf midrib pulp, 50% fruit fiber pulp, and 7.5% PVAc adhesive concentration. It has a yield value of 72.11%, Gramatur of 162.80 (g/m²), tensile strength of 1.70 (%), and tear resistance of 197.6 (gf). [ABSTRACT FROM AUTHOR]

Moodle-based Learning Management Systems have been widely used in learning during the Covid-19 pandemic, especially in Indonesia. In this regard, this study aims to identify and describe the implementation of the Whole Language Approach in improving the ability to write simple scientific papers for students at PGRI Yogyakarta University through the Moodle-based Learning Management System. The method in this research is descriptive qualitative with data in the form of descriptions of the results of research implementation supported by observations, interviews, theoretical studies, and relevant research. The results of this study indicate an increase in the ability to write student scientific papers in the experimental class after using the Whole Language Approach through Moodle-based LMS in learning to write. Several aspects that were assessed were structure, systematics, language use, content coherence, and references used. This increase is indicated by the test numbers before and after the use of the Whole Language Approach through the Moodle-based LMS with mean values of 6.5 to 8.8 in the experimental class, and 6.7 to 7.1 in.the control class. This shows that the use of the Whole Language Approach through Moodle-based LMS is proven to improve students' ability to write simple scientific papers. [ABSTRACT FROM AUTHOR]

Paper waste production in DKI Jakarta according to data from The Jakarta's Environmental Services reaches an average of 40% of total waste production per month for each municipality (kotamadya). On the other hand, Indonesia's necessity of construction development, notably residential home, is increasing constantly along with the amount of Indonesia's population. This condition stimulates innovation of eco-friendly, inexpensive building material with suitable strength. Since 1990's, papercrete, concrete with waste paper as substitution of fine and/ or coarse aggregate, has been studied. Its use for structural materials has evolved and required supporting research for application on larger structural components. In this research, homogeneity aspect of papercrete from domestic waste (office) is investigated along a certain height of vertical beam. To do so, Ultrasonic Pulse Velocity (UPV) propagation measurement on 5 vertical prismatic beam specimens was conducted. By using direct mode transmission, two transducerswere used through 15 cm of width. Rate of propagation can detect the density of concrete at each level since early age of concrete (2 hour after casting). It describes the distribution of material inside. This homogeneity study is beneficial in evaluating papercrete application in real beam structure in the future. [ABSTRACT FROM AUTHOR]

Indonesia has targeted to reach 23% of renewable energy share by 2025. In order to meet the target, many researchers have focused on the explorations of renewable energy resources. One of the potential solutions to meet the target is the agricultural wastes, include corn cobs and areca nut fiber. In this study, the calorific value of corn cobs and areca nut fiber are tested. The corn cobs and areca nut fiber are collected from the farmers in Sumatera Utara province of Indonesia. In addition, the Paper waste is also tested. A bomb calorimeter of IKA C6000 is used to measure the energy content of the biomass. The results show that the calorific value of Corn cobs and Areca nut fiber is 5573 Cal/g and 4946 Cal/g, respectively.By using the average yearly production of Corn and Areca nut, these calorific values similar to 4,539 TOE and 4,653 TOE, respectively. If the potency can be used to replace the coal as an alternative fuel, this potency will reduce the Greenhouse gas (GHG) emission. The potency of mitigation GHG by replacing Corncob and Areca nut fiber are 18,306 and 18,491 ton of CO2e. [ABSTRACT FROM AUTHOR]

The energy demand in Indonesia increases continuously, but its availability is thinning out. Therefore, an alternative energy where the source is bountiful but has not been used properly is needed, such as used paper. This used paper is usually produced by office activities, educational institutions, even home activities. The used paper contains very high cellulose since the lignin contained in the raw material has been removed during the pulping process. Cellulose is a polymeric compound consisting of glucose monomers. The hydrolysis of cellulose is able to produce glucose which subsequently can be fermented into bio-ethanol. A study on hydrolysis of used paper to produce glucose as the raw material of bio-ethanol is urgent to conduct. The present work studied the hydrolysis of used paper using acid catalyst (sulfuric acid, chloride acid), which was heated in a microwave equipped with a cooling set up to avoid the evaporation of hydrolysate. The level of glucose in the hydrolysate was affected linearly by the acid concentration, hydrolysis time, and microwave power. Using chloride acid 2N for 7 hours, the hydrolysis produced glucose with a level of 76.542%, and 59.532% for sulfuric acid 3N. [ABSTRACT FROM AUTHOR]

Changes in water quality can be shown in physical, chemical and biological indicators. The presence of phytoplankton can be used as a bioindicator to evaluate changes in water quality and fertility in a water. The purpose of this study was to determine the abundance and biological index of phytoplankton in the Ir.H. Djuanda Reservoir. The method used is a survey. Types of phytoplankton obtained in the results of the study consisted of 6 classes and 36 species. The average abundance of phytoplankton in the waters of the Ir. H. Djuanda ranged from 23809 – 98810 cells/l. The results of the analysis of diversity (H') = 1.78 – 2.53, uniformity index (E) = 0.62 – 0.8 and dominance index (C) = 0.12 – 0.28. These results indicate that the diversity of phytoplankton in the Ir. H. Djuanda has moderate diversity, high uniformity and no dominance. Based on the value of the diversity index, it shows that the reservoir is classified as lightly polluted. [ABSTRACT FROM AUTHOR]