Search

In recent years a new type of pavement has gained popularity in the United Kingdom this type is called Semi flexible Pavements (SFP). It consists of porous asphalt with high air voids between (25-35) % and is filled with cementitious grout materials. SFP is a combination road surface that incorporates the effects of both porous asphalt and cement paste grout. In addition it has proven to function well in strongly loaded freeways and airport pavement. The primary goal of this research was to assess the performance and durability of SFP contained sustainable grout material. The Reed Waste Ash (RWA) was adopted as a partial replacement for conventional grout material and Ordinary Portland cement (OPC) used in SFP. Also superplasticizer (SP) was used to improve the fluidity of grout and waste paper fiber (W-PF) was used as a modifier for asphalt binder. The indirect Tensile Stress (ITS) and Tensile Strength Ratio (TSR) tests were used to evaluate the resistance of new SFP to cracking and moisture susceptibility while the wheel track test was used to assess the resistance to permanent deformation. The results showed that the SFP containing OPC+10% RWA enhanced the moisture susceptibility of SFP up to 83.52 %. In addition, the result of the abrasion test of the SFP mixture containing OPC+10%RWA gives a great improvement, reached to 55% and 88% for unaged and aged specimens, respectively, when compared to the control mix. The rutting resistance was improved by 85% for the above mentioned replacement. [ABSTRACT FROM AUTHOR]

One of the biometrics that is used to analyze and measure the features of any individual for security and authentication purposes is the fingerprint. purposes, and it is one of the most grown biometric types and considered legal proof of guide in a court of law all over the worldwide. The techniques that is used to find the matching between different fingerprint images have been varied Over the past few years, the researcher in this topic use several methods to extract the essential features, and use these features as input to different matching techniques in inked fingerprint recognition system.in this paper we will discuss in details the contents of fingerprint recognition system and how it is work and a several number of techniques and methods used by the researchers in this top and we made a compression between the widely used techniques to reach the best in terms of accuracy. [ABSTRACT FROM AUTHOR]

In order to accommodate the country's growing population, the number of apartment complexes has increased dramatically. Most new apartment complexes include a variety of modern amenities such as a supermarket, a medical centre, EV charging stations, vending machines, and many more. To use these amenities, we normally need to have a credit or debit card, or even cash on hand. Also, there are numerous identity and government cards that a person must carry with them at all times. Keeping track of all these cards can prove to be quite tedious and time-consuming. Furthermore, the majority of these apartments feature the standard lock and key method of unlocking the doors of the residing occupants which adds to the load of carrying about house keys along with all of the other cards. Life would be so much easier if we could replace all of these numerous bank cards with just one. Using a single card to access all services, such as EV charging or purchasing items, and even as your home door key. With the tap and go feature, the user does not have to pay at the same time but can make a payment all at once when the statement arrives at the end of the month, saving both time and keeping track of all transactions with ease. Hence, we propose in this paper a smart card that uses RFID technology to access all of the many amenities in apartment complexes. [ABSTRACT FROM AUTHOR]

The paper describes a smart home control system, which includes lighting, microclimate and security subsystems, as well as control algorithms for various operating scenarios. The process of the system operation is described in detail, the visualization of the system is presented in the form of a 3d model. The article shows the practical significance of the system, describes its functionality. The work is of undoubted relevance, since the introduction of a house management system can improve conditions of life and achieve high energy efficiency rates. The article presents in detail each element of the control system, namely: a control device, a control object, a set of sensors. On the example of the lighting subsystem, the process of creating the entire automated control system is described. An algorithm for automatic lighting operation is obtained and described. To control the system, a human-machine interface was developed in the OpenHab program. A panel with indicators of the light sensor is presented, its functionality is described. [ABSTRACT FROM AUTHOR]

The potential of Waste paper sludge (WPS) and cockle shell (CS) as an alternative composite absorbent has been investigated to obtain the optimum mixing ratio in removing two working parameters such as ammonia nitrogen (NH3-N) and COD. Both WPS and CS were mixed together in different ratio. The absorption batch study includes the preparation of 5g composite adsorbent, 200 mL of raw leachate sample at pH 8.64, with a shaking speed of 200 rpm for 300 minutes at room temperature. The result shows, the optimum ratio obtained for composite mixture absorbent is (1:7) and the concentration capacity achieved for the ratio was 502 mg/L and 540 mg/L for NH3-N and COD. The percentage optimum removal is 50.20% NH3-N and 81.25% COD respectively. The optimum pH and absorbent dosage expressed the result at pH 7 and 50 g with the percentage optimum removal value is 50.10% NH3-N and 88.89% COD; and 503 mg/L NH3-N and 320 mg/L COD; and 51.98% NH3-N and 89.51% COD; and 484 mg/L NH3-N and 302 mg/L COD, respectively during the experiment. [ABSTRACT FROM AUTHOR]

Rice straw can be an alternative material for producing great pulp and paper also can be produced by several variations of the pulping process. This study was conducted to prepare and evaluate the hydrophobic rice straw pulp soda using atmospheric hot soda (AHSP) and soda (SP) pulping methods and modified with water-soluble chitosan treatment. The pulps were modified with water-soluble chitosan treatment at 1% and 2%. The screen pulp yield, kappa number, and delignification selectivity were analyzed to evaluate the properties of the pulp, while hydrophobicity properties were evaluated by its water absorption capacity and wettability. The FTIR was used to investigate the possibility of a new functional group formation after modification. The screen pulp yield of AHSP (29.22%) was relatively higher than SP (21.94%). However, SP pulp has a lower kappa number with higher delignification selectivity than AHSP pulp. After pulp modification, the hydrophobicity of the modified pulp increases in line with the increasing concentration of water-soluble chitosan. The AHSP pulp with a 2% water-chitosan treatment has the highest hydrophobicity indicated by the lowest water absorption capacity at 60 minutes i.e 41.99%. Therefore, based on hydrophobicity analysis, AHSP and SP modified with a 2% water-soluble chitosan treatment have better hydrophobicity. [ABSTRACT FROM AUTHOR]

Polar code is a class of linear error-correcting codes that may demonstrably achieve the capacity of discrete memoryless channels. In the last decade, they have piqued the interest of industry and academia, such as the 5G (5th generation) wireless communication system standardization process. Although polar codes are proven to achieve the Shannon limit, their performance degrades at finite-code lengths, particularly in low signal-to-noise ratio (SNR) environments. So in a regime with finite _length, the performance of polar code may be improved by several techniques, such as Turbo Polar Codes (TPCs). Various Soft_in_Soft_out (SISO) decoder techniques, such as soft_cancellation (SCAN), belief_propagation (BP), and soft_successive_cancellation_list (SSCL) can be utilized in TPC. On the other hand, using a simple scaling factor scheme to minimize the overestimation of extrinsic information and its correlation with intrinsic information can further improve performance. Different termination techniques are proposed in the literature to reduce the required number of iterations, especially at high SNR. Error detection and correction systems are utilised to reduce energy consumption. This paper reviews some of the recent decoding techniques used in TPC. [ABSTRACT FROM AUTHOR]

Paper Correlation is the study of creating an automated machine to assess the relationship between two or more papers. This study continues to develop in the natural language processing field. In this paper, we begin to enter into this study by conducting research to find the relationship between two citation sentences. The citation sentences contained in the paper can be used as a basis for assessing the relationship between two papers. In this research, the semantic similarity between citation sentences is included in.8 semantic classes. We use the Recurrent Neural Networks method and its variations and use SMOTE to deal with imbalanced data. The data representation that we use is word2vec to convert the sentence into a vector. We develop this research by adding data to see the algorithm's capabilities from previous research. [ABSTRACT FROM AUTHOR]

A concept of the smart contract powered by Ethereum has raised the attention of investors in the crypto-currency market in the light of the distributed account book techniques in the Era of Blockchain 2.0. Based on the digitalization of the financial tools, smart contract adopts the smart validation and execution of the computation protocols extending the blockchain to the application level of use to reinforce the security and transparency of transaction deals. This paper aimed to investigate the principle, functions, ground mechanism of the smart contract, and protection approaches and evaluated the security issues existed in the investment process. Lastly, the paper summarized the Smart Contract design and development, loopholes, and protection approaches in the Smart Contract applications. [ABSTRACT FROM AUTHOR]

Species producing raw material for pulp and paper that can be grown in the high altitude lands are still limited. One of the potential species for this area is Eucalyptus urophylla. Tree breeding strategy by a progeny test is performed to increase its productivity. The initial selection is implemented at the nursery level by assess the variation of family (mother trees' progeny) (F1). The research aimed to determine the F1 variation by the growth performance of 6 months old F1 seedlings. Samples consisted of progeny from 27 family originated from provenances of East Nusa Tenggara, Indonesia. Indicators of growth performance and determination of rankings are assessed from the seedling's diameter, height, and robustness. The results showed that E. urophylla had high growth performance variation. Based on their growth performance, the best seedlings were from the family of A25, A27, A23, A19, A20 and A21. Genetic diversity among F1 categorized moderate, based on heritability of height (H2=0.37), diameter (H2=0.45) and robustness (H2=0.6). Coefficient of genetic variance (CGV) and coefficient of phenotypic variance (CPV) are more than 20%, and 27 mother trees are divided into 4 clusters. The existence of genetic diversity at the seedling level becomes the material for further testing in the field. [ABSTRACT FROM AUTHOR]