Search

A novel electron-optical system is proposed for dual azimuthally stacked radial sheet electron beams (ARSEBs). The two sheet beams are emitted from curved surfaces of two cathodes and are focused by a focusing electrode, which is carefully designed to produce a symmetric field distribution for the two beams and to avoid interference between the beams. A common tunable periodic cusped magnetic focusing system is also designed to focus the two ARSEBs. The dual sheet beams are used in a traveling wave tube (TWT) consisting of a cascade of two azimuthally supported angular log-periodic strip-line (ASALS) slow-wave structures (SWSs). The transmission efficiency in the presence of beam–wave interaction is 93%. The particle-in-cell simulation results show that for a beam voltage of 4400 V and a current of 0.39 A, the proposed cascaded TWT has a maximum gain of 32.5 dB at 35 GHz and a maximum output power of 180 W; this is a significant gain improvement over a TWT using a single ASALS SWS. [ABSTRACT FROM AUTHOR]

In this paper, a novel angular log-periodic folded groove waveguide (ALFGW) slow-wave structure (SWS) has been investigated theoretically and experimentally for application in Ka-band traveling-wave tubes (TWTs). The dispersion relation for the ALFGW is derived analytically, and the dispersion characteristics are calculated for a Ka-band design. The designed SWS is fabricated using oxygen-free-copper that is silver electroplated. The measured cold-test parameters show good agreement with the simulation results, with S21 varying from −2.7 dB to −4.8 dB and S11 better than −13.6 dB over the frequency range of 30–38 GHz. Simulations of beam–wave interactions using a 4850 V and 0.4 A sheet beam with a high aspect ratio of 28:1 indicate an output power of 128 W, corresponding to a maximum gain and electronic efficiency of 18.1 dB and 6.6%, respectively. Due to the log-periodic form, a higher output power, higher efficiency, wider bandwidth, and lower operating voltage are achieved as compared to a TWT based on the conventional folded groove waveguide (FGW) SWS. These results show that the proposed ALFGW SWS has good potential for application in relatively high-power wideband TWTs. [ABSTRACT FROM AUTHOR]

In this paper, a mathematical physics model is set up to study dielectric constant profile of aqueous solvent in ionic solution, to revise Brownian dynamics simulation in ionic solution by considering time-variant dielectric constant profile with change in ion positions, and to study the effect of high-intensity electric pulses on the profile. The validation of the model is confirmed with verification calculations. By means of the proposed model, dielectric constant profiles in calcium chloride and sodium chloride solutions and their response to pulses are simulated. Based on numerical results, dielectric constants of aqueous solvent spatially vary instead of being the same value in ionic solutions. And the profiles are variant with time due to ion motion in solutions. From the profiles, overall dielectric constant in calcium chloride solution is lower than that in sodium chloride solution. And overall dielectric constant decreases with increment of solution concentration. In addition, the results show that influence on the profiles depends on solution concentration and field intensity of the pulse. The profile in solutions with low concentration is more vulnerable to the pulse than that with high concentration. And overall dielectric constant decreases dramatically as field intensity increases. Those understandings provide basis for application of pulses in biomedical engineering at the molecular level. Meanwhile, pulse radiation provides a potential way to constrain water molecules at room temperature reflected by significantly reducing dielectric constant, and to lower absorption loss of electromagnetic field in millimeter and far infrared band. [ABSTRACT FROM AUTHOR]