Search

In this paper, an analytical investigation is presented on the natural frequency analysis of sandwich plate resting on Winkler-Pasternak type elastic foundations in thermal environment. The sandwich plate consists of an auxetic honeycomb core with negative Poisson's ratio, which is assumed to perfectly bond to two carbon nanotube reinforced composite (CNTRC) face sheets to ignore potential interface effects or imperfections in bonding. The material properties of CNTRC are assumed to be temperature dependent. The volume fraction of carbon nanotube (CNT) varies through the thickness dimension according to linear functions with five different distribution patterns of CNT including UD, FG-O, FG-V, FG-Λ and FG-X. The governing equations of motion are derived based on the Reddy's first order shear deformation plate theory and Hamilton's principle, and the expression of the natural frequency is performed via Galerkin method. Artificial neural network (ANN) model is established to accurately predict the natural frequency of the sandwich plate on the basis of 1450 data points collected from analytical results. The effects of various material and geometrical parameters on the natural frequency of the sandwich plate are investigated in details. [ABSTRACT FROM AUTHOR]

In this paper, a new design of auxetic honeycomb is proposed for mechanical performance enhancement by combining the arc-shaped wall and the normal double-arrowed auxetic configuration. On basis of Mohr's 2nd theorem and Castigliano 2nd theorem, an analytical model considering strut bending and stretching is developed to modulate the in-plane mechanical properties of the proposed honeycomb with the geometric parameters. Further, an integrated experimental, simulation and theoretical approach is carried out to investigate its elastic properties and Poisson's ratios in a wide range. The comparison shows that the theoretical results are in good agreement with the experimental and simulation results, verifying the established analytical model. The results reveal that both the in-plane modulus and the Poisson's ratio of the proposed auxetic honeycomb are simultaneously improved compared to the typical double-arrowed and the re-entrant hexagonal designs, and show high and diverse dependencies on the geometric parameters. Additionally, the honeycomb features a stiffer modulus and stronger auxeticity along y direction than that along x direction when the arc angle of "bone", θ 1 , not exceeding a "turning point". The present design may provide an extensive reference for the design and application of mechanical meta-materials. [ABSTRACT FROM AUTHOR]

This work proposed an improved modification on the common re-entrant hexagonal honeycomb (RHH) by replacing the solid junction of the cell walls with a small hollow circle, and thus achieving a novel kind of honeycomb. A simple energy-based approach was adopted to develop theoretical models for predicting the in-plane equivalent elastic moduli of the new honeycomb. Finite element analysis was employed to verify the theoretical models and then the effects of the micro geometrical parameters on the in-plane elastic behaviors were further discussed. The results showed that the new honeycomb possesses an obvious negative Poisson's ratio effect, meanwhile, can achieve higher specific Young's modulus and shear modulus than the RHH. Moreover, the new honeycomb was found to exhibit a more tailored anisotropy than the RHH from the off-axial properties analysis. As a result, the new honeycomb may be an effective substitute for the RHH in application and the new layout can be a good guide for the improved design of auxetic honeycombs. [ABSTRACT FROM AUTHOR]