Search

Just as CryoSat-2, Sentinel-3 embarks on board a radar altimeter (SRAL) with the novel Synthetic Aperture Radar (SAR) mode that enables higher resolution and more accurate altimeter-derived parameters in the coastal zone, thanks to the reduced along-track footprint. Exploiting the SAR data in the recent years, many researchers have already proven that the performance of SAR altimetry with specific coastal retrackers is superior to collocated Pseudo-Low Resolution Mode (PLRM) coastal altimetry algorithms but they also pointed out that residual errors due to land contamination are still present in the very proximity of the land (0–3 km). The objective of this work is to further improve these results by exploiting extra information provided by SAR altimeters, namely the so-called Range Integrated Power (RIP), the new waveform built by a simple integration of the Doppler beams in the range direction. The RIP characterizes the backscattering state of the ground cell, towards which all the Doppler beams have been steered. These developments lead to a new retracker, here coined SAMOSA++, in which the RIP, as computed from the L1B-S data, is converted into a surface backscattering profile and directly integrated in the SAMOSA retracker as part of the model formulation itself. In this way, the modified SAMOSA model is automatically and autonomously able to cope with the different return waveform shapes from different surface types: either diffusive or specular. The mean square slope computed from the RIP is also estimated, representing a new output of the retracker. The performance of this new retracker is here cross-compared against its previous version, SAMOSA+, and against the standard Sentinel-3 marine PDGS (Payload Data Ground Segment) SAR retracker (SAMOSA2) in both coastal zone and open ocean in order to ensure a seamless transition between these zones. The new retracker SAMOSA++ is validated in the North East Atlantic region, where appropriate in situ validation data are available. The retrievals from the new retracker are cross-compared against the network of tide gauges and buoys in the German Bight and versus the output of the GCOAST Helmholtz-Zentrum Geesthacht (HZG) regional circulation and wave model. In addition, sea level estimates derived with different ocean tide and wet path delay geophysical correction models are compared. Results indicate that in this region the best geophysical correction models are the FES2014b tide model and the GPD+ wet tropospheric correction that incorporates data from the Sentinel-3 on-board radiometer. Analyses show that both SAMOSA+ and SAMOSA++ ensure the continuity of the PDGS SAR Marine retracker in the open ocean, leading to clear improvements in the coastal zone, larger for SAMOSA++ than for SAMOSA+. In summary, the new SAMOSA++ retracker retrieves more accurate altimetric parameters in the coastal zone, with a better consistency with respect to regional ocean models and in situ data.

As the first satellite altimetry mission operating in sar (delay-Doppler) mode, CryoSat-2 is an interesting mission to analyze its performance for water level monitoring over inland water bodies. It offers the opportunity to make comparison of sar and conventional altimeters by a multi-mode altimeter mounted on the same platform with a long repeat orbit. This comparison gives us more knowledge about the performance of the sar altimeter. Even tough it is not possible to perform it over same objects. In this paper we analyze the CryoSat-2 performance for water level monitoring via full- and sub-waveform retracking against in-situ gauge and L2 products of other satellite altimetry missions, e.g. Envisat and Jason-2. To this end, we retrack the full-waveforms and sub-waveforms with different empirical and physical retracking algorithms such as ocog , threshold, β -parameters and samosa 3. We evaluate its capability in all measurement modes, i.e. lrm , sar and sari n, over inland water bodies located in different climatic zones. We selected study areas with different shapes and sizes. Relative to in situ measurements we find a precision of the CryoSat-2 lrm mode of 15 cm rms over Qinghai lake (China) and 13 cm over Erie lake ( usa ). This is an improvement over Envisat, yielding precision of 17 cm in both cases. For the sar mode over Neagh lake (Northern Ireland) and Derg lake (Ireland) we obtain 15 cm and 13 cm where Envisat yields 28 cm and 100 cm , respectively. The sari n mode’s precision is assessed over Nasser lake (Egypt) with 25 cm rms and Athabasca lake (Canada) with 16 cm . Over these lakes Jason-2 achieved 54 cm and Envisat 19 cm , respectively. The most precise results of CryoSat-2 are obtained with our retracking and sub-waveform selection scenarios. Comparing CryoSat-2 results from our retracking scenarios using L1b data with those results obtained from L2 products (data) of this mission shows an improvement of 4–17 cm. The minimum and maximum improvements belong to Erie and Derg lakes respectively, the largest and smallest lakes. From the waveform analysis over lakes with different shapes and sizes, we found that the first and the mean-all sub-waveforms (mean correction from all sub-waveforms) retracked with the threshold and samosa 3 (only for sar mode) retrackers are appropriate to retrieve water level variation of small lakes and complex shaped lakes in this study. Over large lakes the full-waveform retracking leads to better results. In the case of icy-lake objects, sub-waveform retracking scenarios (the first and mean-all sub-waveforms) are more precise than the other scenarios. These are our findings over few samples, though more samples need to be analyzed to support them strongly.

We present results of contemporary coastal sea level changes along the coasts of Western Africa, obtained from a dedicated reprocessing of satellite altimetry data done in the context of the ESA ‘Climate Change Initiative’ sea level project. High sampling rate (20 Hz) sea level data from the Jason-1 and Jason-2 missions over a 14-year-long time span (July 2002 to June 2016) are considered. The data were first retracked using the ALES adaptative leading edge subwaveform retracker. The X-TRACK processing system developed to optimize the completeness and accuracy of the corrected sea level time series in coastal ocean areas was then applied. From the 14-year long sea level time series finally obtained, we estimate sea level trends along the Jason-1 & 2 tracks covering the study region. We analyze regional variations in sea level trends, with a focus on the changes observed between the open ocean to the coastal zone. Compared to the conventional 1 Hz sea level products dedicated to open ocean applications, the retracked 20 Hz measurements used in this study allow us to retrieve valid sea level information much closer to the coast (less than 3–4 km to the coast, depending on the satellite track location). The main objective of this study is twofold: (1) provide sea level products in the coastal areas from reprocessed altimetry data and (2) check whether sea level changes at the coast differ from that reported in the open ocean with conventional altimetry products. In the selected region, results show that over the study period, sea level trends observed near the coast of Western Africa are significantly different than offshore trends. In order to assess the robustness of the results, detailed analyses are performed at several locations to discriminate between possible drifts in the geophysical corrections and physical processes potentially able to explain the sea level changes observed close to the coast.

The Arctic Ocean is a challenging region for tidal modelling. The accuracy of the global tidal models decreases by several centimeters in the Polar Regions, which has a large impact on the quality of the satellite altimeter sea surface heights and the altimetry-derived products. NOVELTIS, DTU Space and LEGOS have developed Arctide2017, a regional, high-resolution tidal atlas in the Arctic Ocean, in the framework of an extension of the CryoSat Plus for Ocean (CP4O) ESA STSE (Support to Science Element) project. In particular, this atlas benefits from the assimilation of the most complete satellite altimetry dataset ever used in this region, including Envisat data up to 82°N and CryoSat-2 data between 82°N and 88°N. The combination of these satellite altimetry missions gives the best possible coverage of altimetry-derived tidal constituents. The available tide gauge data were also used for data assimilation and validation. This paper presents the implementation methodology and the performance of this new regional tidal model in the Arctic Ocean, compared to the existing global and regional tidal models.

Significant wave height (SWH) and surface wind speed (WS) products from the CryoSat-2 Delay-Doppler, which is commonly known as Synthetic Aperture Radar (SAR), Mode are validated against operational ECMWF atmospheric and wave model results in addition to available observations from buoys, platforms and Jason-2 altimeter. The CryoSat-2 SAR Mode data are processed from Level 1A (also known as Full Bit Rate, FBR, in the CryoSat-2 terminology) up to L1B in accordance to the Delay-Doppler algorithm, and then retracked using SAMOSA (SAR Altimetry MOde Studies and Applications) SAR return waveform model, as implemented in the Grid Processing on Demand (G-POD) service called SAR Versatile Altimetric Toolkit for Ocean Research and Exploitation (SARvatore). The data cover two geographic boxes: one in the northeast Atlantic Ocean (NE Atlantic Box) for the period from 6 September 2010 to 30 June 2014 and the other is in the eastern Pacific (Pacific Box) for the period from 7 May 2012 to 30 June 2014. The amount of data is limited by the CryoSat-2 SAR Mode acquisition mask over ocean but is large enough to ensure robustness and significance of the results. The results show that the quality of both CryoSat-2 SAR SWH and WS products is very high when compared to typical altimetry mission requirements. When compared against model and in-situ data, the correlation coefficients are as high as 0.98 for SWH and 0.95 for WS while the bias and standard deviation of the difference is less than 5% and 0.3 m, respectively, for SWH and less than 0.3 m/s and 1.3 m/s, respectively for WS. The results show that the quality of both CryoSat-2 SAR SWH and WS products is in line with Jason-2 performances and satisfies the typical altimetry mission requirements.

This study uniquely processes Cryosat-2 Full Bit Rate (FBR) SAR Level 1A data to recover inland water heights. The processing methodology involves an azimuthal Fast Fourier Transform (FFT) for the burst echo data followed by beam formation directed towards equi-angular ground points, stacking, slant range correction, multi-looking and finally retracking. It is seen that speckle in the burst echo data affects the recovered heights with precise heights recovered only through stacking and forming multi-look waveforms. Also investigated is the effect of different numbers of multi-looks in the stack to form the final waveform for retracking. A number of empirical retrackers are utilized over inland waters and compared against the oceanic SAMOSA2 and the OCOG/Threshold retrackers. Use of the SAMOSA2 retracker is shown to be inappropriate for inland waters. The use of 81 multi-looks from the stack centred on the nadir direction is shown to be preferred across Tonle Sap with the RMS of height residuals in the range 4–6 cm. External validation across Tonle Sap using gauge data shows that CryoSat-2 heights (RMS 42.1 cm) are comparable to OSTM (RMS 42.6 cm) despite the CryoSat-2 non-repeating orbit which precludes the use of a mean profile. Validation against gauge data at Kratie on the Mekong gives an RMS of 59.9 cm for Cryosat-2 against an RMS of 35.5 cm and 52.2 cm derived from Envisat. The CryoSat-2 results utilize an approximate correction for river slope as the river crossings span 5 km upstream to 80 km downstream of the gauge while the repeat pass crossings of Envisat are at 7 km and 43 km from the gauge. Validation of Amazon altimetric Surface Water Elevation (SWE) showed RMS agreement of 27.3 cm with Obidos gauge data and 56.3 cm at Manacapuru 650 km upstream of Obidos. Overall validations showed that CryoSat-2 altimetric river heights are more accurate than those from TOPEX/Poseidon, OSTM and Envisat for relatively large water bodies but less accurate than the Ka band SARAL (Satellite with ARgos and ALtiKa).

A regional cross-calibration between the first Delay-Doppler altimetry dataset from Cryosat-2 and a retracked Envisat dataset is here presented, in order to test the benefits of the Delay-Doppler processing and to expand the Envisat time series in the coastal ocean. The Indonesian Seas are chosen for the calibration, since the availability of altimetry data in this region is particularly beneficial due to the lack of in-situ measurements and its importance for global ocean circulation. The Envisat data in the region are retracked with the Adaptive Leading Edge Subwaveform (ALES) Retracker, which has been previously validated and applied successfully to coastal sea level research.The study demonstrates that CryoSat-2 is able to decrease the 1-Hz noise of sea level estimations by 0.3 cm within 50 km of the coast, when compared to the ALES-reprocessed Envisat dataset. It also shows that Envisat can be confidently used for detailed oceanographic research after the orbit change of October 2010. Cross-calibration at the crossover points indicates that in the region of study a sea state bias correction equal to 5% of the significant wave height is an acceptable approximation for Delay-Doppler altimetry.The analysis of the joint sea level time series reveals the geographic extent of the semiannual signal caused by Kelvin waves during the monsoon transitions, the larger amplitudes of the annual signal due to the Java Coastal Current and the impact of the strong La Niña event of 2010 on rising sea level trends.