Search

The analysis was performed on six commonly used 5.56 x 45 mm projectile types (M193, M855, M855A1, L31A1, M995, and AP45). The projectile's impact velocity (chosen as 900 m/s) was the same in the examination process. This made it possible to assess how the projectile's design has affected its performance against a hard steel target. These evaluations included numerical simulations (Ansys Autodyn) of projectile impacts. Using the available experimental data, the materials in the computational model were first validated. A short description and CAD model of projectiles is also given. Relevant conclusions were reported. [ABSTRACT FROM AUTHOR]

The paper deals with an adaptation of the standard interior ballistics model for the case of amphibious rifle shooting ammunition under water. The adapted mathematical model was validated and experimentally verified using the 5.56 mm underwater projectile shot from the 5.56 mm amphibious rifle. The dependence of the underwater interior ballistic processes on the powder mass was investigated. The results of theoretical mathematic model solution correspond very well with experiment. The described mathematical model and the dependence of the underwater interior ballistic processes on the powder mass can be a reference for designers in the design process of the underwater ammunition or underwater rifle. [ABSTRACT FROM AUTHOR]

The article is focused on the development of the underwater ballistic model of a supercavitating projectile fired from an underwater firearm. The supercavitating flows and their influences on the ballistic characteristics of the projectile are studied. The presented mathematical model is validated and experimentally verified for the supercavitating projectile of 5.7 mm in diameter fired from a smooth bore underwater rifle. [ABSTRACT FROM AUTHOR]

The ignition performances of percussion primers for small calibre ammunition are determined using a new experimental setup, with pressure transducers and special designed combustion chambers. The method enables a comparison of new designed primers with consecrated models by relative ignition capacity. Results show that ballistic performances of primers are in direct relationship with the gradient pressure vs. rise time and also with the maximum pressure developed inside the cartridge chamber. [ABSTRACT FROM AUTHOR]

This article deals with an analysis of the resistance against projectile penetration and bending of ballistic protection vest made of a ballistic textile. A mechanical model of the core of ballistic protection vest is designed, theoretically solved, and experimentally verified. The stiffness characteristics of the ballistic protection vest core were obtained from the technical test utilising a free fall weight. These characteristics allow a prediction of a chosen small calibre projectile movement in the same material during a firing experiment. The shape deformation of ballistic protection vest core layers is analytically expressed by their bending in the direction of the projectile movement. [ABSTRACT FROM AUTHOR]

The article describes the method of determination of limit velocity for the aluminium alloy sheet metal from the airplane fuselage skin hit by a pistol projectile of calibre 9 mm with utilisation of 2D FEM model of interaction between the projectile and the sheet metal. The simulations are based on accomplished firing experiments and results are compared. The results of simulation can be utilised for prediction of level of damage of aircraft fuselage in case of firing on board of the plane. [ABSTRACT FROM AUTHOR]