Search

A feasibility study was conducted to develop a novel method to determine the temporal changes of tensile forces in bridge suspender cables using time-frequency analysis of ambient vibration measurements. An analytical model of the suspender cables was developed to evaluate the power spectral density (PSD) function of a cable with consideration of cable flexural stiffness. Discrete-time, short-time Fourier transform (STFT) was utilized to analyze the recorded acceleration histories in both time and frequency domains. A mathematical convolution of the analytical PSD function and time-frequency data was completed to evaluate changes in cable tension force over time. The method was implemented using acceleration measurements collected from an in-service steel arch bridge with a suspended deck to calculate the temporal variation in cable forces from the vibration measurements. The observations served as proof of concept that the proposed method may be used for cable fatigue life calculations and bridge weigh-in-motion studies.

This paper describes the application of a probabilistic structural health monitoring (SHM) method to detect global damage in a highway bridge in Connecticut. The proposed method accounts for the variability associated with environmental and operational conditions. The bridge is a curved three-span steel dual-box girder bridge located in Hartford, Connecticut. The bridge, monitored since Fall 2001, experienced a period of settling in the Winter of 2002-2003. While this change was not associated with structural damage, it was observed in a permanent rotation of the bridge superstructure. Three damage measures are identified in this study: the value of fundamental natural frequency determined from peak picking of autospectral density functions of the bridge acceleration measurements; the magnitude of the peak acceleration measured during a truck crossing; the magnitude of the tilt measured at 10-minute intervals. These damage measures, including thermal effects, are shown to be random variables and associated P values are calculated to determine if the current probability distributions are the same as the distributions of the baseline bridge data from 2001. Historical data measured during the settling of the bridge is used to verify the performance of the bridge, and the field implementation of the proposed method is described.