Search

Abstract The launching of 5G technology provides excellent opportunity for the prosperous development of Internet of Things (IoT) devices and intelligent wireless sensor nodes. However, deploying of tremendous wireless sensor nodes network presents a great challenge to sustainable power supply and self‐powered active sensing. Triboelectric nanogenerator (TENG) has shown great capability for powering wireless sensors and work as self‐powered sensors since its discovery in 2012. Nevertheless, its inherent property of large internal impedance and pulsed “high‐voltage and low‐current” output characteristic seriously limit its direct application as stable power supply. Herein, a generic triboelectric sensor module (TSM) is developed toward managing the high output of TENG into signals that can be directly utilized by commercial electronics. Finally, an IoT‐based smart switching system is realized by integrating the TSM with a typical vertical contact–separation mode TENG and microcontroller, which is able to monitor the real‐time appliance status and location information. Such design of a universal energy solution for triboelectric sensors is applicable for managing and normalizing the wide output range generated from various working modes of TENGs and suitable for facile integration with IoT platform, representing a significant step toward scaling up TENG applications in future smart sensing.

Abstract The crystal distortion such as lattice strain and defect located at the surfaces and grain boundaries induced by soft perovskite lattice highly determines the charge extraction‐transfer dynamics and recombination to cause an inferior efficiency of perovskite solar cells (PSCs). Herein, the authors propose a strategy to significantly reduce the superficial lattice tensile strain by means of incorporating an inorganic 2D Cl‐terminated Ti3C2 (Ti3C2Clx) MXene into the bulk and surface of CsPbBr3 film. Arising from the strong interaction between Cl atoms in Ti3C2Clx and the under‐coordinated Pb2+ in CsPbBr3 lattice, the expanded perovskite lattice is compressed and confined to act as a lattice “tape”, in which the PbCl bond plays a role of “glue” and the 2D Ti3C2 immobilizes the lattice. Finally, the defective surface is healed and a champion efficiency as high as 11.08% with an ultrahigh open‐circuit voltage up to 1.702 V is achieved on the best all‐inorganic CsPbBr3 PSC, which is so far the highest efficiency record for this kind of PSCs. Furthermore, the unencapsulated device demonstrates nearly unchanged performance under 80% relative humidity over 100 days and 85 °C over 30 days.