Search

This paper presents a motion sensor-based haptic master controller capable of static and dynamic force presentation by the newly invented Finger Band Soft Actuator (FBSA). The master controller operates a surgical assist robot using the $ 6 $ 6 degrees of freedom position and posture data tracked by an optical motion capture. The haptic force presentation can be realized by the pneumatic pressure of FBSA, which can be highly integrated into the controller mechanism to maintain precise manipulability. The FBSA can present a pressing force of 3.7 N for a small-sized finger and 5.1 N for a large-sized finger at an internal pressure of 60 kPa, and there is a monotonically increasing and decreasing relationship between the air pressure and the pressing force. The effectiveness of haptic force presentation by the FBSA was experimentally evaluated in the master-follower operation of a surgical assist robot. Ten subjects performed the task of pulling a suture thread and controlled the manipulation to achieve the directed tension. The experimental result shows that with the four levels of force presentation scheme by the FBSA, the error between suture tension and target operating force is significantly smaller than without force presentation. [ABSTRACT FROM AUTHOR]

Pneumatic artificial muscles have some advantages. Especially, the flexibility of artificial muscles contributes to compose novel mechanisms. Authors succeeded in manufacturing novel soft mechanisms that are composed of only woven artificial muscles and strings. We called this mechanism active textile. The structure is uniformed with woven artificial muscles; nevertheless, the forms and movements of mechanisms are diverse. We aim to establish a design method for these active textiles. We reported that deformations of active textiles are changed by woven structures. In addition to that, wefts' characteristics such as cross-sectional shape, bending stiffness and elasticity determine the characteristic of a textile. Deformations of active textiles are caused by the contraction and the expansion of thin McKibben muscles. In this paper, authors focus on the contraction and curvature deformation of the active textile due to the drive of the artificial muscles.We fabricated active textiles with different wefts and different weave structures.Contraction and bending deformations of active textiles in the warp and weft directions are assumed geometrically. In addition, we verified the validity by experiments. [ABSTRACT FROM AUTHOR]

Actuators with clutch mechanisms have advantages in safety, backdriveability, and controllability for human-coexistence robots. This paper presents a large force actuator using electro-adhesive gels, which are functional materials controlled by the magnitude of an electric field. The developed actuator can generate and continuously control a force over 560 N and resist with a small force when de-energized. The number of electro-adhesive gel disks is drastically increased to increase the generative force. This paper reports the structural plan for the new actuator and experiments to investigate its basic characteristics. Based on the experimental results, an actuator model is identified for the future design of its control system. This paper contributes to the development of a clutch-type linear actuator with a large generative force, maintaining safety and a high force-to-weight ratio. It also addresses the problem of high-voltage power supply costs for electro-rheological and electro-adhesive materials. [ABSTRACT FROM AUTHOR]

Many soft actuators have been studied for use in robots that come into contact with humans, including communication, entertainment, and medical/health care robots. One reason for this is that soft robots are expected to exhibit intrinsic safety in case an accident occurs. This paper proposes a plastic-film pneumatic actuator with a pleated structure that do not undergo the elastic deformation typical of rubber materials. By utilizing thin plastic films, the mass of an actuator can be significantly reduced, even if the actuators are the same size as a human arm. If the mass of the actuator is reduced, the kinetic energy when contacts with humans mechanically can be reduced considerably without reducing the working speed. More specifically, we propose a pleated structure made of plastic to achieve structural deformation generated from a two-dimensional pleated film. The pleated structure easily generates various bending motions. In this paper, a design method for determining the shape parameters of the pleated actuator structure using approximate models with considering measurement results of generating force is presented. We evaluated the adequacy of our approach in experiments using sample actuators. Furthermore, we show the constraints required to determine the necessary parameters. Thus, this paper provides an easy method for designing a lightweight and flexible plastic-film actuator. [ABSTRACT FROM AUTHOR]

An electro-conjugate fluid (ECF) is a kind of functional fluid, which produces a jet flow (ECF jet) when subjected to high DC voltage. It is known that a strong ECF jet is generated under a non-uniform electric field (e.g., a field with a pair of needle and ring electrodes (a needle–ring electrode pair)). This study introduces the ECF jet to develop a novel flexible robot finger. First, we propose a concept for a novel robot finger. The robot finger mainly consists of a bending actuator, an ECF tank and ECF jet generators, which could be a micro fluid pressure source of the robot finger. Second, we characterize each component of the robot finger (i.e., the bending actuator and the ECF jet generator). We investigate the influences of electrode parameters on ECF jet generator performance in order to design the finger prototype. Finally we clarify the characteristics of the robot finger. The length, the diameter and the mass of the robot finger are 34.2 mm, 12 mm and 3.8 g, respectively. The robot finger can generate a force of 0.28 N and bend approximately 70°. [ABSTRACT FROM PUBLISHER]

Soft actuators driven by pneumatic pressure are promising actuators for mechanical systems in medical, biological, agriculture, welfare fields and so on, because they can ensure high safety for fragile objects from their low mechanical impedance. In this study, a new rubber pneumatic actuator made from silicone rubber was developed. Composed of one chamber and one air-supply tube, it can generate curling motion in two directions by using positive and negative pneumatic pressure. The rubber actuator, for generating bidirectional motion, was designed to achieve an efficient shape by nonlinear finite element method analysis, and was fabricated by a molding and rubber bonding process using excimer light. The fabricated actuator was able to generate curling motion in two directions successfully. The displacement and force characteristics of the actuator were measured by using a motion capture system and a load cell. As an example application of the actuator, a robotic soft hand with three actuators was constructed and its effectiveness was confirmed by experiments. [ABSTRACT FROM AUTHOR]

In recent years, Japanese society has been aging, creating a shortage of young workers. Robots are expected to be useful to perform tasks such as rehabilitation therapy, nursing elderly people and day-to-day work support for elderly people. In particular, robots that are designed for use in the fields of medical care and welfare must be safe for the human environment because they often come into contact with humans. Furthermore, robots must have dexterity that is similar to that of humans. Under these circumstances, tendon-driven systems of two types using flexible silicone rubber materials have been developed. They are lightweight and have characteristics resembling those of human muscle. This paper describes the basic features and mechanisms of two tendon-driven systems that we have developed as a soft actuator. Furthermore, basic properties of the system are evaluated and compared with those of human muscles. [ABSTRACT FROM AUTHOR]

An electro-conjugate fluid (ECF) is a type of dielectric and functional fluid that generates a powerful jet flow when subjected to high DC voltage. Although a high voltage is needed to generate the jet flow, the current is quite low at several microamperes, resulting in a total power consumption of several milliwatts. Using this smart fluid, we can develop micro fluid-driven mechanical components without any bulky pumps. Also, it is clarified that the power density of the ECF jet is higher when the electrode pair is miniaturized; therefore, it is suitable for micro actuators. Here, we propose and fabricate three types of soft actuators with an antagonistic configuration: (i) micro artificial muscle cells, (ii) a McKibben-type micro artificial muscle actuator using the ECF effect and (iii) a micro finger actuator with two chambers to bend. The actuators basically consist of a silicone rubber tube covered with a fiber sleeve and a micro pressure source using the ECF effect. Next, we apply and integrate these actuators into a micro robot hand, driven with ECF jets. The driving characteristics of the micro artificial muscle actuator and the integrated micro ECF hand with ECF fingers were fabricated and experimentally investigated. The experimental results show that this ECF jet actuation is effective for driving soft micro hands. [ABSTRACT FROM AUTHOR]

Robots manipulated by humans are being aggressively researched and developed. Such robots have requirements such as a large generative force, high-speed response, good controllability, high safety, low friction and backdriveability. We focused on backdriveability and created a prototype for a novel linear actuator with a new structure that includes an electrorheological (ER) gel, which is a recently designed functional material. The device is an all-purpose actuator that satisfies the demands for application in a human-coexistence welfare robot, such as power-assist systems. This paper presents the original plan for the linear actuator, shows the actuator as currently manufactured and presents the basic characteristics of the actuator as investigated experimentally. We obtained larger force from the linear actuator than the initial target. Additionally, the linear actuator shows possibilities of further improvement of the force-weight ratio by an increase of the ER gel structures. With regard to stabilizing the response of the linear actuator, spring elements contributed to its improvement. However, further stabilization remains as a future issue for practical use in human-coexistence robots. [ABSTRACT FROM AUTHOR]

A bucky gel actuator is a novel electro-active polymer (EAP), which is a low-voltage-driven dry soft actuator. In addition, the bucky gel device generates electromotive force when bending and then it can also be used as a sensor. Its device has a bimorph structure with polymer-supported bucky gel electrodes and a polymer-supported ionic gel electrolyte. It can be fabricated by layer-by-layer casting to easily form any shape. In this paper, we demonstrate an automatic fabrication method of bucky gel devices based on a printing method. By using a dispensing machine, we construct the printing system and the manual forming process is replaced with automatic printing. We investigate the printing of complicated shapes and three-dimensional electrode patterns through experiments. [ABSTRACT FROM AUTHOR]

We are studying the robotic application of ionic polymer–metal composite (IPMC). The characteristics of IPMC greatly depend on the type of counterions, and it is considered that the performance of the actuators can be improved by combining the actuators with several types of counterions and applying an integrated control. IPMC also has a sensor function, as the IPMC film generates an electromotive force when it is deformed. It has the possibility to be integrated into an IPMC actuator with soft actuation. In this paper, we consider an integrated design of an IPMC actuator/sensor, and investigate control of the combined IPMC actuators using H∞ control and the construction of an IPMC sensor system. [ABSTRACT FROM AUTHOR]

We are developing an artificial muscle linear actuator using ionic polymer-metal composites (IPMC)—electro-active polymers that bend in response to electric stimuli—and the goal of our study is applying the actuator to robotic applications, especially to a biped walking robot. In this paper, we will describe the structure of the actuator and an empirical model of the actuator which has two inputs and one output, and whose parameters are identified from input-output data. Based on the empirical model, basic experiments and position control of the linear actuator are demonstrated. Then, we consider walking control of a small-sized biped walking robot. In the application we assume that the developed actuators are connected both in series and in parallel to a joint of the walking robot so that the actuators supply enough torque to the robot, and that they are stretched and compressed enough. It is shown throughout simulations that the biped walking robot with the actuators can walk on level ground with a period synchronized with the period of the input signal. [ABSTRACT FROM AUTHOR]