Search

Your search keyword '"Zhu, Xiang"' showing total 45 results
Start Over "Zhu, Xiang" Journal advanced materials research
45 results on '"Zhu, Xiang"'

42. One Method for Estimating Normal Contact Stiffness with Ra and Adhesion Rate

Author

Wang, Peng, Li, Tian Yun, Zhu, Xiang, and Pan, Guo Xiong

Abstract

Based on the fractal contact theory, the model about the relation between normal contact stiffness and material properties as well as fractal parameters is established. Then by making use of the relation between fractal parameters and surface roughness, a new method for estimating the normal contact stiffness is put forward. The numerical results indicate that the contact stiffness increases as surface roughness decreases or adhesion rate increases. When the adhesion rate is constant, contact stiffness changes a little while Ra≥6.3μm, but the change is relatively bigger when Ra≤6.3μm. Considering both the cost of surface machining and the influence of contact stiffness on the whole system, the surface roughness is suggested to be Ra=6.3μm. The results provide theoretical supports for vibration isolation analysis with gaskets and the process of low-noise construction.

Published
2013
Full Text
View/download PDF

43. Calculation Model of Mass Action Concentration for CaO-B2O3-SiO2 Slag System

Author

Wang, Hong Ming, Zhu, Xiang, and Li, Gui Rong

Abstract

According to the coexistence theory of melted slag structure, a calculation model of mass action concentrations for CaO-B2O3-SiO2 slag system has been established, by which the mass action concentrations of all structure units in CaO-B2O3-SiO2 systems are calculated. The results indicate that the activities of CaO and 2CaO•SiO2 can be decreased effectively by B2O3. Furthermore, when the slag basicity is higher than 2.0, the activity of 2CaO•SiO2 increases firstly and then decreases with the increasing of B2O3 content. The activity of CaO increases with the increasing of slag basicity. When the basicity is less than 2.2, the activity of 2CaO•SiO2 increases with the increase of slag basicity. Moreover, when the basicity is 2.2, the activity of 2CaO•SiO2 reaches the maximum value. In another word, the activity of 2CaO•SiO2 decreases with the increase of slag basicity on the condition that the slag basicity exceeds 2.2. B2O3 exists in the slag in the form of CaO•B2O3, 2CaO•B2O3 and 3CaO•B2O3.

Published
2013
Full Text
View/download PDF

44. Calculation Model of Activity for Slag System of CaO-SiO2-Fe2O3

Author

Zhu, Xiang, Wang, Hong Ming, Li, Gui Rong, and Zhao, Yu Tao

Abstract

Based on the coexistence theory of slag structure, the activity model of CaO-SiO2-Fe2O3 ternary slag system was established. The effects of Fe2O3 content and basicity on the activities of CaO and 2CaO•SiO2 were investigated. The structure units of Fe2O3 in the molten slag were discussed. The results indicate the slag basicity has a significant influence on the activities of CaO and 2CaO•SiO2. The activity of CaO increases with increasing slag basicity, while the activity of 2CaO•SiO2 increases with the increasing of slag basicity when the basicity is less than 1.8, which reaches the maximum value when the basicity is 1.8. In another word, when the slag basicity exceeds 1.8, the activity of 2CaO•SiO2 decreases with the increasing of slag basicity. In addition, the activities of CaO and 2CaO•SiO2 can be decreased by Fe2O3. Moreover, when the slag basicity is higher than 2.0, the activity of 2CaO•SiO2 increases slightly with the increasing of Fe2O3 content. The main structure units of Fe2O3 in molten slag are closely related to the slag basicity.

Published
2012
Full Text
View/download PDF

45. Structural, Magnetic and Microwave Absorbing Properties of Nanosized NiXZn1-xFe2O4 Powders Synthesized by Sol-Gel Technique

Author

Zhu, Xiang Rong, Lu, Lin Feng, and Shen, Hong Lie

Abstract

NixZn1-xFe2O4 (x=0.4, 0.6) powders are synthesized by sol-gel technique. The X-ray diffraction (XRD) measurements show their polycrystalline spinel structural characteristics. Both XRD and Atomic Force Microscopy demonstrate the samples are nanosized. At room temperature typical soft magnetism is exhibited by the samples. The reflection attenuation resulting from microwave absorption would reach to 1.9 dBm over the frequency range 6 GHz - 10 GHz when the samples are paved on a 10 cm  10 cm square aluminum plate with a thickness of about 0.35 mm.

Published
2010
Full Text
View/download PDF

Catalog

Books, media, physical & digital resources
See catalog results