Search

In the analysis of semiconductor position sensitive detector (PSD) based on the traditional structure, using dual ion implantation method to studying the new type of PSD structure. The new structure of the n-type silicon substrate by implanting a high dose, low energy boron ions and another high energy boron ion, Which subsequent annealing of 2h at 1050 °C in an ambient of dry O2to form a shallow and a low doped p-n junction. Experimental results show that the new structure of PSD can obtained high position resolution, smaller errors and nonlinear response time.

[Objective] to study the modeling technique of Vitamin C dripping pill and its quality evaluation. [Method] the preparation conditions were optimized by orthogonal experiments using encapsulation efficiency (EE) as the target index. The matrix type (PEG 4000:PEG 6000), ratio of drug to matrix, dripping temperature and dripping distance with three levels were chosen in the orthogonal experiments. Weight variation, dispersion limit, content and stability of the dripping pill under the optimum conditions were estimated. [Results] The optimum conditions were obtained when matrix type (PEG 4000: PEG 6000), ratio of drug to matrix, dripping temperature and dripping distance were 6:1, 1:7, 80 °C and 20 cm respectively. The weight variation and dispersion limit of the dripping pill ranged in -13.47-13.38% and 4.5-5.0min. An assay method was developed by UV spectrophotometry. Its quality was stable during the three months of accelerated test. [Conclusion] the weight variation and dispersion limit of the dripping pill with good morphology and high stability came up to the requirements of Ch. P, the assay method was simple and accurate, demonstrating that the dripping pill can be used as edible or pharmaceutical dosage form.

Nowadays, the users’ evaluation of sound environment in the railway stations is focused by all kinds of experts. Comparing with other spaces, the waiting hall is usually recognized as the most important space in the railway station. In this study, more than 600 questionnaire survey has been undertaken at 4 waiting halls of railway stations in capital cities of China, to determine how the sound sources and sound pressure level influence acoustic evaluation. More details of acoustic evaluation in the waiting hall of Harbin railway station are given in this paper. Based on the analysis of the investigation results, it has been found that in the waiting halls of railway stations, PA system is generally noticeable and ‘masking’ other less preferred sound sources, while sound from mobiles is preferred by passengers. The relationship between the measured LAeq and the subjective loudness, acoustic comfort evaluation as well as subjective loudness and acoustic comfort are all of a linear shape, and the acoustic comfort is general better when LAeq is lower than 75dBA.

In this paper, strong Moire-fringe density and direction are studied in noisy phase maps using a preprocessing method of automatic Moire–fringe analysis. This information can be used to improve the performance of 2-D phase unwrapping methods, to construct phase-jump-preserving filtering strategies, and also to perform robust segmentation of phase data. The method is highly insensitive to noise, is model based and perforros the studies in the Fourier domain.

A novel flowrate sensor based on a couple of fiber Bragg gratings( FBGs) has been proposed, consisting of fiber grating pressure sensing setup and Venturi tube. The expression of relationship between the flowrate and the wavelength shift difference of the FBGs is derived. The pressure that two sides of the cross section of the aluminum foil tube in the pressure sensing setup results in the distortion of an isosceles triangle cantilever structure. The distortion results in the wavelength shift of a couple of FBGs that are mounted at either side of the cantilever. By monitoring the wavelength shift difference of the two FBGs, the flowrate can be obtained. The cross-sensitive problem of the FBGs sensor can be solved by compensating the temperature effect. The preliminary experiments have been carried out, and the results verify the feasibility of the proposed sensor with a measurement range from 8 to 200 mm/s.

PC1D software, which was developed by the University of New South Wales, has been used to simulate photovoltaic properties of crystalline semiconductor devices. The paper focuses on the simulation of silicon solar cell by PC1D. The simulation of silicon solar cell is carried out by setting up key parameters, which include device area, thickness, band gap, etc. Several important characteristics of silicon solar cells are obtained by simulation.

This paper, innovative approaches are based on laser scanning and image analysis, presents an efficient composite technique for object profile extraction with real-time image processing. High throughput is obtained by algorithmic prefiltering to restrict the image area, while high accuracy is achieved by neural recontruction of the profile.

Paper has been removed due to double publication.