Search

This article describes four kinds of oxidation technology in organic wastewater treatment methods and techniques applied in treatment of organic wastewater by scope and advantages and disadvantages. Key word organic wastewater oxidation technology treatment methods

The short-circuit electromagnetic force in radial direction induces critical mechanical stress on a power transformer. In this paper, the radial short-circuit forces which are exerted on transformer low voltage (LV) windings are investigated. Firstly, the mechanisms of leakage flux and short-circuit electromechanical forces in transformer coils are analyzed. Afterwards, based on IEC standards followed by short-circuit tests, calculations of radial short-circuit forces and evaluations of the ability to withstand short currents in LV windings are developed. The case studies and comparisons with improved measures show that the evaluation and calculation method is feasible and effective, and this method also offers three useful ways to strengthen the ability to withstand short-circuit currents for transformer windings.

The mixed valency character and antiferromagnetic coupling in Molecule magnets Materials NBu4FeIInMnII1-n[FeIII(OX)3]（n=0.03、0.10、0.15、0.97） were investigated by magnetic measurements.The values of M increase and exhibit weak irreversibility in the field-cooled (FC) magnetization curves. There are a clear bifurcation phenomenon of the field-cooled (MFC) and Zero-field-cooled (MZFC) magnetization curves.In the Molecule magnets Materials NBu4FeII0.10 MnII0.90[FeIII(OX)3],the Ne´el temperature is 34 K.And the Ne´el temperature of NBu4FeII0.15MnII0.85 [FeIII(OX)3] is 28 K.In the sample NBu4FeII0.03 MnII0.97[FeIII(OX)3],,the bifurcation of the ZFC and FC plots below the Ne´el temperature of 30 K indicates irreversibility.The oxalate group has been shown to be an excellent bridging ligand in supporting the magnetic exchange interaction.

For the purpose of improving the reproducibility and the semiconductor properties of chalcopyrite CuInS2 thin film, potassium hydrogen phthalate (C8H5KO4), as a complex agent, was added into the sulphate bath system. The optimum process parameter for the preparation of CuInS2 thin film was determined by orthogonal experiment method. The effect of C8H5KO4 on the composition and Mott–Schottky behavior of the as-deposited film was studied with electron dispersion spectroscopy (EDS) and alternating current (AC) measurement. It was found that the as-deposited film was p-type semiconductor with the flatband of 0.665 V and the acceptor density of 3.06×1019 cm-3; the addition of C8H5KO4 can effectively enhance the composition stability of the film and decrease its flatband potential and acceptor density.

The electrochemical performance of capacitor was studied with LiCoO2/AC as composite cathode and activated carbon (AC) as anode, in 1.0 mol/L LiPF6/EC+DMC electrolyte. Cyclic Voltammetary, Constant-Current Charge and Discharge, Electrochemical Impedance Spectrum (EIS) and Leakage Current Test were tested to study the characteristics of supercapacitors. The results illustrate that recharging voltage of hybrid supercapacitor can reach to 3.0 V and show good capacitance characteristics. The supercapacitor can rapidly charge and discharge and show good cycling performance. There is a great effect to the performance of the capacitors by adopting different proportional composite electrode. When the ratio of composite electrode is 6:4, we get maximum symmetrical Cyclic Voltammetary and short charge-discharge time only 26.4min; When the ratio is 7:3, the minimum AC impedance of 26.2W can be attained and least leakage current is only 19.92mA/g; When the ratio is 5:5, the best first specific capacity can reach to 70.17F/g but a lower capacity retention rate is 74.86%.

The electrochemical behavior of copper in various concentrations of NaHSO3 solution was investigated with linear polarization and cyclic voltametry technique at room temperature. The results showed that the concentration of bisulfite ions has noticeable effects on the behavior of copper. With HSO3 -concentration increasing, the passivity region, ascribed to the formation of absorption layer Cu (HSO3) ads - or Cu (SO4) ads 2-, appearing at the lower potential range in the polarization curve inclined to transform into an active region; whereas another passivity region, due to the appearance of CuO or Cu2O layer on the surface, took place at a higher potential region. The formation and the reduction of CuO or Cu2O were irreversible.

CuInS2 thin film used for photovoltaic applications was prepared by one-step electrodeposition. The films were annealed at different temperatures of 350, 400, 500 °C. Effects of annealing temperatures on the properties of the film were investigated by the way of X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV-Vis-NIR Spectroscopy. The result shows that CuInS2 film with chalcopyrite structure can be successfully prepared by one-step electrodeposition. Annealing is effective in improving the crystallinity of the thin film. The temperature of 400°C is favorable to the grain growth of the film without the generation of impurity.