Search

High-efficiency and precision machining of complicated components can be realized by using metal-bonded CBN grinding wheel. However, the difficulty in dressing those superabrasive grinding wheels is one of the main obstructions to popularize its application in industry. Different from the traditional methods, the aim of the paper is to investigate the electro-discharge dressing of bronze-bonded CBN formed grinding wheel. Based on the analysis of electrical discharge parameters and grinding performance, the results show that electro-discharge dressing of CBN formed grinding wheel is feasible. With the increase of pulse duration, pulse voltage and pulse current, the dressing efficiency is increasing, more abrasive grains are protruding, but surface topography of grinding wheel is worsen. Therefore, grinding tests show that, in order to get the dressing quality better and keep the dressing efficiency higher, the bigger electrical discharge parameters are chosen for rough dressing process and the smaller ones are chosen for finishing process.

Copper-tungsten alloy which is widely used in the field of EDM has high melting temperature and excellent electrical and thermal conductivity. Copper tungsten electrodes for electrical discharge dressing of metal-bond wheel were studied, and experiments were conducted to observe their wear performance in this paper. Orthogonal experiment was designed to explore the wear at the edge of and the bottom of electrode with the machining of holes. Thickness of the carbon layer, micro topography and experimental results were analyzed. Low current and big pulse duration can reduce the electrode wear rate. Although carbon on the electrode surface can be wiped out easily, wear rate of copper-tungsten electrode decreases with the increasing in thickness of the carbon at the initial phase. There are fewer cracks and residue presented on the machined surface by microscope.

YL10.2 and YF06 are ultrafine-grained cemented carbides, and grinding experiments were carried out with resin-bonded diamond grinding wheel. Based on measured grinding force, surface roughness and SEM topography, experimental results were analyzed; grinding forces and depth of grinding approach linear correlation; and the grinding force of YF06 is greater than that of YL10.2 in rough grinding, but the grinding force increases significantly if depth of cut is greater than a certain value in finish grinding. The trend of machined surface roughness looks like “V” type with the increasing of depth of cut; the material removal behavior of ultrafine-grained cemented carbides in grinding was observed; the ploughing and fragmentation exist simultaneously on the ground surface, and the dominated material removal behavior depends on the grinding parameters or chemical composition of workpiece.

Optical glass is widely used as the most important material in optical field in recent years. Glass molding press (GMP) has been employed as a promising technique to manufacture optical components in mass production. Heating time and annealing time are the key factors which influence the production cycle. In this paper, an effective method of improving the heating or the annealing effectiveness is to increase the area exposed to the cooling or hot nitrogen by means of adding slots. In the same condition, four models with different slots were built. Based on the theoretical analysis of glass heating and annealing property in the molding process, finite element simulation was carried out. The results showed that the model with slots may decrease the heating and annealing time.

Based on the lapping principle of spiral bevel gears and hypoid gears, this paper focuses on a new automatic backlash adjustment method for lapping process, which includes on-line detection and measurement of backlash, automatic backlash control and software etc. The experimental results shows that this on-line automatic backlash control method is efficiency and stable in lapping process, and it can improve gear surface finishing and reduce transmission noise apparently.

An extracting method of normal residual error from a ground profile was proposed in this paper. Original measurement data was re-processed for obtaining an actual ground profile in an on-machine contact measurement system. The robust Gaussian regression filtering and NURBS fitting methods were employed to filter and fit these discrete data for getting the accurate realistic ground profile. By utilizing iterative partitioning algorithm, the normal residual error could be accurately obtained between the actual ground profile and the ideal one. Measurement data achieved from grinding experiment of aspheric mould were dealt with. After form error compensation grinding, the difference between normal residual error and original reached 40 nm in stead of initially 140 nm.

Silicone oil based magnetic compound fluid was prepared to polishing stainless steel in this paper. The new fluid consists of nano-sized magnetite particle, micro-sized diamonds, micro-sized iron particle and α-cellulose. The characteristics of the fluid were analyzed. The length and quality of the magnetic cluster in the compound fluid was observed under a magnetic field. Polishing experiment of stainless steel was conducted using the silicone oil based magnetic compound fluid on an inclined polishing finishing device. The micro morphology of the stainless steel’s surface was measured. The results showed the surface quality was improved remarkably and the final roughness of the surface was Ra (Average roughness) 0.020μm.

Glass molding is a high-volume fabrication method for producing optical components. Non-isothermal glass molding press (NGM) was proposed to fabricate optical glass, and its characteristics were studied by finite element method (FEM) simulation. The coupled thermo-mechanical analysis was carried out to analyze the key factors such as temperature distribution, stress distribution and strain distribution. The non-isothermal and isothermal glass molding (IGM) was studied, and optimal temperature match between glass and mold was obtained.

Stainless steel; Aspheric mould; Ultra-precision turning; Magnetorheological polishing Abstract. The ultra precision turning and the inclined-axis type of magnetorheological polishing were introduced for the small aspheric mould of stainless steel. The method was based on the principle of two kinds of processing methods, and the processing feature of stainless steel material. Firstly, the ultra-precision turning was employed to shape aspheric surface rapidly and obtain a relatively good surface. And then, the inclined-axis type of magnetorheological polishing as the final finishing was used to decrease sub-surface damage to obtain better precision. Several of experiments were carried out, the experimental results show that surface roughness can be achieved for Ra 0.0073μm.

In traditional manufacture of grinding wheel, a key problem is the randomly arrangement of the diamond abrasives, which results in randomly distribution of surface roughness. In this paper, through controlling the magnetic field during the forming process of the grinding wheel, arrangement of diamond abrasives is orderly to obtain a more orderly surface roughness. The forming process of diamond fine grinding wheel is studied under magnetic field controlling. The grinding experiment for aspherical mold was carried out on the tungsten carbide YG8 and the surface quality after grinding was also analyzed

Glass lens molding is a high-volume fabrication method for producing optical components. In this paper, combined with the orthogonal test method and finite element method (FEM) simulation, the coupled thermo-mechanical analysis was carried out to analyze the key process factors. In order to reduce the testing time, an orthogonal test with three sets of level factors and three parameters is conducted to obtain the optimal molding process parameters. The result shows that the most significant parameter is molding velocity, the other effect parameters are molding temperature and friction coefficient. According to the previous analysis of orthogonal experiment, it is shown that the best optimal finishing process parameters were A2B1C1.

This paper reported a deterministic method to predict geometrical interferences between grinding wheel and workpiece on ultra-precision grinding for micro aspherical lens mould. An inclined axis grinding mode controlled by B axis is considered and investigated. For avoiding the interference between the grinding wheel and the workpiece, the relationship of the radius of the grinding wheel should be analyzed in the grinding process. In this paper, a geometrical mathematical model for avoiding interferences between grinding wheel and workpiece is built up, and three interference conditions are analyzed. The maximum diameter of the cylindrical grinding wheel is computed and obtained for grinding axisymmetric aspheric surface.

Focusing on the characteristic of hard-to-grinding for viscous materials, such as titanium alloy, systemic process experiments were done about grinding viscous materials, such as TC4 titanium alloy, under the high efficiency deep grinding (HEDG). Based on the analysis to the changing and characteristic of unit area grinding force F' with maximum undeformed chip thickness hmax and equivlent cutting thickness aeq , this paper discussed the changing of its material removal mode and analyzed the changing and characteristic of grinding force ratio N, specific grinding energy es with corresponding parameters further. Then, it was analyzed about the consumption of grinding power on the process of HEDG for TC4 titanium alloy. The experiment results reveal that application of HEDG can improve machining efficiency of grinding viscous materials.

This paper focuses on experimental investigation on high speed grinding of 40 Cr steel with vitrified CBN grinding wheel, the effect of grinding process parameters, such as grinding speed, depth of cut, and feed rate, on the grinding force and surface roughness are analyzed The experimental results reveal that the grinding force decreases with higher grinding speed and increases with the addition of depth of cut or feed rate, and the surface roughness is satisfactory in high speed grinding.

Focusing on the characteristic of hard-to-grind for titanium alloy, experiments were conducted about grinding TC4 titanium alloy under high speed deep grinding (HSDG) condition. The changing of grinding force per unit area with maximum undeformed chip thickness hmax and equivalent cutting thickness aeq are analyzed in this paper. The effect of maximum undeformed chip thickness hmax and specific material removal rate Zw' on specific grinding energy es, material removal mechanism and consumption of grinding power in HSDG process are also discussed. The experiment results reveal that application of HSDG can improve machining efficiency of grinding TC4.

Titanium alloy is a kind of typical difficult-to-machine materials. In this study, the surface integrity of titanium alloy Ti-6Al-4V machined by electrical discharge machining (EDM) method are experimentally investigated and analyzed in term of surface roughness, SEM micrographs and microcracks. Effect of discharge energy and material properties on surface integrity are presented in this paper.