Search

A new type of vibration platform was presented and its dynamic characteristics was studied in this paper, A virtual prototype model of vibration platform was built by using software Soldworks and ADAMS.The flexible body model of spring was built based on ADAMS flexible module,rigid-flexible coupled dynamic of vibration platform were analyzed by using simulation, the natural frequency, model of vibration and frequency response were further analyzed. The stiffness of spring and flexible cable were optimized according to the analysis results, The post-optimality simulation results show that the stability and frequency response of vibration platform have improved.

In the ultra precision measuring and machining, precision measuring instruments and precision accuracy are not only related to the precision of the instrument itself, the vibration from the surrounding environment, and many other factors also determine the accuracy of the measurement and processing. In order to solve the micro-amplitude vibration and shock proof problem of high precision equipment, the article adopted the active vibration isolation technology to build the vibration isolation experiment system based on the pneumatic artificial muscle as the action, according to the characteristics of the vibration isolation system and performance requirements, The experiment was completed by using PID control algorithm. By comparing with passive control, the results show that the vibration isolation system has good broadband vibration isolation effect, in the low frequency, effect is remarkable. This study laid a foundation for further control of pneumatic muscle in isolation system.

This paper is a detailed study on the recycled concrete two-way slabs with stud-shear reinforcement, failure mode and failure mechanism are given. Further, by using the ABAQUS nonlinear finite element software to simulate the punching failure of recycled concrete two-way slabs with anchor bolts.Through the reasonable choice of the material property parameters 、the geometric parameters、the boundary conditions to get the reasonable results. In this paper, the conclusion can be used to provide the basis and reference in improving the punching resistance and ductility of the recycled concrete two-way slabs.

Radius filler is a kind of filling material which is used in triangle gap of the composite girder and rib. To optimize the hand-made craft of radius fillers and specify the evaluative requirements for detecting radius fillers, a research on handcraft parameters of the radius fillers had been conducted; the boundary dimension, microstructure and mechanical property of the R6 radius fillers had been characterized with the use of different detective methods and the microanalysis includes: nondestructive testing; microscope photos; fiber volume fraction and void content. The evaluative requirements to detect the quality of radius fillers have been established and its validity has been confirmed by the R8 radius fillers.

The most expensive and principal step in the process of converting cellulosic biomass into biorenewables and biofuel is the pretreatment during which lignin and cellulose crystalline structure is broken down. In this study, TiO2 nanoparticles were utilized as photocatalyst in addition to alkaline (ammonia and sodium hydrate) treatment of corn stover biomass to improve delignification ability and reduce the energy and chemical loadings to make the process more environmentally friendly. Raman Spectroscopic imaging, as an accurate and rapid chemical characterization method, was utilized to investigate the molecular compositional and structural changes occurring during the pretreatment process in the corn stover biomass qualitatively. Lignin characteristic peaks at 1,600, 1,620 and 1,690 cm-1 as well as cellulose characteristic peaks at 1,059 and 2,888 cm-1 were identified through Raman Spectroscopic measurement as indicators of the effects of the pretreatment. Real-time quantitative analysis of these functional peaks revealed the molecular structural changes during delignification, potentially may lead to optimization of the processing parameters to reduce the processing cost in the future.

Cu-15Ni-10Mn alloy as-cast, which smelted at atmosphere, has a typical dendrite structure in Ni segregation characteristics. The content of Ni is higher on dendrite arms spacing than on the dendrite arms, but the content of Mn is less than on the trunk. Due to the Mn oxides easily, the processing performance of alloy as-cast cant meet the requirement of metalworking. The gas content of ingots can be reduced by adding a small amount of zinc during smelting, and the metalworking features can be improved by adding trace Ti that will refine the arms of alloy. The research results show that the grains of Cu-15Ni-10Mn alloy as-cast can be refined by tiny amount of Ti. The grain size decreases with the increase of the content of Ti, the branches size of alloy adding 0.2% Ti is about 30μm that is only 49.4% the size of the alloy without Ti. Titanium, copper and Nickel can form compounds of CuNi2Ti. The hardness peak of alloy with 0.2%Co is 114Hv that is 8% higher than the alloy without Ti. The electrical conductivity of Cu-15Ni-10Mn alloy as-cast waves not clearly.

The effect of polyethyleneimine (PEI) in precursor solution on the morphology and superconducting properties of YBa2Cu3O7-x (YBCO) films grown on LaAlO3 (LAO) substrates by metal-organic deposition (MOD) method was investigated. The morphologies of the YBCO films were different based on the different amount of PEI addition from 0.25 g to 0.9 g in 10 mL precursor solution. Furthermore, research results indicate that the PEI helps to improve the critical current density (Jc), the uniformity of surface morphology and c-axis orientation of thin film. The highest critical current density (Jc) of 2.17 MA/cm2 at 77 K is obtained in YBCO films fabricated on LAO substrates when the amount of PEI is 0.5 g in 10 mL precursor solution. YBCO layers with about 400 nm in thickness can be processed without cracks and holes during the whole heat treatment, which takes only 7.5 h.

The existence of noises have great interference on image processing, so the elimination of image noise is of great importance. In this paper, based on the digital image processing, the methods of average filter, wiener filter, median filter, two-dimensional wavelet filter, maximum and minimum filter are used to eliminate the salt & pepper noise of image. Then we analysis and compare the results of the five methods to find the best way to eliminate the image noise.

By the scanning electron microscopy and experimental study, curing mechanism of the ZL-1 curing agent was studied in this paper, and the curing mechanism of the traditional curing materials in the soil clay was also analyzed. The study found that ZL-1 has a good curing effect on curing agent to the lime and clay mixture ，cement and clay mixture, and has greatly improved water stability, durability. And the best mix proportion was given.

At all-state test of SCR system，the maximum NOx emission value occurs at 1100r/min and 50% of The throttle opening degree condition. The NOx emission value is 2611.08ppm. During simulation research, Influencing factors such as urea spray, reaction temperature, space velocity and NH3/NOx concentration proportion are elaborated. During 0.4s simulation cycle, it shows better atomize results and better homogeneity. The reaction temperature on catalyst is kept at 319oC value which is helpful for continuous SCR reaction. NH3/NO concentration proportion is kept from 0.2 to 0.3, which NOx reduction rate is from 65% to 75% in accordance with test results on the base of 1200r/min condition. The research can provide references for optimization on compact SCR system.

A new class of variational models based on Besov spaces B1,1s(s>0 ) and homogeneous Besov space E=B∞,∞-1for image decomposition is proposed. The proposed models can be regarded as generalizations of Aujol-Chambolle model. The associated minimizers of variational problems can be expressed by applying different shrinkage functions which depend on the wavelet scale to each wavelet coefficient. The wavelet based treatment simplifies computation of this class of variational models. Finally, we present numerical results on denoising of both real and remote sensing images.

In electricity production and supply system of China, thermal power continues to dominate a larger proportion. In recent years, be influenced by energy-saving emission reduction and low carbon development policy, the environmental impact issue of thermal power project aroused great attention. This study has established a comprehensive evaluation system by analyzing integrated comprehensive effects of the environment caused by thermal power project. Combining with AHP theory, entropy theory and TOPSIS evaluation ideas, the study created a set of scientific assessment model. The research has verified that the validity of the model through empirical studies. And it provided a good theoretical basis for environmental management comprehensive thermal power project.

In recent years, wind energy develops rapidly in China and its comprehensive management research deepens continuously. This paper studies the wind energy level and summarizes the current development situation of our country. The study puts forward a forecasting analysis using Grey Forecasting Theory, and proposes several suggestions for the comprehensive development. The result has reference for improving the management level of the wind power.

The paper proposes three kinds of improved main-beam structural style of electric single-girder crane and established FEA model for each style. The stress values of stress concentration points of improved structures have been compared to traditional structure. The fatigue strength of points where easily occur fatigue failure have been analyzed using local structure stress method and Master S-N curve. According to fatigue analysis, the minimum number of effective cycles is N=3.73×105, which can meet the design specifications well. This study will provide some ideas for main-beam design and improvements.

Calcium sulfate/hydroxyapatie (CaSO4/HA) composite bone fillers were fabricated through molding method. Their structure and properties were characterized by infrared spectroscope, scanning electronic spectroscope, x-ray diffraction and degradation test. The results show that HA crystals were attached to the CaSO4 crystals and prevented the growing of sulfate crystals. So their size is shorter than that of CaSO4 crystals prepared from pure CaSO4 semihydrate, and some even had defect. The resorption rate of CaSO4 bone fillers was decreased when HA was incorporated.

Plaster of Pairs is a common used implanting material. However, its rapid degradation or drug releasing rate as a bone filler or drug carrier does not meet the requirement of clinic application. In this paper, plaster of Pairs bone fillers loaded with drug was prepared and their degradation and the drug release period were adjusted by coating their surface with polymers. The results show that the structure of coatings can effectively control the degradation period of the bone fillers, and consequently the drug release rate.

In this article, we explore the relation between the continuation of the architectural context and the integration of the surrounding environment. First, we suggest that the local context should not be lost in the process of urbanization. Then we present Fujian San-fang Qi-xiang, Changting,Wufu Town as case analysis. Also we combine a number of success examples at home and abroad. We eventually come to the conclusion that the continuation of context should promote with the surrounding environment.

The topic research, standard device for power frequency lines parameters tester, can be used for calibrating the power frequency lines parameters tester. The equip functions involve: positive/zero sequence impedance, positive/zero sequence capacitance, etc. The topic introduces the working principle and composition of the standard device, focusing on the technology of virtual complex impedance and accurately amplitude control. The paper end gives the relevant specification and experimental data. The research of the standard device can be used to resolve the traceability of power frequency lines parameters tester.

This Article focus attention on the regional non-material cultural identity of the cities and towns around the the Yangtze River Delta . Historical and geographical context, rural festival temple fair, the daily living space is the three most representative components. It has great significance to the formation of regional economic, cultural and recreational attributes during the historical period Paper to the Xinchangtown of Nanhui County, take the historical maps of boiling down the wave; theannual festival, field activities, "March 28 Festival Temple Fair,"and traditional local cuisine as the main object of study: First, from thespirit of the idea, industry background and political and cultural backgroundand so, it analysis the impact of the history of formation and evolution of thesalt pan and the impact of salt industry for the spirit of the ancient localpeople, culture and life; Secondly, the elements of field culture arediscussed, then ,the festival market, business, entertainment space areanalyzed; Further attention later in the article section was taken to theinteraction of the field activities and the settlement pattern and itsmanifestations in daily life, which discusses the existence and impact of thelocal market place to the rural section and conduct the basic research for thethe rehabilitation of Festival Temple Fair

The hot power spinning process of TA1 has been studied on the base of isothermal plane compression model in this paper. The microstructures of spun workpieces and plane compression specimens are analyzed and the microstructure evolution mechanism has been investigated. The results reveal that the microstructure evolution has similar mechanism between power spinning and plane compression. Plane strain compression can be used to predict and control the microstructure of as-spun TA1 workpiece.

The purpose of this paper sets forth the various hazards of vacant rooms. By analyzing the phenomena of the Housing and relevant data, the paper demonstrates the urban and town housing in China is not in short supply in the aggregate and the discrepancy between housing supply and demand is due to the real estate market speculation and investment which have led to the massive housing vacancy. These vacant houses waste a lot of resources, impact the life of other inhabitants, impede the developing process of the city’s livability, distort the relationship between the supply and demand in the real estate market, and push up the house prices. Therefore, the reduction of vacant housing is more important than the implementation of green building, this conclusion, and vacant housing hazards and data are where the innovation of this article.

The design and numerical simulation and analysis on non-pneumatic beehive damping tire were discussed in this paper by finite element techniques. And use the molding software filling its experimental to analyze the process of injection molding qualities for the reasonable mold design. And the corresponding improvement measures, the rationality of mold design and molding process were arised for quality issues according to the simulation analysis.

One of the main hurdles for the wide use of current Ag-filled conductive composites is the high cost of Ag fillers, while the challenge for low cost copper-filled composites is their poor reliability. In this study, the Ag-coated Cu flakes was chosen as conductive fillers and a surface modification with coupling agent, to achieve good bonding between the flakes and the Polydimethylsiloxane (PDMS) matrix, was applied to improve the mechanical and conductive properties of the PDMS based composites. The resulting composites obtained through modification showed an increase in hardness by 13.1% and tensile strength by 28.4% relative to the composites without coupling agent. In addition, the reliability of conducting composites was discussed and the results showed that the coupling agent played a great role in preventing the corrosion of the exposed Cu during aging. The volume resistivity of the composites, filled with untreated Ag-coated Cu flakes, increased from 0.0039Ω·cm to 0.0059Ω·cm under aging at 85°C and 85% room humidity (RH) in a temperature/humidity chamber for 48 h, in contrary, the volume resistivity shift of the composites with treated flakes was almost negligible, just changed from 0.0043Ω·cm to 0.0045Ω·cm. More importantly, the prepared conductive silicone rubber filled with Ag-coated Cu flakes with the resistivity (0.004Ω·cm) comparable to the relative commercial products can be used for electro-magnetic interference (EMI).

For the measurement of shearer shaft geometry signal contain the axis of rotation error and the measurement error, made of two separate programs from shearer shaft the geometric method of measuring signal acquisition and signal processing error. The program is based on the analysis of the shearer shaft Two-point method of roundness measurement method and error separation technique. Using two displacement sensors and a combination of programs to measure the angle sensor, and an equation using the Fourier transform of elimination and separated from the measurement signal roundness. Then, 53H, and wavelet signal Noise algorithm such as the error of roundness error signal separation. Simulation results show that the method has a higher real value and better convergence for coal mining shaft roundness error in the separation of signal processing.

In this study, a thixotropic agent was applied to improve the aspect ratio of the silicone rubber gasket and the resulting obtained through modification showed an increase in aspect ratio from 0.26 to 0.91 with the relative to the gasket without thixotropic agent. Compared with the silicone rubber without thixotropic agent, the mechanical properties of the silicone rubber with thixotropic agent were discussed and the results revealed that the shift was very small. In addition, using Ag-coated Cu dendritic powder as conductive fillers, conductive silicone rubber with the resistivity (0.004Ω·cm) was prepared comparable to the relative commercial products can be used for electro-magnetic interference (EMI). The reliability of the conductive composites under aging at 85°C and 85% room humidity (RH) in a temperature/humidity chamber for 48 h was also discussed and the results showed that the shift of the volume resistivity was almost negligible which can meet the actual needs completely.

Along the context of technological development, architectural development experienced the raw type technical period; the combined period of art and technology; and that of technology, art and ecology three combined as one. Now, the context and the place of high emotion associated are again merge into high-tech buildings. Combined with our practice of creation, this paper introduces and advocates this new direction of the development of technology.

The construction of the cities in China is under rapid development. Large-scale construction and renewal cut off the trace of city history - our cities are losing memories, whereas the city renewal of Bunkyo Ward in Tokyo post-War is in “transition in harmony with natural and historic surroundings", which can bring happy memories to people everywhere. This paper collected historic photos of the main streets, views and spots in Bunkyo Ward in the last 50 years, and take many new photos at the same place. In comparison with old views, we can still see some sparse and existent vestiges, misty archaic rhyme through the new building and the view. Which in contrast, in the Central 817 Road in Fuzhou. From the comparison between present and past since the 1980s, we can figure out: the urbanization in modification process treated the old city in another attitude which leads to another results: Changed Scenes with No Memories.

A certain project of tri-tower suspension bridge of which the main span was 1080m was taken as a case study of the mid tower stability. A 3D beam FEM model has been carried out to investigate the global mechanical behavior of the bridge in which the internal force response to several different typical load cases were specifically concerned. Moreover, the cable spring stiffness to the mid tower was defined as the ratio of the initial horizontal forces acting on the top end of mid tower to the corresponding horizontal displacement. And the effect of this equivalent spring stiffness on the stability performance of the mid tower was compared to other tow constraint conditions to the tower including free constraint and pin constraint. The comparison showed that the cable equivalent stiffness was 4342kN/m when living load was acting along the whole main girder of the bridge while this value varied with different load cases. The difference between the effect caused by the cable spring stiffness and the free constraint was small indicating that the stability of the mid tower was not sensitive to the cable constraint. In addition, with the increase of the equivalent spring stiffness, the longitudinal buckling eigenvalue also became larger and gradually approached the condition of pin constraint.

The evaluation of airport logistics competitiveness can identify the airports’ advantages and disadvantages, and take certain measures to solve problems. In this paper, the airport logistics competitiveness evaluation index system has been built. The application of AHP method evaluates the logistics competitiveness of Hangzhou Xiaoshan International Airport (HIA) and the other four airport of Asia Pacific in comprehensive. The advantages and disadvantages of HIA in logistics have been obtained, which provide a scientific basis to improve its logistics competitiveness. The conclusion of the study is of some practical significance.

As a new fixed-abrasive machining method, chemo-mechanical grinding (CMG) is developed from chemical mechanical polishing (CMP), with the obvious advantage of geometric accuracy determinacy and no slurry. To improve material removal rate and enhance the popularity of CMG, this paper introduces a combined grinding method, i.e., two dimensional ultrasonic vibration assisted CMG (2D-UACMG). Si wafer is taken as the workpiece and the influence of ultrasonic vibration modes and process parameters on the surface roughness and the material removal is examined. The results show 2D-UACMG can obtain better surface quality with little surface damage at nanometer level compared with the conventional CMG without the ultrasonic vibration.