Search

In this paper the effect of lattice friction stress on the process of dislocations annihilation is considered using dislocation dynamics method. It is shown that if dislocations of the opposite sign are located in the area where their own tension is greater than the friction stress, they annihilate. Consideration of this fact allows to connect the microscopic processes of annihilation with evolution of dislocation density in the sample under small external stresses and unloading. The area in which annihilation occurs is calculated to be proportional to the square of the friction stress/shear modulus ratio.It is also shown that the parameter responsible for the rate of dislocation annihilation depends on the cube of the ratio of the friction stress to the shear modulus, because it is inversely proportional to the number of annihilating dislocations and the time in which a dislocation pair annihilates.

The transporting of sediments across watershed systems and their placement in reservoirs causes expensive issues for the operators of dams in many different nations throughout the world. In addition to the reservoir's functional capacity steadily decreasing as sediment settles in it, silt removal is a sensitive and challenging process that frequently necessitates taking the reservoir out of service, which is practically unachievable in dry and semi-arid regions. De-silting by hydraulic dredging has recently become a necessity to increase their longevity. But during this operation there are load loss exists so it is necessary to find solutions to reduce it. The present paper revealed that use the Sodium Tripolyphosphate as a reducing agent of the friction factor during the hydraulic dredging of dams. To carry out this study, a rheumatic characterization of dams sediments and dams sediments -sodium tripolyphosphate mixtures was carried out using a torque controlled rheometer (Discovery Hybrid Rheometer DHR2 from TA instrument). The flow curves as a function of dose of sodium tripolyphosphate added to dam sediments were analysed by the modified Cross model. It is clearly shown, in this work, when the quantity of sodium tripolyphosphate is less than of 0.4 % causes a decrease in the yield stress, the zero shear rate viscosity (lower Newtonian plateau) and the infinite shear rate viscosity (upper Newtonian plateau). However, when dose of sodium tripolyphosphate is greater than the critical dose, the the yield stress, the zero shear rate viscosity (lower Newtonian plateau) and the infinite shear rate viscosity (upper Newtonian plateau) are increased. As a result, this study find that the increase on thixotropic behavior of dams sediments is occurred by the addition of sodium tripolyphosphate in a concentration ranging between 0.2 wt% and 0.8 wt% to 40 wt% and 45 wt% of dams sediments. The study also demonstrated that adding of 0.4 wt% of sodium tripolyphosphate to 40 wt% and 45 wt% dam sediments decreased the friction factor by 96% and 25% respectively.

This paper reports the synthesis of ZnS Quantum Dots (QDs) embedded in PVA by aqueous precipitation method and its application in antibacterial as well as to find or estimation of Escherichia coli (E.coli) concentration by using ZnS/PVA QD based mem-mode nanodevices. The as-synthesized ZnS/PVA samples are characterized by UV-Vis spectroscopy (UV), Photo luminescence (PL), X-ray diffraction (XRD), Transmission Electron Microscopy (TEM) and Scanning Electron Microscopy (SEM). Antibacterial property of ZnS/PVA QDs against gram positive (S.aureus) as well as gram negative (E.coli) are tested. The antibacterial property is found to be more in S.aureus in comparision to E.coli. Mem-behaviour of the as-fabricated devices is observed through electrical characterization. COMSOL MP Software is used for simulating I-V characteristics. The voltage gap is found to be a promising parameter for estimating E.coli concentration with ZnS/PVA QDs as active material and an electrical circuit is presented

The characteristic pinched hysteresis behavior of memristors has been reported by stacks of a variety of materials. This paper aims to examine the principles of logic design using such two terminal memristive systems for high performance digital circuit applications. As against logic design with standard CMOS, the benefits of logic design with memristors have been stated. The realization and operation of memristor based AND and OR hybrid logic gates obtained by integrating memristors with standard CMOS logic have been discussed. The IMPLY and MAGIC logic families have been demonstrated by covering MAGIC NOR and NAND logic gate implementation with MAGIC NOR in detail. A qualitative comparison has been drawn towards the end of the paper to conclude on the suitability and application space for each of the logic families studied in this paper. This work also describes the hybrid CMOS-memristive logic family known as MRL (Memristor Ratioed Logic). With the addition of CMOS inverters, this logic family's OR and AND logic gates, which are based on memristive components, are given a full logic structure and signal restoration. The MRL family, in contrast to earlier memristor-based logic families, is compatible with conventional CMOS logic.

Monodispersed Ag nanorods were synthesized using a one-pot synthesis method. These Ag nanorods normally manifest dual surface plasmon resonance (SPR) peaks. This work presents a study of the variation of SPR peaks with variation in the shape of Ag nanorods. Shape variation was achieved through the degradation of a shape-controlling agent (PVP in this work) under white light irradiance with silica passivation to halt further shape variations. This paper also reports the growth & characterization of thin films of the synthesized rod-shaped silver nanoparticles on glass slides along with studies on band pass filter characteristics of the as-synthesized nanoparticles.

Road markings regulate and direct traffic by conveying specific information. It is of great significance to develop new road marking materials and improve the visibility of marking materials for improving traffic efficiency and ensuring traffic safety. This paper summarized the development status of various reflective road markings at home and abroad. In addition, the energy storage luminescent fluorescent/phosphor marking lines in road marking was emphatically generalized to evaluate the advantages and disadvantages of different improvement methods. Overall, strontium aluminate doped with Eu2+ co-doped with Dy3+ (SrAl2O4:Eu2+, Dy3+) phosphors and self-luminous pavement for energy storage had great prospects in improving road safety and reducing energy consumption.

Spinel ferrite nanoparticles are potential candidates for multiple biomedical applications. Spinel ferrite nanoparticles have been studied extensively for understanding physical, chemical, electro-optical as well as magnetic properties which are fascinating due to cationic distributions corresponding to tetrahedral sites and octahedral sites in a cubic phase. Biocompatibility and large magnetic moment are basic requirements in spinel ferrite nanoparticles for efficient functioning in specific application purpose. Fe3O4 (magnetite) is an important member of spinel ferrite group with high chemical stability and ferrimagetic material property at nanodimension. Superparamagnetic state and biocompatibility of magnetite (Fe3O4) spinel ferrite nanoparticle has already been proven. Spinel ferrite magnetite nanoparticles have been developed based on precipitation of iron oxide using ferric and ferrous ions at the ratio 2:1 in alkaline media at and above 100°C. The experimental parameters have been set to synthesize pure and uniformly sized magnetite nanoparticles. No other phases of iron oxides were detected other than magnetite spinel phase in the XRD result. The average crystal size has been determined from XRD peak broadening. Absorption spectra were investigated using UV-Vis Spectrometer and FTIR. Thermal and magnetic measurements were carried out Digital Scanning Calorimeter and SQUID Magnetometer. One sample of the prepared nanoparticles with polymer coating of polyvinyl alcohol has been studied for superparamagnetic nature. Superparamagnetic particles show saturation value of magnetization 51.26 emu/g at 100 K. ZFC-FC curves for two samples with polymer coating of polyvinyl alcohol and hydroxy-propyl methyl cellulose have also been studied. Keywords: Spinel Ferrite, Magnetite, Ferrimagnetism, Transition metal oxide, Superparamagnetism. Statements and declarations Competing Interests: The authors declare that there is no competing financial interest that are related directly or indirectly to the reported work in this paper. Conflict of interest: There is no conflict of interest. Acknowledgements The Authors are grateful to IISER Bhopal, CRF facility for providing instrumentation facility to characterize magnetic properties. We acknowledge thanks to Lovely Professional University for providing us necessary characterization technique for the XRD analysis and thermal analysis.

The recent developments in dielectric elastomers (DE) are spectacular. Currently, a DE as an actuator, 0.15 g of acrylic sandwiching SWCNT electrodes, is capable of lifting a weight of 8 kg by more than 1 mm at a speed of 88 msec. In the near future, DE motors could be used to drive electric vehicles. Moreover, the DE can be used as a high-efficiency sensor with the same structure. With a diameter of 20 mm and a thickness of 0.5 mm, it can accurately measure pressure from several kg to 150 kg. In addition, reversing this DE actuator (DEA) movement also enables high-efficiency power generation. In other words, when the DEA is stretched or pushed, it generates electric power. Single wall nanotubes (SWCNTs) were used as an electrode, and an acrylic DE power generation cartridge with a diameter of 80 mm was used. When the center of the DE power generation cartridge is pushed by about 15 mm, a power of 33.6 mJ is generated. Using these two DE cartridges, it was possible to charge a secondary battery through a DC converter. In addition to this power generator, practical research and development of power generation using wave power, wind power, waste heat, and fluids (ocean currents, water currents, etc.) is progressing. In this paper, we have described state-of-the-art DEAs, DE generators (including the case that the power generated locally by microgenerators are consumed locally), and DE sensors and explained their usefulness.

In this paper, a hollow square cross-section carbon fiber/epoxy composite beam was designed and manufactured. Evaluation of the beam behavior considered orientation and stacking sequence, aiming to reduce the number of layers and weight. Finite element method (FEM) was used to simulate the performance of the composite beam under 3-point bending and using three failure criteria, Tsai-Hill, Tsai-Wu and maximum stress. In order to identify the input parameters for the model, flat composites were tested under tension and compression. It was concluded that a minimum of 12 layers of unidirectional carbon fiber were required to reach the required load (44.5 kN). The prototype was successfully fabricated by vacuum-infusion process and subjected to 3-point bending test. The experimental failure load was within the predicted range by the Tsai-Hill failure criteria and maximum stress.

The process of mechanically activating chemical bonds usually involves applying external force. Since mechanical chemistry can be performed without solvents or with minimal amounts of solvent (catalytic quantities), it has become an imperative synthetic tool in multiple fields (e.g., physics, chemistry, and materials science) and is an attractive greener method for preparing diverse molecules. Catalysis, organic synthesis, solid-state medicinal preparation, metal complex synthesis, and many other chemistry fields have benefited from sustainable methods. The purpose of this paper is to shed light on the benefits of using mechanochemical methods to produce a pharmaceutical crystal that is composed of dendrimer nanocrystals. Consequently, we describe and examine the importance of mechanical procedures in forming dendrimers and pharmaceutical crystals in this review.