Search

High consistency refining (HCR) and low consistency refining (LCR) of unbleached Masson’s pine kraft pulps for sack paper were studied in this article. The properties of their refined pulp and handsheet were analyzed comparatively. The results showed a high consistency refining was more suitable for sack paper with unbleached Masson’s pine kraft pulp than a low consistency refining. High consistency refining is of advantage to retain the fiber length. The tear index of the handsheet of high consistency refining were higher than that of low consistency refining. The TtensileT TenergyT Tabsorption (TEA)T index and air permeability of the handsheet of high consistency refining which were crucial properties of sack papers were better, though higher tensile index could be obtained with low consistency refining.

Eco-friendly high-yield pulps (HYP) are becoming increasingly used to product high value-added fine paper that is traditionally produced exclusively with chemical pulps. However, due to the presence of a large quantity of photosensitive lignin in the HYP pulp to more effectively utilize woods resources, there is a concern on the long term brightness stability of HYP containing paper. In this research, various TiO2was added to coating colors to improve the light fastness properties of HYP containing coated paper. The effect on the stability of optical properties of coated paper including brightness, opacity, color difference and the degree of brightness reversion before and after accelerated aging were studied. It was shown that the brightness stability of the HYP containing coated paper increased with increased addition of TiO2. Rutile TiO2was especially more effective than other types of TiO2on yellowing inhibition of coated paper. At a dosage of 3 parts of rutile TiO2, the brightness stability of coated paper containing 20% of HYP was found to be even better than paper made of 100% chemical pulp coated with conventional coating color.

It is an important factor that the paper tension for web press printing and roll paper manufacture. Especially commerce web press is the more important. The commerce web press has not only the first tension control, but also the second tension control. The second tension control would control tension wave restrict accurate bound. The simulation method was discussed about paper tape tension the second tension control on some problems of high speed Web press controlling system in actual adjustment course, and different respond graph was obtained on the different controlling parameter by MATLAB and controlling system capability target. Intuitionistic and exact foundation was offered for system analysis, comparison and choice arithmetic, which benefits the further research.

The intention of this paper is to review of some recent innovative novelties about paper and board pigment coating raw materials. First an overview is given of “traditional” coating raw materials and the coating process. Then new starch based pigments and binders as well as novel plastic pigments are reviewed regarding their effect on coated paper properties. Finally it is concluded that further innovations and research are needed.

To enhance printing qualities, this study used refluxed silica (SiO2) from rice husk by hydrochloric acid (HCl) at different molarities and reaction times as coating agent for printed paper. Characterization of the refluxed silica from 2M HCl 120 min elucidated the purity of 98.7% and amorphous structure. Particle size of the silica exhibited uniform size of 3 μm and the color measurement (CIE L*a*b*) indicated 94.79+0.48+1.24, whiteness and color difference (E) were 84.85, 3.28, respectively. The coating agent was prepared by water-based varnish of acrylic resin mixed with the synthesized silica at different proportions: 0.0, 0.5, 1.0, and 1.5 (%wt), and later was applied on 170 g/m2-white kraft papers. The results showed that the water-based coating varnish with silica exhibited an increase of viscosity as increasing the amount of the silica. Printing qualities indicated that the vanished printed paper with 1.0% silica elucidated the highest details in shadow tone and text (font) sharpness. The color gamut yielded a wider scope than the printed papers which were varnished with the silica at 0.0%, 0.5% and 1.5%. Nonetheless, the color density showed insignificant difference to 1.5% silica varnished paper.

Paper-based material has been frequently used as part of packaging solution as an option towards reducing municipal solid waste generation. Various studies on mechanical behaviour of paper-pulp packaging material have been conducted based on the machining direction and cross machining direction. However, there is still gap of information on paper-pulp packaging material behaviour at diagonal direction. A study has been conducted to investigate the variability to tensile properties of paper-pulp packaging at various packaging section (draft and base surface) and different specimen orientation (horizontal, vertical, and diagonal direction). In this research, results from the stress-strain relationship obtained from tensile and compression tests are presented. The data obtained are further analysed using ANOVA to find out whether material variations are significantly different with varying sections and orientations. Findings in this research supported the anisotropic properties of paper-based packaging material. Draft surfaces exhibit weaker strength than base surface. Also, the variability of stiffness and strength of specimens are more significant in horizontal and vertical direction compared to diagonal direction.

This paper experimentally examined the impact of four different drying methods (free drying, press drying, vacuum drying and impingement drying) on paper physical properties including roughness, elongation, air permeance, tearing resistance, tensile index and bursting strength. The handsheets materials are HWBKP (Hardwood Bleached Chemical Pulp), SWBKP (Softwood Bleached Chemical Pulp), CTMP (Chemical Thermo mechanical Pulp) and ATMP (Advanced Thermo Mechanical Pulp). Good experimental data were obtained for the four pulps under different drying conditions. The results of our investigation indicate that press drying have lower surface roughness, elongation and air permeance but higher tearing resistance; the vacuum drying have higher roughness, tensile index and bursting strength; the impingement drying have lower tearing resistance, tensile index and bursting strength but higher elongation and air permeance. Selection of different drying conditions for effective productivity and quality improvement potential is proposed as a direction for the future dryer design.

This paper describes the precipitated calcium carbonate filler applied to paper industry, which was prepared by adding a specific crystal control agent. And a series of influencing factors in carbonation process was studied, such as carbonization temperature, concentration of milk of lime, carbon dioxide concentration and the crystal shape control dosage. Therefore the optimum conditions for preparation of chrysanthemum-shaped crystalline calcium carbonate were determined.

Paper pulp molding products meet the product-protecting requirements and operating requirements through all kinds of structural forms in the application of product packaging, fixation and product buffering shockproof. Paper pulp molding products structural design influences the buffering performance of paper pulp molding products and packaging requirements of the products, therefore influences the packaging structure, processing production, mold design and processing method of paper pulp molding products.

Low density printing paper was widely used in printing best-seller at present. Besides of high bulk, good stiffness, soft color, it also had some advantages, such as reducing user’s load, protecting eyes, extending the storage time etc. Quality index of domestic low density printing paper was lower than foreign index. The gap mainly expressed on tensile index specially. This study used Aspen BECMP as main pulp, as a result of its higher strength, lower cost and other advantages comparing with PRC-APMP. Here we discussed three pulps ratio to make low density printing paper. The results of experiment indicated that using Aspen BECMP was able to make low density printing paper by adding certain amount chemistry pulp. Moreover, the best bulk value can up to 2.45cm3/g, and the tensile index was 36.08Nm/g.

This paper presents a distributed machine vision inspection system, which has a large field of view (FOV) and can perform high precision, high speed real-time inspection for wide paper sheet detection. The system consists of multiple GigE Vision linescan cameras which connected though Gigabit Ethernet. The cameras are arranged into a linear array so that every camera’s FOV is merged into one large FOV in the meantime the resolution keeps unchanged. In order to acquire high processing speed, the captured images from each camera are sent into one dedicate computer for distributed and parallel image processing. Experimental results show that the system with fine detection capability can satisfy the requirements of real time detection and find out the defects on the production line effectively.

In this paper, we studied the possibility of wood powder in place of mechanical pulp in paper making to get high bulkness, also the dry-bleaching method of wood powder, the strength enhancement and retention effect for wood powder during paper making were all introduced and analyzed in detail.

Tobacco stem and tobacco dust made reconstituted tobacco paper-base with a paper-making method, effect of extracted and refined on tobacco stem and tobacco dust, particular effect of tobacco stem and tobacco dust ratio on physical properties, chemical composition and microstructure of reconstituted tobacco paper-base were studied. The results indicated that the content of water soluble sugars, total alkaloid, chloride, total nitrogen of the extracted tobacco stem and extracted tobacco dust were decreased, content of holocellulose was increased. With decreasing of tobacco stem pulp ratio (increasing of tobacco dust pulp ratio) of reconstituted tobacco paper-base, there was rapid decrease in tensile index, tear index, bulk and air permeability of reconstituted tobacco paper-base. The scanning electron microscopy (SEM) showed that tobacco dust ratio more than 30%, bulk of reconstituted tobacco paper-base decreased significantly. Content of water soluble sugar, total alkaloid, chloride and total nitrogen of tobacco reconstituted paper-base decreasing significantly after paper-making.

Some properties of paper sludge were analyzed, including water content, organic material content, pH value, fiber content, ash content,C,H,O,N,S and metal content in dried sludge. The results showed that water content was high, organic material content was high, pH value was in a neutral level, metal elements were varied. Besides, calorific value was detected in a thermal power plant.Disposal of residue wastes from pulp and paper mills is a paramount issue facing the world today. Paper sludge is the solid waste from papermaking industry. The sludge treatment and disposal process will bring about environmental pollution. Therefore,much attentions should be paid to disposal of paper sludge. It is expected that this paper can provide deep insights into the disposal of paper sludge.

For high print quality, halftone dots should have minimal dot gain and sharp, circular edges, the receiving surface must have a line, high-porosity structure and be hydrophilic. Paper surface chemistry requirements for good inkjet print quality are so unconventional that new paper grades for printing should be specially designed. In this paper, the printability, coating structure and the color reproduction after printing of coated paper was studied.

Waste paper recycling refers to a process of regeneration-ink and other impurities being removed from waste materials and pulp fibers being recycled. The ink is the main impurity for waste paper. Especially, the residual ink influences the quality of deinking pulp and determines its purpose. Therefore, to expand the scope of deinking pulp use, inks must be removed as much as possible, to reduce the residual volume.

The paper pulp compression molding material is one of the most commonly used materials in packing industry. Their mechanical properties attract attentions from professional visitors and researchers. It is a difficult work to test the mechanical properties as the paper pulps are thin, anisotropic and sometimes wet. To spray ink spots with the surface of the specimens is not allowed either. The digit image frequency correlation method (DIFC) is presented in the paper, the information carrier of the displacement is the nature texture on the tested surface. Image acquiring and analysis are accomplished by the CCD camera and computer. From the displacement field strain distributions were obtained and the mechanical properties of the paper pulp compression molding material were evaluated. The test system is simple and the sensitivity is adjustable. DIFC is approved a suitable test method for paper pulp compression molding material.

In is paper precipitated silica is used in coated paper coating. It shows that the effect of different silica on properties of pigment dispersion is different. The dosage of silica influences the properties of pigment dispersion too. The viscosity of coating is higher than the corresponding pigment dispersion. The higher the viscosity of pigment dispersion is, the higher the corresponding viscosity of coating is. The more the dosage of silica is and the littler the particle size of silica is, the larger water retention value of coating is. When the precipitated silica is used in coated paper coating, the viscosity of coating is increasing. If precipitated silica coat paper, the whiteness of coated paper increases by 1%-2%

The physical structure and chemical properties of coating layer have an important influence on transferring and setting of the printing ink. In this study, the effect of pigment on coating layer structure and surface properties was investigated. The surface topography was explored using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The findings indicated that the pigment affected the pore size, depth and distribution of the coated paper surface. The conclusions were drawn that coating could improve coating surface topography and calcium carbonate pigment compared with kaolin pigment was not good to the paper surface properties, which resulted in high roughness, low paper gloss, high ink absorption and low paper surface efficiency.

This paper uses the culture paper commonly-used filler PCC (precipitated calcium carbonate) and makes a good ratio of other raw materials and dosage of various other chemicals. Under the certain papermaking craft condition, with the certain quantum, the experiment changes the filler proportion of the paper to make paper samples and test the samples’ properties and the printing ink transfer.The experiment establishes an influence curve relationship, through that we analysis and draw the conclusion when the proportion of PCC is in the range 20% to 30%, it will get better ink transfer effect, which will provide reference for actual production.

For the family embarrassment and annoyance brought by the replacement of slippers when someone pays a visit, a cutting paper tape machine for sole coating was designed. Based on the detailed calculation and preliminary drafted general design scheme, the electric motor was chosen, the transmission ratio was distributed reasonably, the structural style and related parameters of worm gear were designed, and the stress strength was checked. Based on these, the three-dimensional model was established, through simply simulation, the scheme was verified and improved, and the parametric design was realized. Thus, one kind of convenient and practical cutting paper tape machine for sole coating is provided for families and high-grade places, which is greatly convenient to visitors.

In this paper, the effect of the charge of hydrophilic and lipophilic nanosized TiO2 on the optical properties and printability of coated paper was investigated. The parameters including brightness, opacity, surface strength and sizing degree were used to evaluate the optical properties and printability of coated paper. The effects of hydrophilic and lipophilic TiO2 on the properties of coated paper were discussed. It was shown that the optical properties and printability of coated paper increase persistently with the change of nanosized TiO2 charged from 5% to 15%. Once the charge of nanosized TiO2 was over 15%, the main properties of coated paper took on a downward tendency. The properties of coated paper were related to the surface properties of nanosized TiO2 samples. It was found that the lipophilicity of nanosized TiO2 sample played a more important role in the improvement of the coated paper properties, which was believed to be based on the fact that lipophilic nanosized TiO2 could be well compatible with the binders used in the paper coating.

The article introduces each component of feeding paper machine of printing press which are press feet mechanism, paper separation mechanism and paper transfer mechanism, the function and the principle of work. Each mechanism is undertook a variety of designs and we choose the best design of each structure according to its functions. Design adopted is as follows: Press feet mechanism adopts the cam-linkage mechanism; Paper separation mechanism adopts the cam-linkage slider mechanism; Paper transfer mechanism adopts the conjugate cam-linkage slider mechanism. The machine is simple, practical and reliable.

Preservative was very necessary used in coated paper coating. Preservative was typical paper additive which was low dosage and high yield. Preservative classification, function mechanism and application technology of coated paper coating was introduced and summarized by the numbers in this paper. Finally the development direction and prospect of preservative used in coated paper coating was prospected.

Having been coated, the surface unevenness and pores on paper were covered by a coating layer composed of fine particles and binders, which can absorb ink well, thereby a good uniformity and smoothness of paper could be obtained, consequently, the reproducing capability for printing dot and good whiteness, gloss and opacity can be improved. In theory, the ink rub resistance for coated paper print is mainly affected by the ink absorbance property of paper, printing conditions, ink components, rub medium and so on. In this study, seven different kinds of coated papers, the viscosities of the inks were adjusted with a viscosity adjusting agent, and then the prints were prepared by proofing with the ink with different viscosities. After drying, the prints were used for rub testing. The impact of the basic properties of coated paper and the content of reducer in inks on rub resistance were discussed on the basis of a comparative analysis of the experimental data. Printing color density loss rate and print color difference were exploited in this paper to characterize the ink rub resistance for coated paper prints. In this study, it was found that ink rub resistance was mainly influenced by ink absorbency and smoothness of the paper. Under the similar conditions, the color density of coated paper print decreases with the rub strength increasing, color difference increased gradually, but not linearly. With the increase of ink viscosity reducer content, printing density loss rates as well as color difference changed, but not be linearly.

The culture of Chinese white spirit is time-honored, and it’s loved by all Chinese people, so it’s also important of white spirit packaging. The paper puts forward a new and green solution of white spirit packaging with paper bottle, it’s made with mulberry/rice paper and animal blood. The paper bottle is light and green, and increases the white spirit’s nutrition value. There are several physical and chemical tests in the paper just to justify the new bottle’s performance. Physical performance test includes appearance defect test, compression and stacking test, impact resistance test, water impact strength test, permeability test and so on. Chemical performance evaluation includes stability, compatibility and endurance.

A kind of composite filler was prepared by using talc, 85。SR softwood pulp and CPAM. The effects of talc-fiber composite fillers on paper were investigated. The results showed that the composite fillers mainly adsorbed onto the surface of external fibrillatioed fibrils. Compared with commercial talc, the paper wih composite fillers addition had higher tensile index. It also showed that the composite fillers had some negative influence on drainage effect, when compared with the blank samples. Composite fillers which were prepared at CPAM dosage 0.6% had better effects on preparation of high filler paper.

AKD is an important internal size for paper pulp fiber. With recycled economy development, regenerated paper fiber becomes an important resource. In this paper, AKD is used as a modification aid by internal sizing method. It shows that the change of the dosage of AKD influences regenerated paper fiber Cobb value, but has no influence to paper surface strength. The proper pH value is from 7 to 9. The temperature has no influence to regenerated paper fiber Cobb value and paper surface strength. Appropriate modified starch is good for AKD modification fiber and increase of the surface strength of paper made from modified fiber by AKD. Amphoteric starch is better than cationic starch. Other added substances such as PEI, MPEI and PAE can improve the modification of paper fiber modified by AKD. So the adsorption of modified paper fiber decrease and the surface strength of paper modified fiber increase.

Different degrees of high degree of substitution cationic starch (HCS) were prepared and applied in paper coating. Effects of HCS on coating properties and coated paper properties were investigated, and the comparison of effects of HCS and PDMDAAC was made. The results show that the best amount of HCS in coating formula is between 2% and 4%. When the amount of HCS is 4%, whiteness of coated paper was the highest. The color density was the highest when the amount of HCS is about 4% and the degree of substitution is 0.64. HCS with degree of substitution 0.849 is better than PDMDAAC in some respects, and the print image density achieved satisfactorily.

The object of this work is to evaluate the optimal process of stickies removal on steam-explosion pulping from recovered paper. OCC (Old Corrugated Container), offset paper and coated art paper are presented for steam-explosion treatment. The parameters tested by single-factor tests are: liquor, explosion pressure, heat preservation time, and the charge of sodium hydrate and sodium silicate. The criterion used to characterize the stickies removal efficiency is the consistence of macrostickies and DCS in pulp after treatment. The compositional analysis are achieved the optimal explosion conditions. The use of steam explosion would be desirable in dealing with recovered paper.

Carbon fiber paper was coated with multiple layers coating composed by conductive and magnetic fillers. The electromagnetic shielding and conductive properties of the coating were investigated. The effluencing factors such as the ratio of conductive and magnetic fillers, the composition of magnetic fillers, the contrast of coating method, the structure of shielding layer were assessed according with effectiveness. The results showed the best component for the coating layer was: conductive substrate, conductive coating layer and magnetic coating layer sequently. The compound of magnetic fillers with differenet electromagnetic interaction mechanism would produce a complementary magnetic loss, and display a high absorption in broader frequency band. The shielding effectiveness of multi-layer coated carbon fiber paper at 1.5 GHz was shown up to 45 dB.

The main objective of this study was to investigate the effect of drying condition on the binder distribution and characterize the binder migration in the method of numerical and visual analysis by Scanning Electrical Microscopy (SEM), Atomic Force Microscopy (AFM), and Laser Scanning Confocal Microscope (LSCM). In this study, Rhodamine B was used to stain the binder and as the probe to characterize z-directional distribution of the binder using LSCM. The results implied that it was reliable and effective method using LSCM to characterize the z- directional distribution of binder and analyze the influence of dry condition on binder migration. It could be concluded that the dry temperature played an important effect on binder distribution in coated paper and high dry temperature accelerated binder migration to the coating surface, however low drying temperature made binder migrate towards the interior of base paper. Moderate drying is good to binder distribution and coating layer forming.

Traditional cast coated glossy photo paper production process due to its characteristics that the water evaporates from non-coated cast side, so the coating speed is slow, ground paper is non-waterproof paper, therefore the paper products are easy to transmutative, as the cast shows that the formation of dense coatings membrane, the lower ink absorption. To solve such the problems, a novel porous ink receiving layer constituted by a litter amount of a hydrophilic binder(PVA) and a cross-linking agent, a large amount of inorganic pigment(SiO2) and a hollow structural plastic pigment. In this paper, the effects of the hollow structural plastic pigment rheological properties of the color and the printing and preservation properties of ink jet paper were investigated. Because of the thermoplasticity of the plastic pigment the calendering and dry technology were also studied. From the viewpoint of water-fastness and preventing the penetration of binder, the resin coated paper(being so-called RC paper) is selected as the substrate.

Coating pore structure of low gloss coated paper based on different pigment blends was analyzed using mercury intrusion method in this paper. The results show that pore size of coating layer structure of low gloss coated paper ranges from 20nm-500nm, and the range from 500nm-5000nm is mainly from base paper and interactions between coating color and base paper. Printability of coated paper can be well related with coating pore structure. Print gloss is strongly influenced by pore size and pore volume. Large pore diameters and small pore volume of coating layer structure can improve print gloss. Ink density increases with the increasing of pore diameter while the pore volume is kept constant. The increasing of pore volume of coat layer structure will improve capillary absorption and then improve ink absorption. The control of coating pore structure is very important for producing low gloss coated paper.

In this paper, Water glass and sulfuric acid were used as raw materials to do the synthesis of hydrated silica by the method of precipitation, and then hydrated silica is applied in paper coating. By examining the changes of the coated paper’s various properties to study the effects of different reaction conditions to the final products. And then we obtained a optimal synthesis conditions: sulfuric acid concentration 25%, reaction time 50min, reaction temperature 80°C, sodium silicate modulus 2.8, stirring speed 150r/min, the relative amount of sodium sulfate content compared to SiO2 is 25% .And at last the outward appearance of the hydrated silica and the structural changes in paper coating were observed by scanning electron microscopy.

As one of the main emission sources of PCDD/Fs, the pulp and paper industry has always been public concerns. In China, the consumption of non-wood fiber as raw material of pulp accounts for a relatively larger proportion in the total productivity. Here, the unintentionally produced PCDD/Fs emissions of five Chinese non-wood pulp and paper mills were investigated. The results showed that the increment of PCDD/Fs after bleaching with chlorine was about 1.71-28.19 times in pulp and 3.96-28.82 times in wastewater based on the existing technologies. In order to reduce the unintentional production of PCDD/Fs, the BAT/BEP transformation program was proposed as cleaner production initiatives featured by less or free use of chlorine in bleaching process, and evaluated by reduction effects and costs. The study showed the application of Elemental Chlorine Free (ECF) sequences in bleaching process with improving technologies in other production stages would effectively decrease the generation of PCDD/Fs, other pollutant load as well as the water consumptions.

The physical structure and chemical properties of coating layer have an important influence on transferring and setting of the printing ink. The typical objective of coating is to improve the appearance and printing properties of paper. In this study, the effect of drying condition on coating layer structure, surface properties, and print quality was investigated. The relationship between surface topography and drying condition was explored using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The conclusions were drawn that high and low drying temperature were not good to the paper properties, which resulted in high roughness, low paper gloss, high ink absorption, low print gloss and paper surface efficiency. The findings indicated that the coating drying temperature affected the pore size, depth and distribution of the coated paper surface. Moderate temperature was benefit to pigment particles and binder arranging orderly, which made the coating surface had high smoothness, gloss, paper surface efficiency, and modest ink absorption.

This paper studied some kinds of realization modes of speed chain compute, load distribution and operation aimed at the realization of paper machine driving system. The frequency conversion control system based on PLC cooperating with digital manipulator was brought forward. It was mainly made up of three parts: PLC, frequency converter and digital manipulator. It used PLC to realize digital speed chain and load distribution. And it exchanged data and parameters by communication through field bus network. The results indicate that the problems of speed chain compute, load distribution and operation were solved effectively by data gathering and computing with PLC, so it is a driving system of high performance.

This article introduced the superwater’s action principle for controlling slime pulp and its virtues. And then it studied its bactericidal and ameliorative actions in close system of whitewater. The article also compared superwater with other conventional bactericides. At the use level, concentration, actuation duration and bactericidal ability, superwater system excelled conventional bactericides. Furthermore the superwater can improve a series of problems in close system of whitewater. At last, a pilot scale test about superwater system has been carried out in a packing paper company. The test indicated that the superwater in whitewater can increase yield and save cost.

This article studied on these factors which influences the surface strength of packing paper. Through a series of tests, a model has been found. This model could guide the adjustment about fiber composition and beating process. And then a pilot scale test about this model has been carried out in Henan. The conclusion indicated that surface strength, printability and other strength indexes have been improved by adjustment of fiber composition and beating process scientifically. The ratio of softwood pulp has been reduced from 28% to 23%~25%. And the surface strength has been increased from 0.8~1.2m/s to 1.5~1.8m/s. Furthermore, when the ratio of softwood pulp is 23% and chemical-mechancial pulp is 7%, the packing paper still has a good printability.

Fluorescent whitening agent is relatively small dosage in the coating, but it has great influence on the properties of the coating and ink-jet printing qualities. With the increase of fluorescent whitening agent dosage, the PH of the coating rose but the viscosity was hardly to change. The brightness of coated ink-jet printing paper and color density of the printing image firstly presented the trend of increasing then decreasing. What’s more, when the brightness of the coated paper achieved to the maximum, color density and contact angle properties were the largest. Chromatic aberration property of the image reduced from 1.87 to 1.75, when the addition of fluorescent whitening agent rose from 0.1% to 0.5%. While the dosage was rose to 0.9%, chromatic aberration increased to 2.15. The gloss of coated paper decreased with the dosage of fluorescent whitening agent increasing. In sum, fluorescent whitening agent can enhance the brightness of the coated paper as well as the printing properties. The results show that the best brightness and printing qualities of coated ink-jet printing paper are obtained, when the fluorescent whitening agent is 0.5%( relative to pigment).

It is very important to measure paper fiber density and equivalent diameter for pulp suspension as solid-liquid two-phase flow in fluid dynamics study. There are some kinds of ways to measure fiber density，but not be suit for pulp fiber density because of their limitations. By using kajaaniFS300 fiber analyzer provided by Mesto ltd company to compare and measure all kinds of fiber length, fiber coarseness, weight average fiber length can more accurately show the actual length of fiber. The results shows that it is apparently more appropriate to calculate fiber density by using fiber coarseness, weight-average fiber length and weight-average fiber width, and fiber equivalent diameter should also be calculated according to the same weight-average fiber length and weight-average fiber width.

The effect of flotation parameters such as flotation consistency, temperature, flotation time, air to pulp ratio, and velocity of pulp flow (turbulence level) on OMG/MOW deinking efficiency was studied by using a high-consistency laboratory pulper and a laboratory deinking cell. The optimized flotation conditions were: flotation consistency 1.1%, 40°C, 8min, air to pulp ratio 40%, velocity of pulp flow 3.5m/s and pH 9.0. By using the optimized flotation conditions, the deinked pulp brightness could reach 70.56%ISO, 11.78%ISO higher than that of the control, the effective residual ink concentration was 108.46 mg/kg, which less than 378.14mg/kg of the control, theoretic deinking efficiency was up to 88.41%.

In the papermaking process, improve the efficiency of dehydration is the most important part of the control system of the paper machine press section, in order to improve the the papermaking efficiency and the quality of paper, the paper analyzed, the shoe working hydraulic oil passage analyzed.

The feasibility and technological conditions of the preparation of flame retardant paper based on fiber using co-precipitation synthesis of Mg-Al hydrotalcites as filler in papers were investigated. The crystallizations, granularities of Mg-Al hydrotalcites and characters of flame retardant papers were investigated through transmission election microscope and X-ray diffraction technique etc. The results indicated that Mg-Al hydrotalcites were layered hexagonal nanoparticles, with perfectly crystallized structure and striking performance in furnish retention improvement. The flame retardant papers based on fiber using Mg-Al hydrotalcites as fillers have excellent inflaming retarding performance. The oxygen index of the flame retardant paper produced is above 25 % at the dosage of 15 wt%.

The work presented in this paper aims at developing a tool based on the LCA approach which could be used systematically for the environmental evaluation of Forestry(Pulp) and Paper-making industry,seeking a way to reduce energy consumption, product cost and find the opportunity and way to reduce the pollution load. So it should be controled in every link which is possible to generate radiation in the process from gain of raw material in forestation pulp making and paper making to processing of waste products to prevent and reduce pollution and realize sustainable development of the economic, environmental and human society.

Small motions will result in heavy influence to the production in high-speed paper machine, therefore, decoupling control is necessary. This passage Puts forward the opposite angles strategies to solve the function of decoupling aiming at solving the difficulty that occurs in practice, like the characteristic of hard-coupling and non-linear. According to the mathematics model of the flow box, decoupling the quantity of the two couplings in the processes. Meanwhile, Introduces the SIEMENS S7-300 PLC and the DCS system that is realized by the it.

Effect of wood pulp fiber and filler on the mechanical properties and harmful substance of reconstituted tobacco sheet were investigated. Experiments result showed that added lower lignin content pulp reduced phenols produced by reconstituted tobacco sheet combustion. As addition of bleached hardwood kraft pulp and precipitated calcium carbonate (PCC) increased, the amount of phenols release was dropped dramatically, but in order to ensure the normal operation of papermaking mechine, wood pulp and PCC addition should not be more than 20%. If wood pulp addition was above 20%, it had negative effect on the bulk, carbon monoxide and cigarette smoke flavor of reconstituted tobacco sheet; when PCC addition was more than 20%, it has negative effect on the normal operation of papermaking mechine.

The effect of flotation parameters such as flotation consistency, temperature, flotation time, air to pulp ratio, and turbulence level (velocity of pulp flow) on old book paper deinking efficiency was studied by using a high-consistency laboratory pulper and a laboratory deinking cell. The optimized flotation conditions were: flotation consistency 1.2%, 50°C, 6min, air to pulp ratio 40%, velocity of pulp flow 5.0m/s. By using the optimized flotation conditions, the deinked pulp brightness could reach 77.01%ISO, 9.69%ISO higher than that of the control, the effective residual ink concentration was 175.26 mg/kg, which less than 437.84mg/kg of the control, deinking efficiency was up to 59.97%. After washing process, pulp brightness could reach 84.27%ISO, the effective residual ink concentration was 93.71 mg/kg, deinking efficiency was up to 78.60%.

Combining with the production practice in the particular consortium of the paper mill, power plant and calcium carbonate fines factory, a new kind of united treatment technology is designed. The technology is mixing the waste pulp and waste scum with coal to finish the in-furnace desulphurization, spraying waste water to the flue gas to finished flue gas desulphurization and using waste hydrogen of calcium as absorb material. This method can comprehensive use of resource to reach a better economic effective and social benefit. It reduces the processing cost and avoids city environment pollution. The three factories have mutually pleasant business. The technology opens up a new effective approach of desulphurization and can be good example to the same enterprises. An economical benefit is analyzed.