Search

Two silane-based hybrid coatings were developed to modify the surface energy of phenolic resin impregnated paper. The coated paper samples were further pressed onto surfaces of plywood. The surface properties and water repellence of coated paper were investigated by AFM, XPS and water contact angle measurements. The water absorption of plywood with pressed paper was studied by water uptake tests. It was found that the sol-gel coatings had slightly improved the water repellence of the impregnated paper. The water absorption of plywood was also slightly decreased.

金沢大学融合研究域融合科学系, The purpose of this paper is to present a new predictive control utilizing online data and stored data of input/output of the controlled system. The conventional predictive control methods utilize the mathematical model of the control system to predict an optimal future input to control the system. The model is usually obtained by a standard system identification method from the measured input/output data. The proposed method does not require the mathematical model to predict the optimal future control input to achieve the desired output. This control strategy, called just-in-time, was originally proposed by Inoue and Yamamoto in 2004. In this paper, we proposed a simplified version of the original just-in-time predictive control method. © (2014) Trans Tech Publications, Switzerland., 研究者情報DB

The diffusion coefficient in the metallic glass-forming systems such as Pd-Cu-Ni-P exhibits a marked deviation from the Stokes-Einstein (SE) relation in the proximity of the glass transition temperature. Such a deviation is characterized by the fractional exponent p of the modified SE expression. For the material Pd43Cu27Ni10P20, it has been reported that it takes the value p = 0.75. In this work, it is shown that the value of p is highly correlated with the ratio ED / ENB, where ED and ENB are the activation energies for diffusion coefficient D and cooperativity NB defined by the Bond Strength-Coordination Number Fluctuation (BSCNF) model. The present paper reports that for the metallic glass-forming melt Pd43Cu27Ni10P20, the fractional exponent p can be calculated accurately within the framework of the BSCNF model

Experimental works using a drop weight impact test method have been performed on a circular sheet specimen to evaluate and to characterize the impact resistance of the sheet-type plastic components designed for automotive wheel covers. Evaluation has been conducted for a set of engineering plastics: polycarbonate (PC), acrylonitrile-butadiene-styrene (ABS) and their blend (PC/ABS). The testing results showed that the PC/ABS blend specimens failed in brittle manner under higher impact speeds with very few of whitening zones. Secondary cracks captured perpendicular to fracture surface were also found in the mid-plane of the scattered PC/ABS blend specimens. Investigation is then focused on this blend and the testing results describe that impact resistance of the specimen made of this alternative material is determined by ABS not by PC. Combination of structures between PC and ABS through the thickness in the core due to their immiscibility was observed by scanning electron microscope (SEM) on the etched PC/ABS specimen. This latter result well correlates the results obtained from the testing. It therefore reveals that immiscibility between PC and ABS in the blend plays an important role in determining the impact resistance of the components. This paper also presents simulative results of the test obtained from a FEA work by introducing a 3D- layered finite element (FE) model of the PC/ABS specimen to take into account effect of a layer in the core on the behavior of the blend.

We have been developing an advanced general-purpose computational mechanics system, named ADVENTURE, which is designed to be able to analyze a three dimensional finite element model of arbitrary shape over 100 million Degrees Of Freedom (DOF) mesh. The one of main process modules for solid analysis, named ADVENTURE_Solid, is based the hierarchical domain decomposition parallel algorithm and employs the balancing domain decomposition as a solution technique for linearized equations. The ADVENTURE_Solid has been successfully implemented on a single PC, PC clusters and MPPs with high parallel performances. Since the software has become a quite large system, it is not easy to install or operate the system on parallel machines by users. In this paper, to operate such a system from a client PC through the network, the Web-based CAE system is developed.

International audience; The ACCENT Project (FP7- AAT- 2007- RTD-1) will allow the European Aero Engine manufacturers to improve their competitiveness by applying adaptive control techniques to the manufacturing of their components. For the critical rotating parts of aircraft engines, the surface integrity generated after machining is a key factor on the life cycle. In this context, one particular attention has to be carried out on tool condition. The aim of this paper is to define a monitoring approach able to detect the tool condition and machining disturbances. The main failure modes characterizing this particular Nickel base drilling and the apparition of embedded chips over the machined surface were identified. By experimental techniques, cartography of failure modes was performed. The results show that flank wear and notch are the main failure modes limiting the tool life. For some cutting conditions, the tool failure occurs after the first hole due to the important cutting forces. Some interesting combinations are made between the spindle current/accelerometers/ thrust force and flank wear, tool breakage and notch. Before these correlations, a detailed signal analysis was performed, considering different disturbing phenomena, such as chips evacuation problem. Finally, a "synopsis" for process monitoring is proposed, considering the analyzed phenomena.