Search

Orienting polymer semiconductors is desirable to optimize device characteristics, provide insight into microstructure, and magnify subtle phase behavior. Here, a combination of uniaxial strain and subsequent heating of the donor–acceptor (DA) polymer PBnDT‐FTAZ is discovered to lead to exceptional optical dichroic ratios of up to 38 (and close to 50 near the polymer's absorption edge). This alignment is achieved due to the existence of a previously undetected thermotropic liquid crystal (LC) mesophase. The LC transition, not discernable through calorimetry, is uncovered through a combination of in situ UV–vis spectroscopy, X‐ray scattering, and dynamic mechanical analysis (DMA). Comparing PBnDT‐FTAZ to the non‐fluorinated PBnDT‐HTAZ and the homo polymer PBnDT, all of which show similar thermal transitions, reveals that exceptional alignment is only found in PBnDT‐FTAZ. This is attributed to the PBnDT‐FTAZ film having two distinct liquid crystal populations, and the polymer templating to a highly aligned, high‐clearing temperature population when heated. The DMA thermal relaxation behavior observed here is also seen in other DA conjugated polymers suggesting that such thermotropic LC mesophases may be common in these materials. These findings demonstrate a polymer semiconductor with remarkable alignment and uncover phase behavior with broad implications for process‐structure‐property relationships in polymer semiconductors. [ABSTRACT FROM AUTHOR]

The thermomechanical behavior of polymer semiconductors plays an important role in the processing, morphology, and stability of organic electronic devices. However, donor–acceptor‐based copolymers exhibit complex thermal relaxation behavior that is not well understood. This study uses dynamic mechanical analysis (DMA) to probe thermal relaxations of a systematic set of polymers based around the benzodithiophene (BDT) moiety. The loss tangent curves are resolved by fitting Gaussian functions to assign and distinguish different relaxations. Three prominent transitions are observed that correspond to: i) localized relaxations driven primarily by the side chains (γ), ii) relaxations along the polymer backbone (β), and iii) relaxations associated with aggregates (α). The side chains are found to play a clear role in dictating Tγ, and that mixing the side chain chemistry of the monomer to include alkyl and oligo(ethylene glycol) moieties results in splitting the γ ‐relaxation. The β relaxations are shown to be associated with backbone elements along with the monomer. In addition, through processing, it is shown that the α‐relaxation is due to aggregate formation. Finally, it is demonstrated that the thermal relaxation behavior correlates well with the stress–strain behavior of the polymers, including hysteresis and permanent set in cyclically stretched films. [ABSTRACT FROM AUTHOR]

Photodetectors that can sense not only light intensity but also light's polarization state add valuable information that is beneficial in a wide array of applications. Polymer semiconductors are an attractive material system to achieve intrinsic polarization sensitivity due to their anisotropic optoelectronic properties. In this report, the thermomechanical properties of the polymer semiconductors PBnDT‐FTAZ and P(NDI2OD‐T2) are leveraged to realize bulk heterojunction (BHJ) films with record in‐plane alignment. Two polymer blends with distinct weight average molar masses (Mw) are considered and either a strain‐ or rub‐alignment process is applied to align the polymer blend films. Optimized processing yields films with dichroic ratios (DR) of over 11 for the high Mw system and nearly 17 for the low Mw system. Incorporating the aligned films into photodetectors results in a polarized photocurrent ratio of 15.25 with corresponding anisotropy ratio of 0.88 at a wavelength of 530 nm, representing the highest reported photocurrent ratio for photodiodes that can operate in a self‐powered regime. The demonstrated performance showcases the ability of polymer semiconductors to achieve BHJ films with exceptional in‐plane polymer alignment, enabling high performance polarization sensitive photodetectors for incorporation into novel device architectures. [ABSTRACT FROM AUTHOR]

Intra‐ and intermolecular ordering greatly impacts the electronic and optoelectronic properties of semiconducting polymers. The interrelationship between ordering of alkyl sidechains and conjugated backbones has yet to be fully detailed, despite much prior effort. Here, the discovery of a highly ordered alkyl sidechain phase in six representative semiconducting polymers, determined from distinct spectroscopic and diffraction signatures, is reported. The sidechain ordering exhibits unusually large coherence lengths (≥70 nm), induces torsional/twisting backbone disorder, and results in a vertically multilayered nanostructure with ordered sidechain layers alternating with disordered backbone layers. Calorimetry and in situ variable temperature scattering measurements in a model system poly{4‐(5‐(4,8‐bis(3‐butylnonyl)‐6‐methylbenzo[1,2‐b:4,5‐b′]dithiophen‐2‐yl)thiophen‐2‐yl)‐2‐(2‐butyloctyl)‐5,6‐difluoro‐7‐(5‐methylthiophen‐2‐yl)‐2H‐benzo[d][1,2,3]triazole} (PBnDT‐FTAZ) clearly delineate this competition of ordering that prevents simultaneous long‐range order of both moieties. The long‐range sidechain ordering can be exploited as a transient state to fabricate PBnDT‐FTAZ films with an atypical edge‐on texture and 2.5× improved field‐effect transistor mobility. The observed influence of ordering between the moieties implies that improved molecular design can produce synergistic rather than destructive ordering effects. Given the large sidechain coherence lengths observed, such synergistic ordering should greatly improve the coherence length of backbone ordering and thereby improve electronic and optoelectronic properties such as charge transport and exciton diffusion lengths. A crystalline alkyl sidechain phase with coherence lengths >70 nm is reported in a series of representative semiconducting polymers. This ordering induces backbone disorder, revealing competing forces of the backbone and sidechain that prevent simultaneous ordering of both the constituents. Implications for molecular design that facilitates synergistic long‐range crystallization are discussed. [ABSTRACT FROM AUTHOR]