Search

Organic thermally activated delayed fluorescent (TADF) scintillators hold promising potential for applications in medical radiography and security detection, but the poor X‐ray absorption ability and inferior radioluminescence (RL) hampered their progression. Herein, the study has pioneered the development of high‐performance TADF Ag(I)‐based scintillators from M2X2(dppb)2 (M = Ag, Cu; X = Cl, Br, I) complexes with 1,2‐Bis(diphenylphosphino)benzene (dppb) ligand. In comparison with Cu(I) complexes, the Ag(I) series generally exhibited superior scintillation performance. Notably, Ag2Cl2(dppb)2 (Ag1) stands out with exceptionally high RL intensity (≈125% higher than that of CsI:Tl) and a low detection limit of 59.8 nGy s−1. The outstanding scintillation performance of Ag1 is primarily attributed to the synergistic effect of the high exciton utilization efficiency origin from a small singlet‐triplet energy gap, enhanced X‐ray absorption capacity by heavy atoms, and the high photoluminescence quantum yield (76.47% in ambient atmosphere). By fabricating a flexible film constructed with Ag1 submicron crystalline powders, a high spatial resolution of 25.0 lp mm−1 for X‐ray imaging is obtained. It offers new opportunities for utilizing TADF metal–organic complexes for highly efficient X‐ray scintillation and imaging. [ABSTRACT FROM AUTHOR]

Lead‐free metal halides have recently received sustained attention because of their nontoxicity, low‐cost, as well as excellent stability and optoelectronic properties. However, most of the reported lead‐free metal halides are synthesized via slow solution‐processing at high temperature in toxic solvents, which may impede their commercial applications. Here, a solvent‐free strategy is proposed to synthesize inorganic rubidium copper halides (Rb2CuX3, X = Cl, Br) at room temperature, which exhibit efficient violet emission dominated by a self‐trapped excitons (STEs) mechanism and attractive stabilities against ultraviolet illumination and heating. Thus, Rb2CuX3 powders are employed as emitters and scintillators applied in wireless light communication and X‐ray imaging technologies. Under orthogonal frequency division multiplexing modulation, emitters demonstrate a broad −3 dB bandwidth of 26.3 MHz and a high received data rate of 205.1 Mbps. Additionally, flexible scintillation films based on as‐prepared powders are fabricated and show outstanding X‐ray scintillation properties, including a high spatial resolution of 18.1 lp mm−1 and a low detection limit of 104 nGyair s−1, as well as promising imaging performance for irregular objects. These results suggest large‐scale production of nontoxic Rb2CuX3 and their potential commercialization in fields of high‐speed light communication and X‐ray radiography. [ABSTRACT FROM AUTHOR]

Fast neutron and X‐ray imaging are considered complementary nondestructive detection technologies. However, due to their opposite cross‐sections, development of a scintillator that is sensitive to both fast neutrons and X‐rays within a single‐material framework remains challenging. Herein, an organic–inorganic hybrid perovskite (C4H9NH3)2PbBr4 (BPB) is demonstrated as a scintillator that fully meets the requirements for both fast neutron and X‐ray detection. The hydrogen‐rich organic component acts as a fast neutron converter and produces detectable recoil protons. The heavy atom‐rich inorganic fraction efficiently deposits the energy of charged recoil protons and directly provides a large X‐ray cross‐section. Due to the synergy of these organic and inorganic components, the BPB scintillator exhibits high light yields (86% of the brightness of a commercial ZnS (Ag)/6LiF scintillator for fast neutrons; 22 000 photons per MeV for X‐rays) and fast response times (τdecay = 10.3 ns). More importantly, energy‐selective fast neutron and X‐ray imaging are also demonstrated, with high resolutions of ≈1 lp mm−1 for fast neutrons and 17.3 lp mm−1 for X‐rays; these are among the highest resolution levels for 2D perovskite scintillators. This study highlights the potential of 2D perovskite materials for use in combined fast neutron and X‐ray imaging applications. [ABSTRACT FROM AUTHOR]

Scintillators with high light yield, low detection limit, large X‐ray attenuation efficiency as well as stable and nontoxic compositions are of great importance for radiation detection applications. Here, 0D (C8H20N)2Cu2Br4 single crystals are obtained and show blue emission peaking at 468 nm with a near‐unity photoluminescence quantum yield of 99.7%, a large Stokes shift of 148 nm (i.e., negligible self‐absorption), and a good environmental stability along with strong X‐ray absorption capability. Moreover, a high light yield of up to ≈ 91 300 photons/MeV and a low detection limit of 52.1 nGyair s−1 are realized, which is more than one hundred times lower than the dose rate of 5.5 µGyair s−1 required for X‐ray medical diagnostics. (C8H20N)2Cu2Br4 ceramic wafer scintillation screen is fabricated by a cold pressing sintering process, and the clear contrast images of opaque metal box and electronic component with a spatial resolution of 9.54 lp mm−1 are realized. This study not only designs a new lead‐free metal halide scintillator, but also develops a universal strategy for the preparation of large‐sized scintillator screen in nondestructive X‐ray imaging. [ABSTRACT FROM AUTHOR]

Scintillators with high light yield, low detection limit, large X‐ray attenuation efficiency as well as stable and nontoxic compositions are of great importance for radiation detection applications. Here, 0D (C8H20N)2Cu2Br4 single crystals are obtained and show blue emission peaking at 468 nm with a near‐unity photoluminescence quantum yield of 99.7%, a large Stokes shift of 148 nm (i.e., negligible self‐absorption), and a good environmental stability along with strong X‐ray absorption capability. Moreover, a high light yield of up to ≈ 91 300 photons/MeV and a low detection limit of 52.1 nGyair s−1 are realized, which is more than one hundred times lower than the dose rate of 5.5 µGyair s−1 required for X‐ray medical diagnostics. (C8H20N)2Cu2Br4 ceramic wafer scintillation screen is fabricated by a cold pressing sintering process, and the clear contrast images of opaque metal box and electronic component with a spatial resolution of 9.54 lp mm−1 are realized. This study not only designs a new lead‐free metal halide scintillator, but also develops a universal strategy for the preparation of large‐sized scintillator screen in nondestructive X‐ray imaging. [ABSTRACT FROM AUTHOR]

Halide perovskites are an emerging scintillator material for X‐ray imaging. High‐quality X‐ray imaging generally requires high spatial resolution and long operation lifetime, especially for targeted objects with irregular shapes. Herein, a perovskite "polymer–ceramics" scintillator, in which the halide perovskite nanocrystals are grown inside a pre‐solidified polymer structure with high viscosity (6 × 1012 cP), is designed to construct flexible and refreshable X‐ray imaging. A nucleation inhibition strategy is proposed to prevent the agglomeration and Ostwald ripening of perovskite crystals during the subsequent precipitation process, enabling a high‐quality polymer–ceramics scintillator with high transparency. This scintillator‐based detector achieves a detection limit of 120 nGy s–1 and a spatial resolution of 12.5 lp mm–1. Interestingly, due to the anchoring effect of the exfoliated atoms provided by the polymer matrix, the scintillator film can be refreshed after a long duration (≥3 h) and high dose (8 mGy s–1) irradiation. More importantly, this inherent characteristic overcomes the long operation lifetime issue of perovskites‐based scintillators. Hence, the authors' exploration of the polymer–ceramics scintillator paves the way for the development of flexible and durable perovskite scintillators that can be produced at a low operation cost. [ABSTRACT FROM AUTHOR]

Real‐time in vivo detection of cancer via attenuation‐based plain X‐ray imaging is proposed to fundamentally overcome the penetration depth limits of current fluorescence‐based imaging techniques. Using cesium lead bromide (CsPbBr3, CPB) quantum dot (QD) scintillators, real‐time X‐ray detection of 5 mm‐sized Panc‐1 cell tumors grown in a mouse is successfully performed. The QDs are rapidly co‐synthesized and double‐encapsulated with silicon dioxide (SiO2) to completely prevent them from being aggregated, decomposed, or released; they are then conjugated with antibodies to target pancreatic cancer. Due to the dramatic X‐ray attenuation, the X‐ray signal from the CPB QDs placed under the 2 cm‐thick tissue is clearly observed, while their fluorescence signal is not detected at all. In in vivo mouse experiments, the injection of a tiny amount (2.8 μg on a QD basis) of the CPB–SiO2@SiO2–Ab nanoparticles gives rise to a bright spot at the location of the tumor. Cell viability assay and histological analysis confirm the biocompatibility and nontoxicity of the nanoparticles. [ABSTRACT FROM AUTHOR]

Scintillators for radiation detection are of great significance in medical imaging, security, and nondestructive inspection. The current challenge for scintillators is to simultaneously achieve high scintillation light yield, fast radioluminescence, simple film fabrication, large X‐ray attenuation efficiency as well as stable and nontoxic compositions; no previous scintillators fulfill all the above requirements. Here, metal halide Rb2AgBr3, possessing defect‐bound excitonic radioluminescence, is shown as efficient and fast scintillators. This nontoxic and stable scintillator emits from excitons bound to neutral bromine vacancies, enjoying an efficient and spin‐allowed fast emission with minimized self‐absorption. Rb2AgBr3 thus has a high light yield (25 600 photons MeV−1), fast scintillation decay time (5.31 ns), and a record value of light yield versus decay time (4821 photons MeV−1 ns−1). The close‐space sublimation method is developed for fast and scalable fabrication of oriented Rb2AgBr3 films. The scintillator film is further integrated with commercial flat‐panel imagers, and the spatial resolution reaches 10.2 line pairs per millimeter at the modulation transfer function of 0.2, doubling the resolution of conventional CsI:Tl flat‐panel detectors. The dynamic X‐ray imaging and its use to real‐time monitoring of bone movement without ghosting effect is also demonstrated. [ABSTRACT FROM AUTHOR]