Search

With the rapid increase in the use of optogenetics to investigate the nervous system, there is a high demand for a neural interface that enables 2D mapping of electrophysiological neural signals with high precision during simultaneous light stimulation. Here, a gold nanonetwork (Au NN)‐based transparent neural electrocorticogram (ECoG) monitoring system is proposed as implantable neural electronics. The neural interface enables accurate 2D mapping of ECoG neural signals without any photoelectric artifact during light stimulation. By using the Au NN, not only the transmittance of the microelectrodes is increased by 81% but also a low electrochemical impedance of 33.9 kΩ at 1 kHz with improved mechanical stability is achieved. It is demonstrated that the transparent microelectrode array records multichannel in vivo neural activities with no photoelectric artifact and a high signal‐to‐noise ratio. Propagation of neural dynamics of optically driven neural activities is also clearly visualized using the 2D Au NN microelectrode array. This transparent, flexible ECoG microelectrode array is a promising candidate for next‐generation in vitro and in vivo neural interface for 2D mapping of neural dynamics. [ABSTRACT FROM AUTHOR]

Abstract: With the increasing interest and demand for epidermal electronics, a strong interface between a sensor and a biological surface is essential, yet achieving such interface is still a challenge. Here, a calcium (Ca)‐modified biocompatible silk fibroin as a strong adhesive for epidermal electronics is proposed and the physical principles behind its interfacial and adhesive properties are reported. A strong adhesive characteristic (>800 N m−1) is observed because of the increase in both viscoelastic property and mechanical interlocking through the incorporation of Ca ions. Furthermore, additional key characteristics of the Ca‐modified silk: reusability, stretchability, biocompatibility, and conductivity, are reported. These characteristics enable a wide range of applications as demonstrated in four epidermal electronic systems: capacitive touch sensor, resistive strain sensor, hydrogel‐based drug delivery, and electrocardiogram monitoring sensor. As a reusable, biocompatible, conductive, and strong adhesive with water‐degradability, the Ca‐modified silk adhesive is a promising candidate for the next‐generation adhesive for epidermal biomedical sensors. [ABSTRACT FROM AUTHOR]

Abstract: CsPbX3 (X = halide, Cl, Br, or I) all‐inorganic halide perovskites (IHPs) are regarded as promising functional materials because of their tunable optoelectronic characteristics and superior stability to organic–inorganic hybrid halide perovskites. Herein, nonvolatile resistive switching (RS) memory devices based on all‐inorganic CsPbI3 perovskite are reported. An air‐stable CsPbI3 perovskite film with a thickness of only 200 nm is successfully synthesized on a platinum‐coated silicon substrate using low temperature all‐solution process. The RS memory devices of Ag/polymethylmethacrylate (PMMA)/CsPbI3/Pt/Ti/SiO2/Si structure exhibit reproducible and reliable bipolar switching characteristics with an ultralow operating voltage (<+0.2 V), high on/off ratio (>106), reversible RS by pulse voltage operation (pulse duration < 1 ms), and multilevel data storage. The mechanical flexibility of the CsPbI3 perovskite RS memory device on a flexible substrate is also successfully confirmed. With analyzing the influence of phase transition in CsPbI3 on RS characteristics, a mechanism involving conducting filaments formed by metal cation migration is proposed to explain the RS behavior of the memory device. This study will contribute to the understanding of the intrinsic characteristics of IHPs for low‐voltage resistive switching and demonstrate the huge potential of them for use in low‐power consumption nonvolatile memory devices on next‐generation computing systems. [ABSTRACT FROM AUTHOR]

Neuromorphic computing, which mimics biological neural networks, can overcome the high‐power and large‐throughput problems of current von Neumann computing. Two‐terminal memristors are regarded as promising candidates for artificial synapses, which are the fundamental functional units of neuromorphic computing systems. All‐inorganic CsPbI3 perovskite‐based memristors are feasible to use in resistive switching memory and artificial synapses due to their fast ion migration. However, the ideal perovskite phase α‐CsPbI3 is structurally unstable at ambient temperature and rapidly degrades to a non‐perovskite δ‐CsPbI3 phase. Here, dual‐phase (Cs3Bi2I9)0.4−(CsPbI3)0.6 is successfully fabricated to achieve improved air stability and surface morphology compared to each single phase. Notably, the Ag/polymethylmethacrylate/(Cs3Bi2I9)0.4−(CsPbI3)0.6/Pt device exhibits non‐volatile memory functions with an endurance of ≈103 cycles and retention of ≈104 s with low operation voltages. Moreover, the device successfully emulates synaptic behavior such as long‐term potentiation/depression and spike timing/width‐dependent plasticity. This study will contribute to improving the structural and mechanical stability of all‐inorganic halide perovskites (IHPs) via the formation of dual phase. In addition, it proves the great potential of IHPs for use in low‐power non‐volatile memory devices and electronic synapses. [ABSTRACT FROM AUTHOR]