Search

Lithium–sulfur batteries (LSBs) currently suffer from severe polysulfide shuttling, slow redox kinetics at the sulfur cathode, and irreversible dendrite growth at the lithium anode. To address these issues, a dual interfacial engineering strategy on both the cathode and anode is proposed. For the cathode, iminated polyaniline (iPANI) is used to achieve energetic engineering to induce mid‐energy level to the adsorption of polysulfides, and catalyze the redox conversion of sulfur species, and realize morphological engineering via self‐assembly of iPANI onto a scaffold integrated by reduced graphene oxide (rGO) and carbon nanotubes (CNTs), namely iPANI@rGO‐CNTs. For the anode, the highly conductive and lithiophilic nature and porous nanostructure of the iPANI@rGO‐CNTs composite facilitates the uniform deposition of lithium‐ions, significantly preventing the growth of lithium dendrites. Density functional theory calculations suggest that the iminated functional group at the excited state in iPANI can significantly suppress the shuttling effect, catalyze the conversion of sulfur species, and enhance the conversion of the sulfur species on the sulfur cathode. With the synergic effects of the iPANI@rGO‐CNTs nanoreactors, the as‐prepared LSBs deliver an excellent rate capability and outstanding cycling life. This large‐scale production and application of the iPANI@rGO‐CNTs nanocomposite may lead to the eventual commercialization of LSBs. [ABSTRACT FROM AUTHOR]

Lithium metal is considered as an ideal substitute to low‐capacity carbon anodes for rechargeable lithium‐ion batteries (LIBs) given its ultra‐high theoretical specific capacity of 3860 mAh g−1 and the lowest electrochemical potential. However, safety issues stem from the uncontrollable formation and growth of lithium dendrites, which severely plague the practical application of the Li anode. Here, a multi‐functional protection layer, prepared by a one‐step spin‐coating of CuCl2N‐Methyl‐2‐Pyrrolidone (NMP) solution on a lithium metal surface is constructed. The as‐prepared protective layer has a variable porous morphology that consists of a conductive lithium‐copper alloy and electrochemically active CuCl, which proactively facilitates the homogeneous diffusion of Li‐ions, the elimination of random dendrite nuclei, and even distribution of charge at the Li anode surface, and subsequently the uniform deposition of Li+ ions. Under such a dynamic protection mechanism, the proposed CuCl2 modified Li electrode can stably cycle more than 1500 h at a current density of 1 mA cm−2 paired with lithium foil. Moreover, the assembled full battery achieves capacity retention of 85.6% even after 2000 cycles at a high rate of 5 C with a LiFePO4 cathode. This as‐proposed dynamic protection mechanism via the incorporation of the electrochemically active component could provide new guidance in the preparation of the safe and high‐performance lithium metal anodes. [ABSTRACT FROM AUTHOR]

Keywords: CuCl redox reaction; dynamic protection mechanisms; Li/Cu alloys; lithium anode protection; lithium dendrites EN CuCl redox reaction dynamic protection mechanisms Li/Cu alloys lithium anode protection lithium dendrites 1 1 1 04/25/22 20220421 NES 220421 B Lithium Anode Protection b In article number 2103480, Chao Lai, Shanqing Zhang and co-workers develop a porous protective layer that consists of a conductive Li-Cu alloy and electrochemically active CuCl on the surface of a lithium anode that evolves with the cycling process and ensures a homogeneous distribution of charge on the lithium anode surface, and subsequently, facilitates the uniform diffusion and deposition of Li SP + sp ions. CuCl2-Modified Lithium Metal Anode via Dynamic Protection Mechanisms for Dendrite-Free Long-Life Charging/Discharge Processes (Adv. CuCl redox reaction, dynamic protection mechanisms, Li/Cu alloys, lithium anode protection, lithium dendrites. [Extracted from the article]