Search

Abstract: A series of narrow bandgap electron acceptors is designed and synthesized for efficient near‐infrared (NIR) organic solar cells. Extending π‐conjugation of donor frameworks leads to an intense intramolecular charge transfer, resulting in broad absorption profiles with band edge reaching 950 nm. When blended with an electron donor polymer PTB7‐Th, IOTIC‐2F exhibits efficient charge transfer even with a small energetic offset, so as to achieve a large photogenerated current over 22 mA cm−2 with small energy losses (≈0.49 eV) in solar cell devices. With an intense NIR absorbance, PTB7‐Th:IOTIC‐2F‐based cells achieve a power conversion efficiency of 12.1% with good visible transparency (52% transmittance from 370 to 740 nm). Analysis of film morphology reveals that processing with solvent additives enhances crystalline features of acceptor components, while keeping an appropriate level of donor:acceptor intermixing in the binary blends. The incorporation of the third component, ITIC‐2F, into the PTB7‐Th:IOTIC‐2F blends increases the device efficiency up to 12.9%. The improvement is assigned to the cascaded energy‐level structure and desirable nanoscale phase separation of the ternary blends, which is beneficial to the photocurrent generation. This work provides an efficient molecular design strategy to optimize nonfullerene acceptor properties for efficient NIR organic photovoltaics. [ABSTRACT FROM AUTHOR]

Abstract: Two narrow bandgap non‐fullerene acceptors (NBG‐NFAs), namely, COTIC‐4F and SiOTIC‐4F, are designed and synthesized for the fabrication of efficient near‐infrared organic solar cells (OSCs). The chemical structures of the NBG‐NFAs contain a D′‐D‐D′ electron‐rich internal core based on a cyclopentadithiophene (or dithienosilole) (D) and alkoxythienyl (D′) core, end‐capped with the highly electron‐deficient unit 2‐(5,6‐difluoro‐3‐oxo‐2,3‐dihydro‐1H‐inden‐1‐ylidene)malononitrile (A), ultimately providing a A‐D′‐D‐D′‐A molecular configuration that enhances the intramolecular charge transfer characteristics of the excited states. One can thereby reduce the optical bandgap (Egopt) to as low as ≈1.10 eV, one of the smallest values for NFAs reported to date. In bulk‐heterojunction (BHJ) OSCs, NBG‐NFA blends with the polymer donor PTB7‐Th yield power conversion efficiencies (PCE) of up to 9.0%, which is particularly high when compared against a range of NBG BHJ blends. Most significantly, it is found that, despite the small energy loss (Egopt − eVOC) of 0.52 eV, the PTB7‐Th/NBG‐NFA bulk heterojunction blends can yield short‐circuit current densities of up to 22.8 mA cm−2, suggesting that the design and application of NBG‐NFA materials have substantial potential to further improve the PCE of OSCs. [ABSTRACT FROM AUTHOR]

A series of four polymers containing benzo[1,2-b:4,5-b′]dithiophene (BDT) and 5,6-difluoro-4,7-diiodobenzo[c][1,2,5]thiadiazole (2FBT), PBDT2FBT, PBDT2FBT-O, PBDT2FBT-T, and PBDT2FBT-T-O, are synthesized with their four different side chains, alkyl-, alkoxy-, alkylthienyl-, and alkoxythienyl. Experimental results and theoretical calculations show that the molecular tuning of the side chains simultaneously influences the solubilities, energy levels, light absorption, surface tension, and intermolecular packing of the resulting polymers by altering their molecular coplanarity and electron affinity. The polymer solar cell (PSC) based on a blend of PBDT2FBT-T/[6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) exhibits the best photovoltaic performance of the four PBDT2FBT derivatives, with a high open-circuit voltage of 0.98 V and a power conversion efficiency of 6.37%, without any processing additives, post-treatments, or optical spacers. Furthermore, PBDT2FBT-T-O, which has a novel side chain alkoxythienyl, showed promising properties with the most red-shifted absorption and strong intermolecular packing property in solid state. This study provides insight into molecular design and fabrication strategies via structural tuning of the side chains of conjugated polymers for achieving highly efficient PSCs. [ABSTRACT FROM AUTHOR]

The short‐circuit current (Jsc) of organic solar cells is defined by the interplay of exciton photogeneration in the active layer, geminate and non‐geminate recombination losses and free charge carrier extraction. The method proposed in this work allows the quantification of geminate recombination and the determination of the mobility‐lifetime product (µτ) as a single integrated parameter for charge transport and non‐geminate recombination. Furthermore, the extraction efficiency is quantified based on the obtained µτ product. Only readily available experimental methods (current‐voltage characteristics, external quantum efficiency measurements) are employed, which are coupled with an optical transfer matrix method simulation. The required optical properties of common organic photovoltaic (OPV) materials are provided in this work. The new approach is applied to three OPV systems in inverted or conventional device structures, and the results are juxtaposed against the µτ values obtained by an independent method based on the voltage–capacitance spectroscopy technique. Furthermore, it is demonstrated that the new method can accurately predict the optimal active layer thickness. [ABSTRACT FROM AUTHOR]

The short‐circuit current (Jsc) of organic solar cells is defined by the interplay of exciton photogeneration in the active layer, geminate and non‐geminate recombination losses and free charge carrier extraction. The method proposed in this work allows the quantification of geminate recombination and the determination of the mobility‐lifetime product (µτ) as a single integrated parameter for charge transport and non‐geminate recombination. Furthermore, the extraction efficiency is quantified based on the obtained µτ product. Only readily available experimental methods (current‐voltage characteristics, external quantum efficiency measurements) are employed, which are coupled with an optical transfer matrix method simulation. The required optical properties of common organic photovoltaic (OPV) materials are provided in this work. The new approach is applied to three OPV systems in inverted or conventional device structures, and the results are juxtaposed against the µτ values obtained by an independent method based on the voltage–capacitance spectroscopy technique. Furthermore, it is demonstrated that the new method can accurately predict the optimal active layer thickness. [ABSTRACT FROM AUTHOR]

Structural optimization of the side chains of conjugated polymers is essential for highly efficient organic solar cells. In article number 1400087, Kilwon Cho and co‐workers describe the importance of side chains by investigating polymer solar cells based on PBDT2FBT low‐bandgap polymers containing four types of side chains. The effects of the side chains on the optoelectronic and morphological properties of the bulk‐heterojunction photoactive layer are explored and found to be strongly correlated with the power conversion efficiency of the organic photovoltaic devices. [ABSTRACT FROM AUTHOR]

Understanding structure–function relationships enables the design of materials with tailored functionalities. The long‐standing challenge is to design materials with high active volume to improve efficiency. Tailored grain boundaries and lattice defects are traditionally used to tune the electronic structure near interfaces or defects to promote electron and hole separation. However, the active volume of point defect sites or interfaces in these traditional photocatalysts is extremely low. This study reports a structure with continuous atomic positional deformation across the bulk, altering the electronic structure in 3D and creating a significantly higher active volume. Such a structure in anatase is obtained and tuned by phase transformation during the heating process. Transmission electron microscopy and density functional theory results reveal that atomic deformations result in continuous band bending across the particles, facilitating electron–hole separation, inhibiting their recombination, and inducing dramatically enhanced photoactivity. These findings enable a different materials design paradigm that can potentially be harnessed for a broad range of applications. [ABSTRACT FROM AUTHOR]

The relationship of the temperature–light intensity dependence of open‐circuit voltage Voc in nonfullerene‐based organic solar cells with their material characteristics and multimechanism recombination parameters is described. The systematic variation of the effective bandgap Eg,eff and the electrode layers allows the observation of different relative contributions of bimolecular, bulk, and surface trap‐assisted recombination mechanisms. The complementary advantages of the analytical model and the established voltage‐impedance spectroscopy technique provide a useful tool to quantify multimechanism recombination parameters, effective density of states Nc, and energetic disorder σ in organic solar cells under operating conditions. The validity of the proposed model to understand the temperature and light intensity dependent of Voc is shown by applying it to four different donor:nonfullerene acceptor blend systems with conventional or inverted device architectures. [ABSTRACT FROM AUTHOR]

Even though significant breakthroughs with over 18% power conversion efficiencies (PCEs) in polymer:non‐fullerene acceptor (NFA) bulk heterojunction organic solar cells (OSCs) have been achieved, not many studies have focused on acquiring a comprehensive understanding of the underlying mechanisms governing these systems. This is because it can be challenging to delineate device photophysics in polymer:NFA blends comprehensively, and even more complicated to trace the origins of the differences in device photophysics to the subtle differences in energetics and morphology. Here, a systematic study of a series of polymer:NFA blends is conducted to unify and correlate the cumulative effects of i) voltage losses, ii) charge generation efficiencies, iii) non‐geminate recombination and extraction dynamics, and iv) nuanced morphological differences with device performances. Most importantly, a deconvolution of the major loss processes in polymer:NFA blends and their connections to the complex BHJ morphology and energetics are established. An extension to advanced morphological techniques, such as solid‐state NMR (for atomic level insights on the local ordering and donor:acceptor ππ interactions) and resonant soft X‐ray scattering (for donor and acceptor interfacial area and domain spacings), provide detailed insights on how efficient charge generation, transport, and extraction processes can outweigh increased voltage losses to yield high PCEs. [ABSTRACT FROM AUTHOR]

Interfacial energetics determines the performance of organic photovoltaic (OPV) cells based on a thin film of organic semiconductor blends. Here, an approach to modulating the 'carrier selectivity' at the charge collecting interfaces and the consequent variations in the nongeminate charge carrier recombination dynamics in OPV devices are demonstrated. A ferroelectric blend interfacial layer composed of a solution-processable ferroelectric poly­mer and a wide bandgap semiconductor is introduced as a tunable electron selective layer in inverted OPV devices with non-Ohmic contact electrodes. The direct rendering of dipole alignment within the ferroelectric blend layer is found to increase the carrier selectivity of the charge collecting interfaces up to two orders of magnitude. Transient photovoltaic analyses reveal that the increase of carrier selectivity significantly reduces the diffusion and recombination among minority carriers in the vicinity of the electrodes, giving rise to the 85% increased charge carrier lifetime. Furthermore, the carrier-selective charge extraction leads to the constitution of the internal potential within the devices, even with energetically identical cathodes and anodes. With these carrier-selectivity-controlled interlayers, the devices based on various photoactive materials commonly display significant increments in the device performances, especially with the high fill factor of up to 0.76 under optimized conditions. [ABSTRACT FROM AUTHOR]

Atomic Gradient Structures: Atomic Gradient Structure Alters Electronic Structure in 3D across the Bulk and Enhances Photoactivity (Adv. Keywords: 3D electric fields; atomic gradient structures; high active volume; photoactivity; TiO2 EN 3D electric fields atomic gradient structures high active volume photoactivity TiO2 1 1 1 04/10/21 20210408 NES 210408 In article number 2003548, Peter V. Sushko, Dongsheng Li and co-workers report an atomic defect-free gradient structure that extends across the bulk of anatase crystals, creating a 3D internal electric field that enables an up to 100% fraction of photo-active volume, and leads to anomalously efficient electron-hole separation across the bulk material and thus, substantially higher photoactivity than standard anatase crystals. 3D electric fields, atomic gradient structures, high active volume, photoactivity, TiO2. [Extracted from the article]

In this study, a comprehensive analytical model to quantify the total nongeminate recombination losses, originating from bimolecular as well as bulk and surface trap‐assisted recombination mechanisms in nonfullerene‐based bulk heterojunction organic solar cells is developed. This proposed model is successfully employed to obtain the different contributions to the recombination current of the investigated solar cells under different illumination intensities. Additionally, the model quantitatively describes the experimentally measured open‐circuit voltage versus light intensity dependence. Most importantly, it is possible to calculate the experimental results with the same fitting parameter values from the presented model. The validity of this model is also proven by a combination of other independent, steady‐state, and transient experimental techniques. This new powerful analytical tool will enable researchers in the photovoltaic community to take into account the synergetic contribution from all relevant types of nongeminate recombination losses in different optoelectronic systems and target their analysis of recombination dynamics at any operating voltage. [ABSTRACT FROM AUTHOR]

In article number 1500802, Kilwon Cho and co‐workers report charge‐carrier‐selective extraction through ferroelectric‐semiconductor hybrid interlayers in organic solar cells. The electrically polarized ferroelectric domains provide directional charge carrier extraction even with non‐Ohmic cathodes, thereby significantly reducing non‐geminate charge carrier recombination within the organic solar cells. [ABSTRACT FROM AUTHOR]