Search

Recharging battery‐powered electric vehicles (EVs) in a similar timeframe as those used for refueling gas‐powered internal combustion vehicles is highly desirable for rapid penetration of the EV market. It is well known that the electrolyte in a battery plays a critical role in fast‐charging capability of the battery because it determines the rate of ion transport together with its derived electrode/electrolyte interphases on both cathode and anode of the battery. In this study, the effects of contents of salt, coordinating solvent, and noncoordinating diluent on salt dissociation degree and electrolyte ionic conductivity are investigated, and a controlled solvation structure electrolyte is developed to improve the lithium ion mobility and conductivity in the electrolyte and to enhance the kinetics and stability of the electrode/electrolyte interphases in the battery. This electrolyte enables fast‐charging capability of high energy density lithium‐ion batteries (LIBs) at up to 5 C rate (12‐min charging), which significantly outperforms the state‐of‐the‐art electrolyte. The controlled solvation structure sheds light on the future electrolyte design for fast‐charging LIBs. [ABSTRACT FROM AUTHOR]

Due to the limited oxidation stability (<4 V) of ether oxygen in its polymer structure, polyethylene oxide (PEO)‐based polymer electrolytes are not compatible with high‐voltage (>4 V) cathodes, thus hinder further increases in the energy density of lithium (Li) metal batteries (LMBs). Here, a new type of polymer‐in‐"quasi‐ionic liquid" electrolyte is designed, which reduces the electron density on ethereal oxygens in PEO and ether solvent molecules, induces the formation of stable interfacial layers on both surfaces of the LiNi1/3Mn1/3Co1/3O2 (NMC) cathode and the Li metal anode in Li||NMC batteries, and results in a capacity retention of 88.4%, 86.7%, and 79.2% after 300 cycles with a charge cutoff voltage of 4.2, 4.3, and 4.4 V for the LMBs, respectively. Therefore, the use of "quasi‐ionic liquids" is a promising approach to design new polymer electrolytes for high‐voltage and high‐specific‐energy LMBs. [ABSTRACT FROM AUTHOR]