Search

Molybdenum trioxide (MoO3) has recently aroused intensive interest as a renowned conversion‐type anode of Li‐ion batteries (LIBs). Nevertheless, the inferior rate capability, sluggish reaction kinetics, and fast capacity decay during a long‐term charge/discharge process seriously inhibits large‐scale commercial application. Herein, abundant oxygen vacancies and MXene nanosheets are elaborately introduced into MoO3 nanobelts through hydrazine reduction and electrostatic assembly to accelerate the ionic and electronic diffusion/transport kinetics for LIBs. Benefitting from the accelerated ion diffusion kinetics, enhanced electrical conductivity, and additional active sites induced by oxygen vacancies as well as the robust interfacial contact, the prepared MoO3−x/MXene heterostructure exhibits excellent lithium‐ion storage performances. First‐principles calculations indicate that the adsorption of Li+ ion and the electrical conductivity are significantly enhanced for the MoO3−x/MXene heterostructure. Thus, the composite exhibits high reversible capacity of 1258 mAh g−1 at 0.1 A g−1 for Li‐ion storage and retains 474 mAh g−1 at 10 A g−1, remarkably higher than those of the previously reported MoO3‐based anode materials. More importantly, the composite is fabricated with commercial LiFePO4 into a full LIB, which displays an unparalleled energy density of 330 Wh kg−1. [ABSTRACT FROM AUTHOR]

Developing advanced supercapacitors with both high areal and volumetric energy densities remains challenging. In this work, self‐supported, compact carbon composite electrodes are designed with tunable thickness using 3D printing technology for high‐energy‐density supercapacitors. The 3D carbon composite electrodes are composed of the closely stacked and aligned active carbon/carbon nanotube/reduced graphene oxide (AC/CNT/rGO) composite filaments. The AC microparticles are uniformly embedded in the wrinkled CNT/rGO conductive networks without using polymer binders, which contributes to the formation of abundant open and hierarchical pores. The 3D‐printed ultrathick AC/CNT/rGO composite electrode (ten layers) features high areal and volumetric mass loadings of 56.9 mg cm−2 and 256.3 mg cm−3, respectively. The symmetric cell assembled with the 3D‐printed thin GO separator and ultrathick AC/CNT/rGO electrodes can possess both high areal and volumetric capacitances of 4.56 F cm−2 and 10.28 F cm−3, respectively. Correspondingly, the assembled ultrathick and compact symmetric cell achieves high areal and volumetric energy densities of 0.63 mWh cm−2 and 1.43 mWh cm−3, respectively. The all‐component extrusion‐based 3D printing offers a promising strategy for the fabrication of multiscale and multidimensional structures of various high‐energy‐density electrochemical energy storage devices. The all‐graphene‐oxide (GO)‐based symmetric supercapacitor is assembled with a thin GO separator and compact active carbon/carbon nanotube/reduced graphene oxide composite electrodes with tunable thickness, which are fabricated using the advanced extrusion‐based 3D printing technology. The 3D‐printed ultrathick and compact symmetric supercapacitor with a high mass loading can achieve both high areal and volumetric energy densities. [ABSTRACT FROM AUTHOR]