Search

The conventional electrolyte of 1 m lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) in dimethyl sulfoxide (DMSO) is unstable against the Li metal anode and therefore cannot be used directly in practical Li-O2 batteries. Here, we demonstrate that a highly concentrated electrolyte based on LiTFSI in DMSO (with a molar ratio of 1:3) can greatly improve the stability of the Li metal anode against DMSO and significantly improve the cycling stability of Li-O2 batteries. This highly concentrated electrolyte contains no free DMSO solvent molecules, but only complexes of (TFSI−) aLi+(DMSO) b (where a + b = 4), and thus enhances their stability with Li metal anodes. In addition, such salt-solvent complexes have higher Gibbs activation energy barriers than the free DMSO solvent molecules, indicating improved stability of the electrolyte against the attack of superoxide radical anions. Therefore, the stability of this highly concentrated electrolyte at both Li metal anodes and carbon-based air electrodes has been greatly enhanced, resulting in improved cycling performance of Li-O2 batteries. The fundamental stability of the electrolyte in the absence of free-solvent against the chemical and electrochemical reactions can also be used to enhance the stability of other electrochemical systems. [ABSTRACT FROM AUTHOR]

Recharging battery‐powered electric vehicles (EVs) in a similar timeframe as those used for refueling gas‐powered internal combustion vehicles is highly desirable for rapid penetration of the EV market. It is well known that the electrolyte in a battery plays a critical role in fast‐charging capability of the battery because it determines the rate of ion transport together with its derived electrode/electrolyte interphases on both cathode and anode of the battery. In this study, the effects of contents of salt, coordinating solvent, and noncoordinating diluent on salt dissociation degree and electrolyte ionic conductivity are investigated, and a controlled solvation structure electrolyte is developed to improve the lithium ion mobility and conductivity in the electrolyte and to enhance the kinetics and stability of the electrode/electrolyte interphases in the battery. This electrolyte enables fast‐charging capability of high energy density lithium‐ion batteries (LIBs) at up to 5 C rate (12‐min charging), which significantly outperforms the state‐of‐the‐art electrolyte. The controlled solvation structure sheds light on the future electrolyte design for fast‐charging LIBs. [ABSTRACT FROM AUTHOR]

It has been widely assumed that the flammability of the liquid electrolyte is one of the most influential factors that determine the safety of lithium‐ion batteries (LIBs). Following this consideration, a completely nonflammable electrolyte is designed and adopted for graphite||LiFePO4 (Gr||LFP) batteries. Contrary to the conventional understanding, the completely nonflammable electrolyte with phosphorus‐containing solvents exhibits inferior safety performance in commercial Gr||LFP batteries, in comparison to the flammable conventional LiPF6‐organocarbonate electrolyte. Mechanistic studies identify the exothermic reactions between the electrolyte (especially the salt LiFSI) and the charged electrodes as the "culprit" behind this counterintuitive phenomenon. The discovery emphasizes the importance of reducing the electrolyte reactivity when designing safe electrolytes, as well as the necessity of evaluating safety performance of electrolytes on a battery level. [ABSTRACT FROM AUTHOR]

In article number 1602605, a new approach to enhance the cycling stability of Li‐O2 batteries with dimethyl sulfoxide (DMSO) based electrolyte is developed by Wu Xu, Ji‐Guang Zhang, and co‐workers. It is found that the LiTFSI‐3DMSO electrolyte exhibits an optimal concentration in which only most stable TFSI−–Li+–(DMSO)3 complexes exist but Li+–(DMSO)4 solvates and free DMSO solvent molecules are absent. This electrolyte significantly enhances the stability of both Li metal anodes and carbon‐based airelectrode. The finding on the fundamental stability of the electrolyte in the absence of free‐solvent against the chemical and electrochemical reactions can also be used to enhance the stability of other electrochemical systems. [ABSTRACT FROM AUTHOR]

Lithium metal batteries (LMBs) are one of the most promising candidates for next‐generation high‐energy‐density rechargeable batteries. Solid electrolyte interphase (SEI) on Li metal anodes plays a significant role in influencing the Li deposition morphology and the cycle life of LMBs. However, a thorough understanding on the mechanisms of SEI formation and evolution is still inadequate. In this review, the progress in understanding structures, properties, and influencing factors of SEI, as well as efficient strategies of tailoring SEI are focused upon. First, the compositions, models, and recent progress in characterizing atomic structures of SEI are summarized. Second, the properties of SEI, including electronic conduction, ionic conduction, stability, and mechanical properties are elucidated. Structures and properties of SEI are greatly affected by multiple factors, thus interactions between these factors and SEI are systematically discussed. Correlations of SEI with Li deposition morphology, rate capability, and cycle life are further summarized. Moreover, efficient strategies of tailoring SEI with desired properties, including in situ SEI and ex situ SEI, are also reviewed. Finally, future directions, including in‐operando techniques, multi‐modality approaches for characterization of SEI, and artificial intelligence assisted understanding of correlations between electrolyte components and SEI properties are proposed. [ABSTRACT FROM AUTHOR]

LiNixMnyCo1−x−yO2 (NMC) cathode materials with Ni ≥ 0.8 have attracted great interest for high energy‐density lithium‐ion batteries (LIBs) but their practical applications under high charge voltages (e.g., 4.4 V and above) still face significant challenges due to severe capacity fading by the unstable cathode/electrolyte interface. Here, an advanced electrolyte is developed that has a high oxidation potential over 4.9 V and enables NMC811‐based LIBs to achieve excellent cycling stability in 2.5–4.4 V at room temperature and 60 °C, good rate capabilities under fast charging and discharging up to 3C rate (1C = 2.8 mA cm−2), and superior low‐temperature discharge performance down to −30 °C with a capacity retention of 85.6% at C/5 rate. It is also demonstrated that the electrode/electrolyte interfaces, not the electrolyte conductivity and viscosity, govern the LIB performance. This work sheds light on a very promising strategy to develop new electrolytes for fast‐charging high‐energy LIBs in a wide‐temperature range. [ABSTRACT FROM AUTHOR]

Abstract: The instability of lithium (Li) metal anodes due to dendritic growth and low Coulombic efficiency (CE) hinders the practical application of high‐energy‐density Li metal batteries. Here, the systematic studies of improving the stability of Li metal anodes and the electrochemical performance of Li metal batteries through the addition of combinational additives and the optimization of solvent compositions in dual‐salt/carbonate electrolytes are reported. A dendrite‐free and high CE of 98.1% for Li metal anode is achieved. The well‐protected Li metal anode and the excellent cyclability and rate capability of the 4‐V Li metal batteries are obtained. This is attributed to the formation of a robust, denser, more polymeric, and higher ionic conductive surface film on the Li metal anode via the electrochemical reductive decompositions of the electrolyte components and the ring‐opening polymerization of additives and cyclic carbonate solvents. The key findings of this work indicate that the optimization of solvent compositions and the manipulation of additives are facile and effective ways to enhance the performances of Li metal batteries. [ABSTRACT FROM AUTHOR]

Abstract: Lithium (Li) metal is an ideal anode material for high energy density batteries. However, the low Coulombic efficiency (CE) and the formation of dendrites during repeated plating and stripping processes have hindered its applications in rechargeable Li metal batteries. The accurate measurement of Li CE is a critical factor to predict the cycle life of Li metal batteries, but the measurement of Li CE is affected by various factors that often lead to conflicting values reported in the literature. Here, several parameters that affect the measurement of Li CE are investigated and a more accurate method of determining Li CE is proposed. It is also found that the capacity used for cycling greatly affects the stabilization cycles and the average CE. A higher cycling capacity leads to faster stabilization of Li anode and a higher average CE. With a proper operating protocol, the average Li CE can be increased from 99.0% to 99.5% at a high capacity of 6 mA h cm−2 (which is suitable for practical applications) when a high‐concentration ether‐based electrolyte is used. [ABSTRACT FROM AUTHOR]

Electrolytes: Advanced Electrolytes for Fast-Charging High-Voltage Lithium-Ion Batteries in Wide-Temperature Range (Adv. Keywords: high-Ni layered cathodes; lithium ion batteries; localized high-concentration electrolytes EN high-Ni layered cathodes lithium ion batteries localized high-concentration electrolytes 1 1 1 06/11/20 20200609 NES 200609 In article number 2000368, Wu Xu and co-workers report the fabrication of an advanced localized high-concentration electrolyte with a high oxidation potential over 4.9 V. This electrolyte enables formation of ultrathin, uniform, robust and conductive electrode/electrolyte interphases on both graphite anodes and Ni-rich cathodes. High-Ni layered cathodes, lithium ion batteries, localized high-concentration electrolytes. [Extracted from the article]

Due to the limited oxidation stability (<4 V) of ether oxygen in its polymer structure, polyethylene oxide (PEO)‐based polymer electrolytes are not compatible with high‐voltage (>4 V) cathodes, thus hinder further increases in the energy density of lithium (Li) metal batteries (LMBs). Here, a new type of polymer‐in‐"quasi‐ionic liquid" electrolyte is designed, which reduces the electron density on ethereal oxygens in PEO and ether solvent molecules, induces the formation of stable interfacial layers on both surfaces of the LiNi1/3Mn1/3Co1/3O2 (NMC) cathode and the Li metal anode in Li||NMC batteries, and results in a capacity retention of 88.4%, 86.7%, and 79.2% after 300 cycles with a charge cutoff voltage of 4.2, 4.3, and 4.4 V for the LMBs, respectively. Therefore, the use of "quasi‐ionic liquids" is a promising approach to design new polymer electrolytes for high‐voltage and high‐specific‐energy LMBs. [ABSTRACT FROM AUTHOR]

Silicon anodes are regarded as one of the most promising alternatives to graphite for high energy‐density lithium‐ion batteries (LIBs), but their practical applications have been hindered by high volume change, limited cycle life, and safety concerns. In this work, nonflammable localized high‐concentration electrolytes (LHCEs) are developed for Si‐based anodes. The LHCEs enable the Si anodes with significantly enhanced electrochemical performances comparing to conventional carbonate electrolytes with a high content of fluoroethylene carbonate (FEC). The LHCE with only 1.2 wt% FEC can further improve the long‐term cycling stability of Si‐based anodes. When coupled with a LiNi0.3Mn0.3Co0.3O2 cathode, the full cells using this nonflammable LHCE can maintain >90% capacity after 600 cycles at C/2 rate, demonstrating excellent rate capability and cycling stability at elevated temperatures and high loadings. This work casts new insights in electrolyte development from the perspective of in situ Si/electrolyte interphase protection for high energy‐density LIBs with Si anodes. [ABSTRACT FROM AUTHOR]

In article number 1502151, Ji‐Guang Zhang, Wu Xu, and co‐workers present the formation of a transient high‐concentration electrolyte layer on the Li anode surface during a fast stripping process. The highly concentrated Li+ ions immediately coordinate with available solvent molecules and facilitate the formation of a stabilized solid electrolyte interphase on the Li surface, thus effectively mitigating Li corrosion and enabling the sustainable operation of Li metal batteries. [ABSTRACT FROM AUTHOR]