Search

Despite being the major cause of safety and performance issues in lithium metal batteries, experimental difficulties in quantifying directly the morphology of lithium deposited at electrode surfaces have meant that the mechanism of metallic lithium growth within batteries remains elusive. This study demonstrates that quantitative detail about the morphology of metallic lithium within batteries can be derived non‐destructively and directly using in situ ultra‐small and small‐angle neutron scattering. This information is obtained over a large electrode area in cells where lithium deposition processes are typical of real‐world applications. Complex variations of surface area and interfacial distances 1–10 µm and 100–300 nm are revealed in size that are influenced by current density and cell cycling history, providing valuable insight into the growth of metallic lithium features detrimental to battery performance. Such quantitative insight into the process of lithium growth is required for the development of safer high‐performance lithium metal batteries. [ABSTRACT FROM AUTHOR]

Li‐rich layered oxides (LLOs) can deliver almost double the capacity of conventional electrode materials such as LiCoO2 and LiMn2O4; however, voltage fade and capacity degradation are major obstacles to the practical implementation of LLOs in high‐energy lithium‐ion batteries. Herein, hexagonal La0.8Sr0.2MnO3−y (LSM) is used as a protective and phase‐compatible surface layer to stabilize the Li‐rich layered Li1.2Ni0.13Co0.13Mn0.54O2 (LM) cathode material. The LSM is MnOM bonded at the LSM/LM interface and functions by preventing the migration of metal ions in the LM associated with capacity degradation as well as enhancing the electrical transfer and ionic conductivity at the interface. The LSM‐coated LM delivers an enhanced reversible capacity of 202 mAh g−1 at 1 C (260 mA g−1) with excellent cycling stability and rate capability (94% capacity retention after 200 cycles and 144 mAh g−1 at 5 C). This work demonstrates that interfacial bonding between coating and bulk material is a successful strategy for the modification of LLO electrodes for the next‐generation of high‐energy Li‐ion batteries. [ABSTRACT FROM AUTHOR]

Potassium‐ion batteries (PIBs) are an emerging, affordable, and environmentally friendly alternative to lithium‐ion batteries, with their further development driven by the need for suitably performing electrode materials capable of reversibly accommodating the relatively large K+. Layer‐structured manganese oxides are attractive as electrodes for PIBs, but suffer from structural instability and sluggish kinetics of K+ insertion/extraction, leading to poor rate capability. Herein, cobalt is successfully introduced at the manganese site in the KxMnO2 layered oxide electrode material and it is shown that with only 5% Co, the reversible capacity increases by 30% at 22 mA g‐1 and by 92% at 440 mA g‐1. In operando synchrotron X‐ray diffraction reveals that Co suppresses Jahn–Teller distortion, leading to more isotropic migration pathways for K+ in the interlayer, thus enhancing the ionic diffusion and consequently, rate capability. The detailed analysis reveals that additional phase transitions and larger volume change occur in the Co‐doped material as a result of layer gliding, with these associated with faster capacity decay, despite the overall capacity remaining higher than the pristine material, even after 500 cycles. These results assert the importance of understanding the detailed structural evolution that underpins performance that will inform the strategic design of electrode materials for high‐performance PIBs. [ABSTRACT FROM AUTHOR]