Search

The emerging tribovoltaic nanogenerators (TVNGs) has garnered considerable attention in recent years owing to its higher power density, but it is still limited by unstable output, mismatched impedance, and lower charging speed. Herein, a power‐managed GaN‐based TVNG is first proposed and a self‐powered wireless temperature monitoring system (SWTMS) is developed. The energy backflow from transition capacitor to TVNG is effectively suppressed by applying a high‐voltage‐resistant diode. Benefiting from the combination of the maximum power point tracking (MPPT and the buck converter, an autonomous power management unit (PMU) is designed. The internal impedance of TVNG with PMU decreases by ten times and the charging speed of capacitor increases by 7.18 times compared to those without PMU. Moreover, 100 LEDs and six parallel thermohygrometers can be constantly powered. The wireless temperature monitoring in industrial environments without external power supply is demonstrated through the developed SWTMS. This work proposes an effective power management strategy for TVNG with high output voltage, which exhibits great potential to promote the development of self‐powered sensors and Industrial Internet of Things (IIoT). [ABSTRACT FROM AUTHOR]

A series of direct‐current tribovoltaic nanogenerators (TVNGs) with high current density have been developed for energy harvesting and mechanical sensing recently, but the lead wires that need to be connected to two relatively moving parts have greatly restricted the application of TVNG. Herein, a freestanding‐mode TVNG (FTVNG) is proposed based on metal, p‐type silicon (p‐Si), and n‐type silicon (n‐Si). As the freestanding part of metal simultaneously rubs against p‐Si and n‐Si, opposite direct current (DC) outputs can be generated, thus forming a DC output from p‐Si to n‐Si in the external circuit. Resulting from the distinctive structure, FTVNGs are applicable for harvesting energy from moving objects without attached wires. Additionally, by using steel needles to precisely control the actual contact area, the electrical output characteristics and influence laws of the tribovoltaic effect under different working parameters such as area and speed are studied. Moreover, FTVNG is integrated into the traditional rolling bearing as a triboelectric bearing, realizing energy recovery from the rotational motion of mechanical parts and speed sensing, which demonstrates the great application potential of TVNG in basic components and parts. [ABSTRACT FROM AUTHOR]

The triboelectric nanogenerator (TENG) is a new energy technology that is enabled by coupled contact electrification and electrostatic induction. The conventional TENGs are usually based on organic polymer insulator materials, which have the limitations and disadvantages of high impedance and alternating output current. Here, a tribovoltaic effect based metal–semiconductor direct‐current triboelectric nanogenerator (MSDC‐TENG) is reported. The tribovoltaic effect is facilitated by direct voltage and current by rubbing a metal/semiconductor on another semiconductor. The frictional energy released by the forming atomic bonds excites nonequilibrium carriers, which are directionally separated to form a current under the built‐in electric field. The continuous average open‐circuit voltage (10–20 mV), short‐circuit direct‐current output (10–20 µA), and low impedance characteristic (0.55–5 kΩ) of the MSDC‐TENG can be observed during relative sliding of the metal and silicon. The working parameters are systematically studied for electric output and impedance characteristics. The results reveal that faster velocity, larger pressure, and smaller area can improve the maximum power density. The internal resistance is mainly determined by the velocity and the electrical resistance of semiconductor. This work not only expands the material candidates of TENGs from organic polymers to semiconductors, but also demonstrates a tribovoltaic effect based electric energy conversion mechanism. [ABSTRACT FROM AUTHOR]