Search

To address the problem of the serious capacity fading in lithium–sulfur batteries, a multi‐functional PEO(polyethylene oxide)/LiFSI (lithium bis(fluorosulfonyl)imide)/PVDF (polyvinylidene fluoride) (PLP) gel polymer electrolyte is exploited by coating PLP on a carbon nanotubes (CNTs) based sulfur cathode (PLP‐S/CNTs) with a controlled thermal annealing process. The annealing process leads to the conformal infusion of PLP through the matrix of S/CNTs with retaining the amorphous phase of the PLP, which enhance the rate performance compared to the bare S/CNTs. The PLP coating drives the transformation of more elemental sulfur to Li2S2/Li2S without forming intermediary product by restraining soluble‐polysulfides formation. Furthermore, the PLP coating successfully inhibits the dissolution of Li2Sx (x > 4) in PEO and prevents the loss of active material in the cathode, which is confirmed by density functional theory calculations. Comprehensively, the PLP coating applied to the surface of the S/CNTs cathode exhibit significantly suppressed shuttle effect and greatly improve long‐term cycle stability of the lithium–sulfur battery. The synthesized PLP‐coated S/CNTs composite cathode demonstrates a high specific capacity of 573.6 mAh g−1 at a current density of 0.5 C after 1 000 cycles, even achieving 318.1 mAh g−1 at an extremely high C‐rate (6 C). which is unprecedented performance among the reported studies on coating technology. [ABSTRACT FROM AUTHOR]

Covalent organic frameworks (COFs), featuring ordered nanopores with numerous accessible redox sites, have drawn much attention as promising electrode materials for rechargeable batteries. Thus far, however, COF‐based battery electrodes have exhibited limited capacity and unsatisfactory cycling stability due to the unwanted side reactions over their large surface area. Herein, a fluorine‐rich covalent organic framework (F‐COF) as an electrode material with improved stability and performance for potassium‐ion batteries is developed. The fluorinated COF not only stabilizes intercalation kinetics of K+ ions but also reinforces its electron affinity and conductivity, improving the reversibility of bond transitions during discharge–charge cycles. As a result, F‐COF affords a high specific capacity (95 mAh g−1 at fast rates up to 5 C) and excellent cycling stability (5000 cycles with ≈99.7% capacity retention), outperforming the pristine COF‐based electrodes devoid of F atoms. Notably, the experimental capacity of F‐COF approaches its theoretical value, confirming that a large proportion of electroactive sites are being actively utilized. Altogether, this work addresses the significant role of F atoms in improving the K+‐ion storage capability of COFs and provides the rational design principles for the continued development of stable and high‐performance organic electrode materials for energy storage devices. [ABSTRACT FROM AUTHOR]

The lithium metal anode is notoriously unstable and reactive to electrolytes, forming brittle solid‐electrolyte interphase (SEI) layers with uneven distribution, exacerbating Li dendrites that ultimately limit the battery life. Here, this work passivates Li metal with electrolyte‐swellable polymer nanolayers deposited monolithically by the initiated chemical vapor deposition (iCVD) to reinforce the native SEI layers and stabilize their interface. The 100 nm iCVD poly(dimethylaminomethyl styrene) (pDMAMS) layer is swelled by 264% under a carbonate electrolyte, establishing the electrolyte‐filled soft scaffold for Li‐ion transport. Notably, the solvogel accommodates homogeneous Li2O‐free and Li2CO3‐rich native SEI layers, providing a record‐high Li‐ion transference number of 0.95 and ionic conductivity of 6.54 mS cm−1. The developed pDMAMS‐Li anodes extend the cycle life by 550% in Li–Li symmetric cells and 600% in LiNi0.6Mn0.2Co0.2O2 full cells compared to pristine Li metal. The mechanistic details of the swollen‐soft‐scaffold strategy are elucidated by depth profile analysis of the pDMAMS homopolymer compared to pDMAMS/electrolyte‐phobic copolymers, providing new insights to manage the interface of liquid‐state electrolyte and solid‐state Li metal by using a novel class of bifunctional solvogel. [ABSTRACT FROM AUTHOR]

Abstract: In response to the demand for flexible and sustainable energy storage devices that exhibit high electrochemical performance, a supercapacitor system is fabricated using mulberry tree‐derived paper as a substrate and Poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate) (PEDOT:PSS) and carbon black as the active material. The mulberry paper‐based supercapacitor system demonstrates high energy density of 29.8–39.8 Wh kg−1 and power density of 2.8–13.9 kW kg−1 with 90.7% retention of its initial capacity over 15 000 charge–discharge cycles. In addition, the mulberry tree fibers are known to have superior mechanical strength and toughness and the mulberry paper‐based supercapacitor; as a result, exhibit high mechanical and chemical toughness; 99% of its initial capacity is retained after 100 repeated applications of bending strains, and twisting. 94% capacity retention is observed even after exposure to HCl and H2SO4 acid solutions. The fabrication methodology of the mulberry‐based supercapacitor is highly scalable and could be stacked to increase the energy storage capacity, where operation of light‐emitting diode lights with a drive voltage of 12 V integrated in a wearable device is demonstrated. [ABSTRACT FROM AUTHOR]