Search

The preparation, characterization and ammonia and water adsorption properties of edge-rich carbon nanofibers (CNFs) were studied, including platelet CNFs (PCNFs) and cup-stacked CNFs (CSCNFs). Since PCNFs and CSCNFs have many chemically active exposed edges, functionalization by oxidizing the edges was carried out by ozone stream and by nitric acid. Transmission electron microscopy, N adsorption isotherms and temperature-programmed desorption analysis showed that the nitric acid treatment partly destroyed the graphite structure of the PCNFs and created acid functional groups and micropores, whereas the ozone treatment created functional groups without damaging the structure. Ammonia adsorption isotherms clarified that NH adsorption on PCNFs and CSCNFs occurred mainly on oxygen-containing groups, whereas the adsorption on activated carbon fibers (ACFs) occurred on both oxygen-containing groups and the carbon surface without the functional groups, and the CSCNFs showed larger amounts of adsorbed ammonia compared to the PCNFs. Especially at a relatively low pressure range (<0.2 atm), the PCNFs/CSCNFs/ACFs showed the same ammonia adsorption mechanism; that is, the one-to-one interaction between oxygen atoms in the functional groups and hydrogen atoms in ammonia molecules. In addition, the adsorption on the ACFs appeared to occur mainly by interaction with the carbon surface at relatively high pressure (0.3-1.0 atm). Our experimental results and previous findings suggest that NH adsorption on PCNFs is due mainly to NH...O hydrogen bonding between oxygen-containing groups and ammonia rather than to chemical bonding. [ABSTRACT FROM AUTHOR]

A novel bioethanol separation process was proposed in this study employing molecular sieving carbon (MSC) as an adsorbent, whose pore diameter is close to molecular size of ethanol. In the proposed process, fermentation broth is first introduced to the adsorption bed packed with MSC. In this step, ethanol is selectively adsorbed onto MSC, with highly enriching ethanol in the micropore of MSC. Subsequently, the concentrated ethanol is desorbed from MSC to gaseous phase, resulting in further purification of ethanol owing to a considerable difference in desorption rate between water and ethanol; Because of molecular sieving effect of MSC, the desorption rate of ethanol is much smaller than that of water. To establish this process, adsorption equilibrium and kinetics of ethanol on various MSCs were investigated in aqueous phase as the first step. Also, desorption kinetics of ethanol and water in gaseous phase were investigated. As a result, it was suggested that highly concentrated ethanol could be obtained with high recovery ratio through these simple operations, meaning the proposed process is quite promising. [ABSTRACT FROM AUTHOR]